Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's NFM21CC222R1H3D is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 2200uF capacitance. It is a feed through capacitor used in applications requiring surface mount filters for noise suppression.
Median Price
$0.113
Lifecycle Status
Suppliers In-Stock
51
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.170
100+ parts
$0.107
1k+ parts
$0.095
10k+ parts
$0.070
DigiKey
$0.116
$0.094
-
TTI Europe
$0.088
Arrow
$0.067
Verical
Newark
$0.117
$0.102
Element14
$0.141
$0.135
$0.118
Farnell
$0.156
$0.144
$0.132
Chip1Stop
$0.109
$0.059
$0.052
Future Electronics
$0.066
TTI
RS (Exports)
$0.253
$0.168
Greenchips
$0.057
$0.054
$0.051
$0.046
TME
$0.120
$0.093
$0.068
Ozdisan Elektronik
$0.122
Nova Conductors
$0.237
Maritex
$0.324
$0.129
$0.089
Component Electronics Inc.
$0.380
$0.290
$0.250
Chip Stock
Velocity Electronics
ComSIT Distribution GmbH
Vyrian
Rutronik
NAC Semi
IBS Electronics
A&K Electronics
Rotakorn
EMSNET
Classic Components Corporation
LIBRA Elektronik GmbH
North Shore Components
Legend Electronics Inc.
QIE Inc.
Speed Components Ltd
Odintec Ltd.
Micros
$0.082
Partservice
Semi Source
Holdelec - ElecDif-Pro
SIE Connect GmbH - GreenChips
A2Z Electronics, Inc.
Bristol Electronics
Micros sp.j. W. Kędra i J. Lic
$0.087
Connector Distribution Corp
Right Parts Inc.
Prism Electronics
DF Sales Co.
Mil-Aero Solutions, Inc.
PC Components Company LLC
Semtec, LLC
Semicontronic
$0.140
Argo Parts USA
$0.230
Corohmni
$0.688
Aztec Data Supply Inc.
$0.970
Advanced Electronics
$1.858
$1.765
Modulus Dynamics
$3.326
Abacus Technologies
Eastek
Electronic Sources GmbH
Continental Prestige Electronics
$0.186
$0.121
$0.108
iodParts Technologies Inc.
Authorized Procurement Solutions
Speed Components Ltd (Excess)
EMSNET (Excess)
Robosynatics
Lucentia Tech
$2.754
$2.698
High insulation resistance ensures safe and reliable operation, protecting the equipment and users from electric shock hazards.
Suitable for filtering applications in low voltage systems, providing effective noise suppression and interference reduction.
Having 3 terminals allows for secure and stable connections, ensuring reliable performance.
Feed through capacitor design offers efficient noise filtering and high capacitance, improving signal quality and performance.
Can operate in high temperature environments without compromising performance, suitable for a wide range of applications.
Capable of functioning in extremely low temperatures, making it versatile and reliable in various environmental conditions.
Tin over nickel finish provides excellent conductivity and corrosion resistance, ensuring long-term durability and reliability.
Compact width allows for space-saving installation, ideal for applications with limited space constraints.
Optimal length for effective filtering and compact design, suitable for small electronic devices and circuit boards.
Convenient tape and reel packaging for easy handling, storage, and automated assembly, improving overall efficiency.
Surface mount installation offers easy and secure mounting on circuit boards, suitable for automated mass production.
Compact dimensions make it suitable for small electronic devices, while providing effective filtering capabilities.
Rated for a current of 1 A, suitable for filtering applications in low to moderate power circuits, ensuring reliable performance.
Low profile height allows for slim and compact design, suitable for applications with height restrictions or space limitations.
High capacitance value provides effective noise filtering and interference suppression, improving overall signal quality and performance.
Data Line Filters NFM21CC222R1H3D attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Additional Features:
Capacitance:
Filter Type:
Height:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
NFM21CC222R1H3D Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
2N2222A
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Swampscott Electronics
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitronic Enterprise
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
Synsemi
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
Kingwell Technonlogy
Good-ark Electronics
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
EMI5204MUTAG
EMI5204MUTAG by Onsemi is a data line filter with 4 functions and 8 terminals. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This surface mount filter is suitable for applications requiring a capacitance of 14 uF and an output impedance of 50 ohm.
ACM90V-701-2PL-TL00
TDK
TDK's ACM90V-701-2PL-TL00 is a Data Line Filter with 80V rated voltage, 10 Mohm insulation resistance, and 5A rated current. It has 2 functions, operates b/w -40 to 125 °C, and offers an output impedance of 700 ohm. Ideal for surface mount applications requiring effective data line filtering.
PA3747.905NL
Pulse Electronics
PA3747.905NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 4 terminals. It operates b/w -40 to 125 °C and has an inductance of 6030 uH. Ideal for applications requiring high output impedance and rated current of 1.45 A.
MMZ2012R301ATD25
MMZ2012R301ATD25 by TDK is a chip bead data line filter with AEC-Q200 screening. Featuring FERRITE CHIP technology, it has 2 terminals and operates b/w -55 to 125 °C. With dimensions of L2.0xB1.25xH0.85 (mm), it's ideal for automotive electronics and industrial applications due to its 300 OHM output impedance and 0.6A rated current capacity.
NFM18CC101R1C3D
Murata Manufacturing
Murata Manufacturing's NFM18CC101R1C3D is a data line filter with 1000 Mohm insulation resistance, 16V rated voltage, and 100uF capacitance. Ideal for applications requiring FEED THROUGH CAPACITOR filters in surface mount configurations.
BNX026H01L
Murata Manufacturing's BNX026H01L is a 50V data line filter with AEC-Q200 screening. It features 4 terminals, rated for 15A current, and has an output impedance of 50 ohms. This surface mount filter operates b/w -55°C to 125°C, making it ideal for automotive and industrial applications.
742792150
Wuerth Elektronik & Kg
Wurth Elektronik 742792150 is a chip data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has 100-550 MHz frequency range, and 80 OHM output impedance. Ideal for surface mount applications in electronics for noise suppression and signal filtering.
MMZ2012R102A
The TDK MMZ2012R102A is a chip bead data line filter with FERRITE CHIP technology. It has a max operating temperature of 125°C and min of -55°C, with dimensions of L2.0xB1.25xH0.85 (mm). Ideal for applications requiring a rated current of 0.5A and output impedance of 1000Ω in surface mount configurations.
742792116
Wuerth Elektronik & Kg 742792116 is a FERRITE CHIP filter with 2 terminals, rated for 2.5A current and output impedance of 500 ohm. Ideal for data line filtering applications, it operates b/w -55 to 125 °C, with dimensions L3.2xB1.6xH1.1 mm and surface mounting type.
P0420NLT
Pulse Electronics P0420NLT is a data line filter with 2 functions, AEC-Q200 screening. It has inductance of 1320uH, max operating temp of 120°C, and rated current of 3.3A. Ideal for automotive applications due to its surface mounting type and compact dimensions (L19.56xB17.02xH9.91mm).
742792645
Wurth Elektronik 742792645 is a FERRITE CHIP Data Line Filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 (mm), it's ideal for surface mount applications in electronics to achieve an output impedance of 470 OHM at a rated current of 1 A.
ILHB0805ER121V
Vishay Dale
FERRITE CHIP; Maximum DC Resistance: .03 ohm; Rated Current: 5 A; Additional Features: NICKEL BARRIER PLATING VIRTUALLY ELIMINATES SILVER MIGRATION; Output Impedance (ohm): 120 OHM; No. of Functions: 1;
BLM15GG221SN1D
Murata's BLM15GG221SN1D is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring a ferrite chip construction, it offers an output impedance of 220 ohm and operates b/w -55°C to 125°C. With dimensions of L1.0xB0.5xH0.5 mm, this filter is designed for frequencies ranging from 100 MHz to 1000 MHz.
DLM11SN900HY2L
Murata's DLM11SN900HY2L is a Data Line Filter with 2 functions, rated at 5V. It offers a min insulation resistance of 100 Mohm and operates b/w -40 to 85 °C. Ideal for applications requiring filtering in data lines due to its compact dimensions of L1.25xB1.0xH0.5 mm and surface mounting type.
MPZ1005S121CT000
TDK's MPZ1005S121CT000 is a chip bead data line filter with 2 terminals, rated for 1.2A current and 120 ohm output impedance. With dimensions of L1.0xB0.5xH0.5 mm, it operates b/w -40 to 85°C and is ideal for surface mount applications in filtering frequencies up to 100 MHz.
7427927291
Wurth Elektronik 7427927291 is a FERRITE CHIP Data Line Filter with AEC-Q200 screening. It has 2 terminals, operates b/w -55 to 125 °C, and offers 0.6 ohm DC resistance. Ideal for surface mount applications in automotive electronics due to its compact size (L1.0XB0.5XH0.5 mm) and rated current of 0.51 A.
BKP0603HS121-T
Taiyo Yuden
BKP0603HS121-T by Taiyo Yuden is a 0201 multilayer chip ferrite data line filter with dimensions of L.6XB.3XH.3 (mm). It has a max operating temperature of 85°C and min frequency of 100 MHz, making it ideal for surface mount applications requiring noise suppression in electronic circuits.
HZ0603B102R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .6 ohm; Material: Ferrite; Rated Current: .2 A; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
BLM18KG601SN1D
Murata Manufacturing's BLM18KG601SN1D is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and 0.8mm width. Operating b/w -55 to 125 °C, it has a DC resistance of 0.15 ohm and output impedance of 600 OHM. Ideal for surface mount applications in electronics for noise suppression at frequencies ranging from 100 MHz.
MPZ1608B471ATD25
MPZ1608B471ATD25 by TDK is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 (mm), it's ideal for applications requiring a 470 OHM output impedance in surface mount configurations up to 1A rated current.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NFM21PC105B1C3D
Murata Manufacturing's NFM21PC105B1C3D is a data line filter with 500 Mohm min insulation resistance, 16V rated voltage, and 1000000 uF capacitance. It is used for feed-through capacitor applications in various electronic devices due to its compact dimensions and surface mounting type.
NFM21CC102R1H3D
Murata Manufacturing's NFM21CC102R1H3D is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and FEED THROUGH CAPACITOR type. It operates b/w -55 to 125 °C and has dimensions of L2.0XB1.25XH0.85 mm. Ideal for applications requiring high capacitance filtering at 1A current rating.
NFM21CC223R1H3D
Murata Manufacturing's NFM21CC223R1H3D is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 22000 uF capacitance. It is a feed-through capacitor suitable for applications requiring filtering in temperatures ranging from -55 to 125 °C.
NFM21PC474R1C3D
FEED THROUGH CAPACITOR; Maximum DC Resistance: .03 ohm; Rated Current: 2 A; Minimum Insulation Resistance: 1000 Mohm; Height: .85 mm; Length: 2 mm;
NFM21PC104R1E3D
Murata Manufacturing's NFM21PC104R1E3D is a data line filter with 1000 Mohm insulation resistance, 25V rated voltage, and 100000 uF capacitance. It is a feed through capacitor used in applications requiring noise filtering and signal conditioning.
NFM21PC224R1C3D
Murata Manufacturing's NFM21PC224R1C3D is a data line filter with 16V rated voltage, 220000uF capacitance, and 2A rated current. It features a feed through capacitor design for noise suppression in electronic circuits. Ideal for surface mount applications where high insulation resistance and temperature tolerance are required.
NFM21PC475B1A3D
Murata Manufacturing's NFM21PC475B1A3D is a data line filter with 100 Mohm insulation resistance, 10V rated voltage, and 4700000 uF capacitance. It is ideal for applications requiring noise suppression in electronic circuits.
NFM21PC105B1A3D
Murata Manufacturing's NFM21PC105B1A3D is a data line filter with 500 Mohm insulation resistance, 10V rated voltage, and 1000000uF capacitance. Ideal for applications requiring noise suppression in electronic circuits.
NFM21CC471R1H3D
FEED THROUGH CAPACITOR; Rated Current: 1 A; Additional Features: C-TYPE CIRCUIT; Maximum Operating Temperature: 125 Cel; Packing Method: TAPE AND REEL; Minimum Insulation Resistance: 1000 Mohm;
NFM21PS106B0J3D
Murata Manufacturing's NFM21PS106B0J3D is a data line filter with 4 terminals, rated at 6.3V and 4A. Featuring a feed-through capacitor type, it offers high insulation resistance of 50 Mohm. Ideal for applications requiring filtering capabilities in electronic circuits operating b/w -40°C to 85°C.
NFM21PC225B0J3D
Murata Manufacturing's NFM21PC225B0J3D is a data line filter with 1 function, rated at 6.3V and 4A. Featuring a feed through capacitor type, it has a capacitance of 2200000uF. Ideal for applications requiring high insulation resistance and operating temperatures ranging from -40 to 85°C.
NFM21CC101U1H3D
NFM21CC101U1H3D by Murata Manufacturing is a data line filter with a capacitance of 100 uF, rated voltage of 50 V, and insulation resistance of 1000 Mohm. It is commonly used in applications requiring noise suppression and filtering in electronic circuits.
NFM21CC223R1H3
Murata Manufacturing's NFM21CC223R1H3 is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 22000 uF capacitance. It is a surface mount feed through capacitor used in applications requiring filtering of electronic signals at temperatures ranging from -55 to 125 °C.
NFM21PC105B1C3
FEED THROUGH CAPACITOR; Rated Current: 4 A; Maximum Operating Temperature: 85 Cel; Minimum Insulation Resistance: 500 Mohm; Height: .85 mm; Mounting Type: SURFACE MOUNT;
NFM21CC221R1H3D
FEED THROUGH CAPACITOR; Rated Current: .7 A; JESD-609 Code: e3; Additional Features: C-TYPE CIRCUIT; Mounting Type: SURFACE MOUNT; Height: .85 mm;
NFM21HC223R1H3D
Murata Manufacturing's NFM21HC223R1H3D is a data line filter with 1000 Mohm insulation resistance, AEC-Q200 screening level, and 50V rated voltage. Ideal for automotive applications due to its FEED THROUGH CAPACITOR type, it operates b/w -55°C to 125°C temperatures and has a capacitance of 22000 uF.
NFM21CC470U1H3D
NFM21CC470U1H3D by Murata Manufacturing is a data line filter with a capacitance of 47 uF, rated voltage of 50 V, and insulation resistance of 1000 Mohm. It is commonly used in applications requiring noise suppression and filtering in electronic circuits.
NFM21HC105R1C3D
FEED THROUGH CAPACITOR; Maximum DC Resistance: .02 ohm; Rated Current: 4 A; Length: 2 mm; Height: .85 mm; Minimum Operating Temperature: -55 Cel;
NFM21PC474R1C3
FEED THROUGH CAPACITOR; Maximum DC Resistance: .03 ohm; Rated Current: 2 A; Rated Voltage: 16 V; Capacitance: 470000 uF; Maximum Operating Temperature: 125 Cel;
NFM21CC222R1H3
FEED THROUGH CAPACITOR; Rated Current: 1 A; Length: 2 mm; Manufacturer Series: NFM21C; JESD-609 Code: e3; Additional Features: C-TYPE CIRCUIT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved