Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's BLM21RK102SN1D is an 0805 chip bead filter with 2 terminals. It operates b/w -55°C to 125°C, has a DC resistance of 0.5 ohm, and output impedance of 1000 ohm at 100 MHz. Ideal for data line filtering applications due to its ferrite material and surface mounting type.
Median Price
$0.054
Lifecycle Status
Suppliers In-Stock
33
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.150
100+ parts
$0.076
1k+ parts
$0.051
10k+ parts
$0.035
Mouser Electronics
$0.042
Future Electronics
$0.240
$0.143
$0.114
$0.080
Chip1Stop
-
$0.071
$0.048
$0.031
Verical
$0.028
TTI Europe
$0.032
Newark
$0.110
$0.063
Avnet
Arrow
$0.036
Farnell
Element14
$0.074
$0.059
RS (Exports)
$0.020
Nova Conductors
$0.058
Maritex
$0.077
TME
$0.190
$0.095
$0.062
$0.047
IBS Electronics
$0.337
Vyrian
Chip Stock
Semi Source
Rutronik
Bristol Electronics
Lantek
Cogito LLC
PC Components Company LLC
Micros
Partservice
$0.161
$0.029
Micros sp.j. W. Kędra i J. Lic
$0.172
Martec Srl
Speed Components Ltd
EMSNET
LIBRA Elektronik GmbH
VNN
Elcom Components
Semicontronic
$0.037
Argo Parts USA
$0.057
Corohmni
$1.473
Aztec Data Supply Inc.
$2.140
Advanced Electronics
$2.423
$2.301
Modulus Dynamics
$3.082
Eastek
GreenTree Electronics
Perfect Parts
Glotronic Ltd.
Authorized Procurement Solutions
Kepictronics
Abacus Technologies
Robosynatics
$2.566
$2.513
Lucentia Tech
Netroflash
$0.056
Continental Prestige Electronics
$0.038
Chip bead construction provides efficient filtering of electromagnetic interference, ensuring reliable data transmission.
Having 2 terminals allows for easy connection in a circuit, simplifying installation.
0805 case code is a common size, making it compatible with standard circuit board layouts.
Ferrite chip filters are highly effective at suppressing high frequency interference, improving signal quality.
With a high maximum operating temperature, this filter can withstand demanding operating conditions.
The low minimum operating temperature ensures this filter remains functional in a wide range of environments.
TIN terminal finish provides good conductivity, ensuring reliable signal transmission.
Slim width of 1.25mm allows for easy integration into compact circuit designs.
Works effectively at minimum frequency of 100 MHz, suitable for many data transmission applications.
Low DC resistance minimizes power loss and ensures efficient filtering of noise.
Compact length of 2mm enables space-saving installation.
Capable of filtering signals up to 100 MHz, making it versatile for various frequency ranges.
Output impedance of 1000 ohms provides impedance matching and improves signal integrity.
Tape and reel packaging allows for easy handling, storage, and automated assembly.
Surface mount design simplifies installation on PCBs, reducing manufacturing time and costs.
Compact dimensions make it suitable for space-constrained applications while maintaining high performance.
Rated current of 0.2A allows for safe operation within specified limits, protecting the filter and connected devices.
Low profile height of 0.85mm enables installation in slim devices or densely packed circuits.
Ferrite material offers high magnetic permeability, essential for effective EMI suppression.
Data Line Filters BLM21RK102SN1D attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Additional Features:
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
BLM21RK102SN1D Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
1N4148
Frontier Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
Grande Electronics
Vicor
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Galaxy Century Microelectronics
General Instrument
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
Hitano Enterprise
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
STM32H750VBT6
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
744224
Wuerth Elektronik & Kg
Wuerth Elektronik & Kg 744224 Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 250uH. UL approved for applications requiring output impedance of 1800 ohm and rated current of 1.2A. Ideal for surface mount installations in electronics to filter data lines efficiently.
NFL21SP506X1C3D
Murata Manufacturing
Murata Manufacturing's NFL21SP506X1C3D is a 16V data line filter with 1000 Mohm insulation resistance. Featuring 0.305uH inductance, it operates b/w -55 to 125 °C and has a rated current of 0.15A. Ideal for applications requiring noise suppression in data lines with three terminals, this surface mount filter measures L2.0xB1.25xH0.85mm and uses TIN terminal finish.
NFM41PC155B1E3L
Murata Manufacturing's NFM41PC155B1E3L is a data line filter with 1500000uF capacitance, 25V rated voltage, and 6A rated current. It is a feed through capacitor used in applications requiring noise suppression and signal filtering in electronic circuits.
54-844-001
Api Technologies
54-844-001 by Api Technologies is a UL/CSA approved data line filter with a rated voltage of 600V. Featuring a feed through capacitor, it offers max insertion loss of 50dB and capacitance of 4700uF. Ideal for panel mounting applications, this filter operates at temperatures up to 125°C.
MH2029-301Y
Bourns MH2029-301Y is a chip bead data line filter with 2 terminals. It offers 0.2 Mohm min insulation resistance, 100 MHz min frequency, and 1 A rated current. Ideal for applications requiring surface mount filters in compact dimensions like L2.0XB1.2XH0.9 (mm).
MPZ2012S102AT000
TDK
The TDK MPZ2012S102AT000 is an 0805 chip bead data line filter with a max operating temperature of 125°C and min frequency of 100 MHz. It has a DC resistance of 0.15 ohm, output impedance of 1000 ohm, and rated current of 1.5 A. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering capabilities.
NFM3DCC471R1H3L
Murata Manufacturing's NFM3DCC471R1H3L is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 470uF capacitance. It is a feed-through capacitor suitable for surface mount applications in various electronic devices operating b/w -55 to 125 °C.
BLM21BB331SN1D
Murata's BLM21BB331SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55°C to 125°C. With a DC resistance of 0.33 ohm, it offers a max frequency of 100 MHz and output impedance of 330 OHM. Ideal for data line filtering applications due to its compact size and surface mounting type.
NFM41PC204F1H3B
Murata Manufacturing's NFM41PC204F1H3B is a FEED THROUGH CAPACITOR with 1000 Mohm insulation resistance, 50V rated voltage, and 200000 uF capacitance. Ideal for data line filtering applications due to its compact size (L4.5XB1.6XH1.0 mm), high current rating of 2A, and wide operating temperature range (-55 to 85 °C).
BLM21AG471SN1D
BLM21AG471SN1D by Murata Manufacturing is a chip bead data line filter with 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L2.0XB1.25XH0.85 (mm) and is commonly used for surface mount applications in electronic devices.
BLM21BD471SN1D
Murata's BLM21BD471SN1D is an 0805 chip bead filter with 470 OHM output impedance, 0.35 ohm DC resistance, and 100 MHz frequency range. Ideal for data line filtering applications due to its compact size (L2.0XB1.25XH0.85 mm) and surface mounting type.
744212331
Wurth Elektronik 744212331 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 330uH and max DC resistance of 0.3 ohm, it operates b/w -40 to 105 °C. Ideal for surface mount applications, dimensions are L6.5xB3.6xH1.65 mm, suitable for filtering data lines with an output impedance of 2000 OHM.
SBSPP1000103MXT
Knowles Precision Devices
SBSPP1000103MXT by Knowles Precision Devices is a 100 V rated data line filter with inductance of 0.25 uH, max insertion loss of 60 dB, and max DC resistance of 0.5 ohm. It is ideal for surface mount applications requiring high capacitance filtering in a compact L3.2XB1.6XH1.6 mm package.
742792693
Wurth Elektronik 742792693 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.6xB0.8xH0.8 mm and output impedance of 2200 ohm at frequencies ranging from 100 MHz to 110 MHz.
BLM18PG300SN1D
BLM18PG300SN1D by Murata is a chip bead data line filter with 2 terminals, rated current of 1A, and output impedance of 30 ohm. It operates b/w -55 to 125 °C and has dimensions of L1.6xB0.8xH0.8 mm. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
BLM18KG221SH1D
Murata Manufacturing's BLM18KG221SH1D is a FERRITE CHIP filter with 220 OHM output impedance, 1.5A rated current, and -55 to 125 °C operating temperature range. It is ideal for data line filtering applications due to its AEC-Q200 screening level and surface mounting type.
74270053
The Wurth Elektronik 74270053 is a data line filter with a ferrite bead filter type. It has a max operating temperature of 125°C and min operating temperature of -25°C. With dimensions of D16.0XH28.5 (mm), it is suitable for stud mount applications and has an output impedance of 258 ohms.
4300-009LF
Tusonix
FEED THROUGH CAPACITOR; Rated Current: 5 A; Height: 2.79 mm; Mounting Type: PANEL MOUNT; JESD-609 Code: e4; Maximum Insertion Loss: 25 dB;
PA3747.146NL
Pulse Electronics
PA3747.146NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 9100 uH inductance. It operates b/w -40 to 125 °C and has a max DC resistance of 0.207 ohm. Ideal for applications requiring through hole mounting, rated current of 1A, and an output impedance of 42690 OHM.
NFE31PT152Z1E9L
Murata Manufacturing's NFE31PT152Z1E9L is a 3-terminal data line filter with 1000 Mohm insulation resistance and 25V rated voltage. With a capacitance of 1500uF, it operates b/w -40 to 85 °C, making it ideal for surface mount applications requiring up to 6A current.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BLM21PG221SN1D
Murata Manufacturing's BLM21PG221SN1D is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a width of 1.25mm and length of 2mm, it offers a max frequency of 100MHz and DC resistance of 0.05 ohm. Ideal for data line filtering applications due to its ferrite material and output impedance of 220 ohm.
BLM21PG300SN1D
BLM21PG300SN1D by Murata is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a DC resistance of 0.014 ohm, it offers output impedance of 30Ω at 100MHz. Ideal for data line filtering applications due to its compact size and high rated current of 2.3A.
BLM21PG331SN1D
BLM21PG331SN1D by Murata is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a DC resistance of 0.07 ohm and output impedance of 330 ohm, it's ideal for data line filtering applications at frequencies ranging from 100 MHz.
BLM21AG102SN1D
Murata Manufacturing's BLM21AG102SN1D is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 125 °C, offering 0.28 ohm DC resistance and 1000 OHM output impedance at 100 MHz. Ideal for data line filtering applications, it measures L2.0XB1.25XH0.85 mm and has a rated current of 0.5 A.
BLM21PG600SN1D
Murata Manufacturing's BLM21PG600SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55°C to 125°C. With a width of 1.25mm and length of 2mm, it offers a max DC resistance of 0.025 ohm and output impedance of 60 ohm at frequencies ranging from 100 MHz. Ideal for data line filtering applications, this surface mount component has a rated current of 3A and uses ferrite material for effective noise suppression.
BLM21AG121SN1D
Murata Manufacturing's BLM21AG121SN1D is an 0805 chip bead filter with 2 terminals. It operates b/w -55°C to 125°C, offering a max DC resistance of 0.09 ohm and output impedance of 120 ohm at frequencies ranging from 100 MHz. Ideal for data line filtering applications due to its compact size and surface mounting type.
BLM21AG601SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .21 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .6 A;
BLM21PG220SN1D
BLM21PG220SN1D by Murata is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 125 °C and has a DC resistance of 0.01 ohm. With dimensions of L2.0XB1.25XH0.85 (mm), it's ideal for data line filtering applications at frequencies ranging from 100 MHz, offering an output impedance of 22 OHM and a rated current of 6 A.
BLM21PG121SN1D
Murata Manufacturing's BLM21PG121SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. With a DC resistance of 0.03 ohm and output impedance of 120 OHM, it's ideal for data line filtering applications at frequencies ranging from 100 MHz.
BLM21PG221SN1B
BLM21PG221SN1B by Murata is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a width of 1.25mm and length of 2mm, it offers a max frequency of 100MHz and DC resistance of 0.05 ohm. Ideal for data line filtering applications due to its ferrite chip construction and output impedance of 220 ohm at rated current of 2A.
BLM21AH102SN1D
Murata Manufacturing's BLM21AH102SN1D is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 85°C, offering a DC resistance of 0.45 ohm and output impedance of 1000 ohm at 100 MHz. Ideal for data line filtering applications due to its compact size and high impedance characteristics.
BLM21PG221SN1J
Murata Manufacturing's BLM21PG221SN1J is an 0805 chip bead filter with 2 terminals, operating from -55 to 125 °C. With a width of 1.25mm and length of 2mm, it offers an output impedance of 220 ohm for data line filtering applications at frequencies ranging from 100 MHz.
BLM21PG221SH1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .045 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1.25 A;
BLM21PG221SN1
Murata Manufacturing's BLM21PG221SN1 is a FERRITE CHIP filter with 2 terminals, rated for 2A current. With dimensions of L2.0XB1.25XH0.85 (mm), it offers an output impedance of 220 ohm and max DC resistance of 0.05 ohm. Ideal for data line filtering applications, it operates b/w -55 to 125 °C in surface mount configurations.
BLM21PG331SN1B
Murata Manufacturing's BLM21PG331SN1B is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.07 ohm, output impedance of 330 OHM, and rated current of 1 A. Ideal for data line filtering applications due to its ferrite construction and surface mounting type.
BLM21PG331SN1J
BLM21PG331SN1J by Murata Manufacturing is a chip bead data line filter with 2 terminals and an 0805 case code. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L2.0XB1.25XH0.85 (mm) and is commonly used for surface mount applications to provide impedance of 330 OHM at a rated current of 1 A.
BLM21BD222TN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .6 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .2 A;
BLM21BB121SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .19 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .6 A;
BLM21RK102SN1C
FERRITE CHIP; Maximum DC Resistance: .5 ohm; Rated Current: .2 A; Packing Method: BULK; Mounting Type: SURFACE MOUNT; Height: .85 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved