Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 744242220 is a Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 22uH. It operates b/w -40 to 125 °C and has a max DC resistance of 0.23 ohm. Ideal for applications requiring filtering on data lines with UL approval.
Median Price
$3.140
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.130
100+ parts
-
1k+ parts
10k+ parts
Newark
$1.380
Farnell
$2.940
$1.580
$1.510
Bürklin Elektronik
$3.340
$2.700
$2.500
Mouser Electronics
$3.580
$2.900
$2.470
Element14
$3.831
$1.886
$1.677
$1.618
Nova Conductors
$2.585
VNN
ComSIT Distribution GmbH
Vyrian
ACDS - Activité Composants Distribution Service
Advanced Electronics
$0.846
$0.770
$0.694
Semicontronic
$0.960
$0.936
$0.931
Aztec Data Supply Inc.
$1.890
Ampacity Inc.
$2.090
Argo Parts USA
$2.445
Corohmni
$2.471
Netroflash
Modulus Dynamics
$2.869
$2.841
$2.755
Perfect Parts
Kepictronics
Robosynatics
Lucentia Tech
$0.388
Continental Prestige Electronics
$2.330
$1.940
Having UL approval ensures that this data line filter meets safety standards and regulations, making it a reliable choice for use in various applications.
With 2 functions, this data line filter can effectively filter out noise and interference, resulting in cleaner data transmission.
The high rated voltage of 80V allows this filter to handle a wide range of voltage levels, making it versatile for different electronic devices.
The inductance of 22uH helps in filtering out unwanted frequencies and ensures smoother data transmission.
The low DC resistance of 0.23 ohm minimizes power loss and ensures efficient filtering performance of this data line filter.
Being surface mountable allows for easy and convenient installation of this data line filter on PCBs, saving space and simplifying the assembly process.
Data Line Filters 744242220 attributes and parameters. Explore more Data Line Filters devices from Wurth Elektronik
Approvals (V):
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
744242220 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
American Power Devices
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
LM358DR2G
Onsemi
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
M24308/2-1F
Cinch Connectivity Solutions
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Body Depth: .375 inch;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Central Semiconductor
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
National Semiconductor
BLM15AX121SN1D
Murata Manufacturing
Murata Manufacturing's BLM15AX121SN1D is a chip bead data line filter with 2 terminals, rated for 0.7A current and 120 ohm output impedance. It operates b/w -55 to 125 °C, with dimensions of L1.0xB0.5xH0.5 mm and is used in surface mount applications for filtering frequencies up to 100 MHz.
MPZ2012S221A
TDK
The TDK MPZ2012S221A is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 125°C, offering a DC resistance of 0.04 ohm and output impedance of 220 ohm at 100 MHz. Ideal for data line filtering applications due to its compact size and high rated current of 3 A.
DLW5AHN402SQ2L
Murata Manufacturing's DLW5AHN402SQ2L is a data line filter with 2 functions, rated at 50V and 0.2A. With dimensions of L5.0xB3.6xH4.3 (mm), it operates b/w -25°C to 85°C, offering max DC resistance of 3 ohm and output impedance of 4000 ohm. Ideal for surface mount applications requiring high insulation resistance up to 10 Mohm.
74279252
Wuerth Elektronik & Kg
Wurth Elektronik 74279252 is a multi-layer ferrite chip filter with AEC-Q200 screening. With dimensions of L4.5XB3.2XH1.5 (mm), it operates b/w -55 to 125 °C, suitable for data line filtering in automotive applications at frequencies ranging from 100 MHz to 108 MHz.
B82790C0513N201
TDK B82790C0513N201 is a 2-function data line filter with 80V rated voltage and 51uH inductance. It has 4 terminals, matte tin over nickel finish, and 0.14 ohm max DC resistance. Ideal for applications requiring a compact surface mount filter with 50 ohm output impedance.
74279221601
Wurth Elektronik 74279221601 is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 2.5A current and 600Ω output impedance. It operates b/w -55°C to 125°C, ideal for surface mount applications requiring noise suppression in electronic circuits.
BLM18KG331SN1D
Murata Manufacturing's BLM18KG331SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max DC resistance of 0.08 ohm and output impedance of 330 OHM at 100 MHz frequency. Ideal for surface mount applications in electronic devices requiring noise suppression.
ACM1513-551-2PL-TLHF
ACM1513-551-2PL-TLHF by TDK is a Data Line Filter with 10A rated current, 50V rated voltage, and 550 ohm output impedance. It has 2 functions and operates b/w -40°C to 85°C. Ideal for applications requiring noise filtering in data lines.
742792663
Wurth Elektronik 742792663 is a 0603 multi-layer FERRITE CHIP filter with dimensions L1.6XB0.8XH0.8 (mm). It operates b/w -55 to 125 °C, has a max frequency of 150 MHz, and DC resistance of 0.85 ohm. Ideal for data line filtering applications due to its surface mount design and output impedance of 1000 OHM.
FBMJ1608HS220NTR
Taiyo Yuden
Taiyo Yuden's FBMJ1608HS220NTR is a chip bead data line filter with dimensions 1.6x0.8x0.8mm, suitable for surface mount applications. Featuring a max operating temperature of 125°C and rated current of 7.5A, it offers a min frequency of 100MHz and max DC resistance of 0.004 ohm, making it ideal for noise suppression in electronic circuits.
742792693
Wurth Elektronik 742792693 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.6xB0.8xH0.8 mm and output impedance of 2200 ohm at frequencies ranging from 100 MHz to 110 MHz.
7427927310
7427927310 by Wurth Elektronik is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 2A current. It operates b/w -55°C to 125°C, has a max DC resistance of 0.03 ohm, and an output impedance of 10 ohm. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
FLT007A0Z
Abb
Abb FLT007A0Z is a 2-function data line filter with UL, CSA, VDE, EN approvals. Rated for 75V and 7A, it operates b/w -40 to 85°C. Ideal for applications requiring through-hole mounting and filtering of data lines.
BLM21AG102SN1D
Murata Manufacturing's BLM21AG102SN1D is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 125 °C, offering 0.28 ohm DC resistance and 1000 OHM output impedance at 100 MHz. Ideal for data line filtering applications, it measures L2.0XB1.25XH0.85 mm and has a rated current of 0.5 A.
742792620
Wurth Elektronik 742792620 is a FERRITE CHIP filter with 2 terminals, rated for 1.65A current. It operates b/w -55°C to 125°C, with dimensions of L1.6xB0.8xH0.8 (mm). Ideal for data line filtering in surface mount applications due to its low DC resistance of 0.15 ohm and output impedance of 100 ohm.
BMB2A0120AN4
TE Connectivity
TE Connectivity's BMB2A0120AN4 is a 0805 case FERRITE CHIP filter with 120 OHM output impedance. With dimensions of L2.0XB1.2XH0.9 (mm), it operates b/w -55 to 125 °C and has a max frequency of 100 MHz. Ideal for data line filtering applications, this surface mount chip offers low DC resistance at 0.3 ohm and rated current of 0.3 A.
744224
Wuerth Elektronik & Kg 744224 Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 250uH. UL approved for applications requiring output impedance of 1800 ohm and rated current of 1.2A. Ideal for surface mount installations in electronics to filter data lines efficiently.
BLM18EG221SN1J
Murata Manufacturing's BLM18EG221SN1J is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L1.6XB0.8XH0.8 (mm), it offers a max frequency of 1000 MHz and DC resistance of 0.05 ohm. Ideal for surface mount applications, this ferrite chip filter has an output impedance of 260 OHM and rated current of 2 A.
BLM18PG471SN1J
Murata Manufacturing's BLM18PG471SN1J is a chip bead data line filter with 2 terminals, 0603 case code, and ferrite chip construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.2 ohm, and output impedance of 470 OHM. Ideal for surface mount applications in electronics for noise suppression at frequencies up to 100 MHz.
FLTR75V05Z
FLTR75V05Z by Abb is a 2-function data line filter module with UL, CAN, CSA, VDE, EN approvals. It operates at 75V and 5A with max DC resistance of 0.02 ohm. Ideal for applications requiring filtering in data lines due to its compact dimensions and wide temperature range (-40°C to 100°C).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
744232090
Wurth Elektronik
Wurth Elektronik 744232090 Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 125°C. Ideal for applications requiring surface mount filters with dimensions L3.2xB1.6xH1.9mm in tape and reel packaging.
744231091
Wurth Elektronik 744231091 is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. It has 4 terminals, tin finish, and dimensions of L2.0xB1.2xH1.2 (mm). Ideal for applications requiring filtering in data lines with a current rating of 0.37A.
744227S
744227S by Wurth Elektronik is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 51uH. It operates b/w -40°C to 125°C, has a max DC resistance of 0.16 ohm, and output impedance of 5500 ohm. Ideal for surface mount applications requiring a compact L9.2xB6.0xH5.0mm size and rated current of 1A.
744222
Wurth Elektronik 744222 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 1000uH and max DC resistance of 0.31 ohm, it operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with dimensions L9.2XB6.0XH5.0mm, such as electronic devices needing noise suppression on data lines.
744230900
Wurth Elektronik 744230900 is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 105°C. Ideal for surface mount applications, it has dimensions of L1.6xB0.85xH1.1 (mm) and output impedance of 90 ohm.
744232222
Wurth Elektronik 744232222 is a Data Line Filter with 2 functions, rated at 50V. It has 4 terminals and operates b/w -40 to 125°C. With dimensions of L3.2xB1.6xH1.9 (mm), it offers an output impedance of 2200Ω and max DC resistance of 1.2Ω, suitable for surface mount applications in various electronic devices.
744227
Wurth Elektronik 744227 is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 51uH. Ideal for applications requiring surface mount filters with dimensions of L9.2xB6.0xH5.0mm, it operates b/w -40°C to 125°C and has a max DC resistance of 0.16 ohm.
744226S
DATA LINE FILTER; Maximum DC Resistance: .08 ohm; Rated Current: 1.6 A; Output Impedance (ohm): 920 OHM; Width (mm): 6.0; No. of Terminals: 4;
744242510
Wurth Elektronik 744242510 is a Data Line Filter with UL approval, rated voltage of 80V, and inductance of 51uH. It has 2 functions, operates b/w -40°C to 125°C, and offers a max DC resistance of 0.32 ohm. This filter is ideal for applications requiring noise suppression in data lines.
744272471
DATA LINE FILTER; Maximum DC Resistance: .065 ohm; Rated Current: 1.6 A; Mounting Type: SURFACE MOUNT; Length: 10 mm; Packing Method: TAPE AND REEL;
744223
Wurth Elektronik 744223 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 500uH and max DC resistance of 0.15 ohm, it's ideal for applications requiring output impedance of 3300 OHM. This surface mount filter operates b/w -40 to 125 °C, making it suitable for various electronic devices.
744273501
Wurth Elektronik 744273501 is a Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 5uH. It operates b/w -40°C to 125°C, has Tin/Copper terminals, and dimensions of L9.5xB8.3xH5.3mm. Ideal for applications requiring a max current of 5A and output impedance of 500Ω in surface mount configurations.
744220203
Wurth Elektronik 744220203 is a Data Line Filter with 2 functions and rated voltage of 80V. It has inductance of 20000uH, max operating temp of 125°C, and DC resistance of 2.6 ohm. Ideal for applications requiring noise suppression in data lines with approval from IEC standards.
744226
DATA LINE FILTER; Maximum DC Resistance: .08 ohm; Rated Current: 1.6 A; Width (mm): 6.0; No. of Functions: 2; Inductance: 10 uH;
744220
Wurth Elektronik 744220 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 4.7uH and max DC resistance of 0.75 ohm, it's ideal for applications requiring a surface mount filter with dimensions L9.2XB6.0XH5.0 (mm).
744220103
DATA LINE FILTER; Maximum DC Resistance: 1.2 ohm; Rated Current: .35 A; No. of Terminals: 4; Packing Method: TR, EMBOSSED, 13 INCH; Height: 5 mm;
744231371
DATA LINE FILTER; Maximum DC Resistance: .45 ohm; Rated Current: .28 A; Terminal Finish: Tin (Sn); Rated Voltage: 50 V; No. of Terminals: 4;
744272121
Wurth Elektronik 744272121 is a Data Line Filter with 2 functions, rated at 80V. It has inductance of 120uH and operates b/w -40 to 125°C. Ideal for applications requiring filtering of data lines, it offers low DC resistance of 0.025 ohm and output impedance of 460Ω.
744242330
DATA LINE FILTER; Maximum DC Resistance: .27 ohm; Rated Current: .3 A; Inductance: 33 uH; Maximum Operating Temperature: 125 Cel; Output Impedance (ohm): 2000 OHM;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved