Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MPZ2012S221AT000 by TDK is a chip bead data line filter with dimensions of 2x1.25x0.85mm, suitable for surface mount applications. It has a max operating temperature of 125°C and offers an output impedance of 220 ohms at a min frequency of 100 MHz. Ideal for noise suppression in electronic circuits requiring high-frequency filtering.
Median Price
$0.025
Lifecycle Status
Suppliers In-Stock
52
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.110
100+ parts
$0.054
1k+ parts
$0.036
10k+ parts
$0.026
Newark
$0.114
$0.056
$0.040
-
TTI
TTI Europe
Arrow
$0.020
Verical
DigiKey
$0.023
Element14
$0.074
$0.041
Future Electronics
$0.052
Farnell
$0.022
Chip1Stop
$0.019
$0.016
DF Sales Co.
Nova Conductors
$0.039
Maritex
$0.089
$0.045
$0.031
Bristol Electronics
$0.113
$0.014
Freelance Electronics
$0.391
Chip Stock
Vyrian
NAC Semi
$0.034
Cyclops Electronics Ltd
IBS Electronics
$0.038
Inventory MP
ACDS - Activité Composants Distribution Service
Rutronik
Atlantic Semiconductor
Prism Electronics
LIBRA Elektronik GmbH
Connector Distribution Corp
Right Parts Inc.
First Choice Components Inc.
Component Sense
Elcom Components
Ashlea Components Ltd
Sea View Technologies
BCID Electronics Ltd.
Speed Components Ltd
Semi Source
Semtec, LLC
HZD GmbH
SPM Sales
Rotakorn
A&K Electronics
Contempo Components LLC
A2Z Electronics, Inc.
Connect4Technologies Inc.
Flip Electronics
Sensible Micro Corp
ComSIT Distribution GmbH
ComSIT USA
LWI Electronics Inc
Global Solutions Electronics Company
Ampacity Inc.
$0.018
Semicontronic
$0.017
Argo Parts USA
$0.030
$0.029
Netroflash
Microchip USA
$0.180
Modulus Dynamics
$0.858
Aztec Data Supply Inc.
$1.240
Corohmni
$1.866
Advanced Electronics
$3.312
$3.147
Abacus Technologies
Eastek
Perfect Parts
GreenTree Electronics
Metaverse IC Inc.
Continental Prestige Electronics
Cyclops Electronics Ltd (Excess)
Assy Fe
Futuretech Components
S.R.D Solutions
Kepictronics
Robosynatics
Lucentia Tech
$0.609
$0.596
The use of chip bead construction allows for compact and efficient filtering in a small form factor, making it suitable for tight spaces in electronic devices.
The 0805 case code indicates the specific size and shape of the filter, ensuring compatibility with standard circuit layouts and designs.
Being a ferrite chip filter, it offers high impedance at specific frequencies, effectively reducing electromagnetic interference and noise in signal transmission.
With a high maximum operating temperature of 125°C, this filter can withstand elevated temperatures, providing reliable performance in a variety of environments.
The low minimum operating temperature of -55°C allows for use in cold climates or applications with extended temperature ranges without compromising functionality.
The tin over nickel terminal finish ensures good conductivity and corrosion resistance, extending the lifespan of the filter.
The compact width of 1.25mm enables easy integration into densely packed circuit boards without taking up much space.
With a minimum frequency of 100 MHz, this filter is effective for attenuating noise and interference within this frequency range.
The low maximum DC resistance of 0.04 ohm minimizes power loss and heat generation, contributing to the efficiency of the filter.
The short length of 2mm allows for flexibility in placement and positioning within electronic devices, facilitating optimal signal filtering.
Having a maximum frequency of 100 MHz ensures comprehensive filtering capabilities for high-frequency signals, enhancing overall signal quality.
With an output impedance of 220 ohm, this filter effectively suppresses unwanted signals and maintains signal integrity throughout the circuit.
The tape and reel packing method simplifies handling and storage, making it convenient for high-volume manufacturing and assembly processes.
Designed for surface mount installation, this filter can be easily mounted on PCBs, saving space and streamlining the manufacturing process.
The compact dimensions of 2.0x1.25x0.85mm (LxWxH) or 0.079x0.049x0.033 inches make this filter suitable for applications where space is at a premium.
With a rated current of 3A, this filter can handle high currents without performance degradation, ensuring reliable operation in demanding applications.
The low height of 0.85mm allows for a low-profile design, making it ideal for applications where space constraints are a concern.
Constructed with ferrite material, this filter offers high magnetic permeability, enabling effective noise suppression and improved signal quality.
Data Line Filters MPZ2012S221AT000 attributes and parameters. Explore more Data Line Filters devices from TDK
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
MPZ2012S221AT000 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
NSN
5950-01-660-7639, 5950016607639
NIIN
016607639
PCN Part Number - MMZ,MPS Series Oct/2014
PCN Part Status Change - Mult Devs Allocation 22/Aug/2022
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Eic Semiconductor
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
LM78L05ACMX/NOPB
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
Changzhou Galaxy Century Microelectronics
Zetex Plc
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Weitron Technology
Daco Semiconductor
PBY201209T-601Y-N
Yageo
Yageo's PBY201209T-601Y-N is an 0805 chip bead filter with 2 terminals, matte tin finish. It has a width of 1.25mm, length of 2mm, and height of 0.9mm. With a max frequency of 100 MHz and output impedance of 600 ohm, it is ideal for data line filtering applications.
MPZ1608R391ATA00
TDK
TDK's MPZ1608R391ATA00 is a 0603 chip bead filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for data line filtering applications, it has an output impedance of 390 ohms and can handle a rated current of 1.2A.
28F0121-0SR-10
Laird Technologies
Laird Technologies' 28F0121-0SR-10 is a chip bead data line filter with FERRITE CHIP technology. It operates b/w -45°C to 125°C, has a DC resistance of 0.0007 ohm, and an output impedance of 48 OHM. Ideal for surface mount applications in electronics requiring noise suppression up to 800 MHz.
MMZ1608R102ATA00
TDK MMZ1608R102ATA00 is a 0603 chip bead filter with 2 terminals. It offers max operating temp of 125°C and min of -55°C, with width of 0.8mm and length of 1.6mm. Ideal for data line filtering applications due to its ferrite construction, output impedance of 1000Ω, and rated current of 0.4A.
ACF451832-153-TD01
ACF451832-153-TD01 by TDK is a data line filter with 1000 Mohm insulation resistance, 25 dB attenuation at 70 MHz, and rated voltage of 50 V. It is ideal for applications requiring surface mount filters with dimensions L4.5XB1.8XH3.2 (mm) in tape and reel packaging.
BLM15BD102SN1D
Murata Manufacturing
Murata Manufacturing's BLM15BD102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a max frequency of 100MHz and DC resistance of 0.9 ohm. Ideal for surface mount applications in electronic devices requiring impedance matching and noise suppression up to 1000 ohm output impedance.
MPZ1608S600ATAH0
TDK's MPZ1608S600ATAH0 is a 0603 chip bead data line filter with FERRITE CHIP technology. It offers a max operating temperature of 125°C, DC resistance of 0.02 ohm, and output impedance of 60 OHM. Ideal for applications requiring noise suppression in circuits up to 100 MHz frequency range.
744242510
Wuerth Elektronik & Kg
Wurth Elektronik 744242510 is a Data Line Filter with UL approval, rated voltage of 80V, and inductance of 51uH. It has 2 functions, operates b/w -40°C to 125°C, and offers a max DC resistance of 0.32 ohm. This filter is ideal for applications requiring noise suppression in data lines.
DLW21SN900SQ2L
Murata Manufacturing's DLW21SN900SQ2L is a Data Line Filter with 2 functions, rated at 50V. With a min insulation resistance of 10 Mohm, it operates b/w -40 to 85 °C and has a max DC resistance of 0.35 ohm. This surface mount filter, measuring L2.0xB1.2xH1.2 (mm), is ideal for applications requiring an output impedance of 90 OHM and a rated current of 0.33 A.
CM1402-03CP
CM1402-03CP by Onsemi is a data line filter with 5 functions and 10 terminals. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This surface mount filter has dimensions of L2.005XB1.375XH0.714 (mm) and is suitable for applications requiring a capacitance of 20 uF and an output impedance of 50 ohm.
MPZ1608S121ATAH0
The TDK MPZ1608S121ATAH0 is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 120 ohms and rated current of 2A, suitable for surface mount applications in various electronic devices.
BLM15PG100SN1D
BLM15PG100SN1D by Murata is a chip bead data line filter with 2 terminals, 0402 case code, and ferrite chip construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.025 ohm, and output impedance of 10 OHM. Ideal for applications requiring filtering at frequencies up to 100 MHz in surface mount configurations.
MPZ2012S331ATD25
The TDK MPZ2012S331ATD25 is a FERRITE CHIP filter with 330 OHM output impedance and 2.5 A rated current. With AEC-Q200 screening, it's ideal for automotive applications requiring data line filtering. This surface mount device operates b/w -55 to 125 °C, making it suitable for harsh environments.
BLM18SG121TN1D
Murata Manufacturing's BLM18SG121TN1D is a chip bead data line filter with 2 terminals, rated for 3A current. It operates b/w -55°C to 125°C, offering 120 ohm output impedance at 100MHz frequency. Ideal for surface mount applications requiring effective filtering in compact spaces.
SRF3216-222Y
Bourns
Bourns SRF3216-222Y is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. Ideal for applications requiring high output impedance and low DC resistance in compact surface mount designs.
DLP11TB800UL2L
Murata Manufacturing's DLP11TB800UL2L is a Data Line Filter with 2 functions, rated at 5V. It offers a max operating temperature of 85°C and min insulation resistance of 100 Mohm. Ideal for applications requiring filtering in data lines with dimensions of L1.25xB1.0xH0.3mm.
BLM21PG600SN1
Murata Manufacturing's BLM21PG600SN1 is a FERRITE CHIP data line filter with dimensions 2x1.25x0.85mm, rated current of 3A, and output impedance of 60 ohm. It operates b/w -55 to 125°C, has a max DC resistance of 0.025 ohm, and is designed for surface mount applications in electronic devices.
7427932
Wurth Elektronik 7427932 is a chip data line filter with 2 terminals, Ferrite Bead type, and 125°C max operating temp. Ideal for IEC-approved applications requiring filtering at frequencies b/w 25-100 MHz with low DC resistance of 0.0009 ohm. Suitable for surface mount installation in compact spaces due to its dimensions of L7.8xB4.75xH3.0 mm.
DLW21SN900HQ2L
DLW21SN900HQ2L by Murata Mfg. is a Data Line Filter with 2 functions, rated at 20V and 0.28A. It offers high insulation resistance of 10 Mohm, ideal for applications requiring noise suppression in data lines within a temperature range of -40 to 85°C.
DLW21SN371SQ2L
Murata Manufacturing's DLW21SN371SQ2L is a data line filter with 2 functions, rated at 50V and 0.28A. It offers a min insulation resistance of 10 Mohm, operating b/w -40 to 85 °C. Ideal for applications requiring high impedance filtering in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MPZ2012S102AT000
The TDK MPZ2012S102AT000 is an 0805 chip bead data line filter with a max operating temperature of 125°C and min frequency of 100 MHz. It has a DC resistance of 0.15 ohm, output impedance of 1000 ohm, and rated current of 1.5 A. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.
MPZ2012S601AT000
TDK's MPZ2012S601AT000 is an 0805 chip bead filter with a ferrite chip construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.1 ohm, and output impedance of 600 OHM. Ideal for data line filtering applications due to its compact size and high rated current of 2 A.
MPZ2012S101AT000
TDK's MPZ2012S101AT000 is an 0805 chip bead filter with 2 terminals, ideal for data line applications. With a max operating temp of 125°C and min freq of 100 MHz, it offers low DC resistance at 0.02 ohm. This ferrite chip filter has dimensions of L2.0xB1.25xH0.85 mm and rated current of 4A, suitable for surface mounting in various electronic devices.
MPZ2012S101ATD25
TDK's MPZ2012S101ATD25 is a FERRITE CHIP filter with 2 terminals, rated for 4A current. With dimensions of L2.0xB1.25xH0.85 (mm), it operates b/w -55 to 125 °C and has a max DC resistance of 0.02 ohm. Ideal for data line filtering in automotive applications due to AEC-Q200 screening level compliance.
MPZ2012S601ATD25
The TDK MPZ2012S601ATD25 is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0XB1.25XH0.85 (mm), it is ideal for surface mount applications requiring an output impedance of 600 OHM at a rated current of 2 A.
MPZ2012S102ATD25
TDK's MPZ2012S102ATD25 is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 1000 ohm output impedance. Operating b/w -55°C to 125°C, it is ideal for data line filtering in surface mount applications.
MPZ2012S300AT000
TDK's MPZ2012S300AT000 is a chip bead data line filter with 2 terminals. It operates b/w -55°C to 125°C, offering a max DC resistance of 0.01 ohm and output impedance of 30 ohm at 100 MHz. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
MPZ2012S331AT000
The TDK MPZ2012S331AT000 is an 0805 chip bead data line filter with a max operating temperature of 125°C and min frequency of 100 MHz. With a DC resistance of 0.05 ohm, it is ideal for applications requiring noise suppression in electronic circuits. This surface mount filter has dimensions of L2.0xB1.25xH0.85 (mm) and is commonly used in telecommunications equipment.
MPZ2012S221ATD25
TDK's MPZ2012S221ATD25 is a FERRITE CHIP filter with 2 terminals, rated for 3A current. With dimensions of L2.0xB1.25xH0.85 (mm), it has an output impedance of 220 ohm and max operating temp of 125°C. Ideal for data line filtering applications due to its compact size and surface mounting type.
MPZ2012S601AT
The TDK MPZ2012S601AT is an 0805 chip bead data line filter with a ferrite chip construction. It has a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for applications requiring surface mount filters with dimensions of L2.0xB1.25xH0.85 (mm).
MPZ2012S101AT
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .02 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 4 A;
MPZ2012S601A
The TDK MPZ2012S601A is an 0805 chip bead data line filter with a ferrite chip construction. It operates b/w -55°C to 125°C, has a DC resistance of 0.1 ohm, and output impedance of 600 ohm. Ideal for applications requiring noise suppression in data lines at frequencies up to 100 MHz.
MPZ2012S101A
The TDK MPZ2012S101A is an 0805 chip bead data line filter with 2 terminals. It operates b/w -55°C to 125°C, offering a max DC resistance of 0.02 ohm and output impedance of 100 ohm at 100 MHz. Ideal for surface mount applications, it provides effective filtering in electronic circuits requiring noise suppression.
FERRITE CHIP; Maximum DC Resistance: .05 ohm; Rated Current: 2.5 A; Maximum Operating Temperature: 125 Cel; Dimensions: L2.0XB1.25XH0.85 (mm)/L0.079XB0.049XH0.033 (inch); Additional Features: AEC-Q200;
MPZ2012S300AT
The TDK MPZ2012S300AT is an 0805 chip bead filter with 2 terminals. With a max operating temp of 125°C and min of -55°C, it offers low DC resistance of 0.01 ohm and output impedance of 30Ω. Ideal for data line filtering applications due to its compact size (L2.0xB1.25xH0.85 mm) and high rated current of 6A.
MPZ2012S102AT
The TDK MPZ2012S102AT is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0xB1.25xH0.85 (mm), it offers a DC resistance of 0.15 ohm, suitable for applications requiring output impedance of 1000 OHM at frequencies ranging from 100 MHz.
MPZ2012S300ATD25
MPZ2012S300ATD25 by TDK is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C, with dimensions of L2.0xB1.25xH0.85 (mm). Ideal for applications requiring a rated current of 6A and output impedance of 30 ohms in surface mount configurations.
MPZ2012S221AT
The TDK MPZ2012S221AT is an 0805 chip bead data line filter with a max operating temperature of 125°C and min frequency of 100 MHz. With a DC resistance of 0.04 ohm, it is ideal for applications requiring noise suppression in electronic circuits. Its compact dimensions make it suitable for surface mount installations in various devices.
MPZ2012S221A
The TDK MPZ2012S221A is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 125°C, offering a DC resistance of 0.04 ohm and output impedance of 220 ohm at 100 MHz. Ideal for data line filtering applications due to its compact size and high rated current of 3 A.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved