Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's BLM21AG102SN1D is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 125 °C, offering 0.28 ohm DC resistance and 1000 OHM output impedance at 100 MHz. Ideal for data line filtering applications, it measures L2.0XB1.25XH0.85 mm and has a rated current of 0.5 A.
Median Price
$0.071
Lifecycle Status
Suppliers In-Stock
71
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.160
100+ parts
$0.080
1k+ parts
$0.053
10k+ parts
-
Mouser Electronics
$0.079
$0.040
Newark
$0.162
$0.081
$0.055
$0.042
Adafruit Industries
$1.540
$1.463
Verical
$0.068
TTI
$0.037
TTI Europe
$0.034
Future Electronics
$0.136
Chip1Stop
$0.028
Element14
$5.000
$3.730
$3.220
Arrow
Farnell
$0.046
RS (Exports)
Distrelec
DF Sales Co.
EXC GmbH
Greenchips
$0.036
$0.035
$0.033
$0.030
Nova Conductors
$0.060
TME
$0.150
$0.050
Bristol Electronics
$0.208
$0.104
$0.026
Component Electronics Inc.
$0.770
$0.580
$0.500
IBS Electronics
$0.192
Sensible Micro Corp
Vyrian
Chip Stock
NAC Semi
$0.276
Prism Electronics
Dan-Mar Components
Zilex Electronics Inc.
ACDS - Activité Composants Distribution Service
Schukat
$0.038
Rebound Electronics
Cyclops Electronics Ltd
SIE Connect GmbH - GreenChips
Semi Source
Connector Distribution Corp
Right Parts Inc.
Elcom Components
EMSNET
Atlantic Semiconductor
SPM Sales
Lantek
J2 Sourcing AB
PC Components Company LLC
Avant Electronics Limited
Pegasus Components GmbH
QIE Inc.
Rutronik
A&K Electronics
Rotakorn
Contempo Components LLC
Micros sp.j. W. Kędra i J. Lic
$0.175
$0.032
Micros
North Shore Components
Component Sense
LIBRA Elektronik GmbH
NPI Materials, Inc.
ComSIT Distribution GmbH
Semtec, LLC
Connect4Technologies Inc.
Resion
Bas Electronics GmbH & Co. KG
Tectiva GmbH
Speed Components Ltd
Halfin
ABC Electronics Ltd.
Cogito LLC
South Electronics
VNN
Martec Srl
Semicontronic
$0.022
$0.021
Argo Parts USA
$0.048
$0.047
Netroflash
$0.059
Corohmni
$1.066
Advanced Electronics
Aztec Data Supply Inc.
$2.208
Modulus Dynamics
$3.404
Abacus Technologies
GreenTree Electronics
Assy Fe
Continental Prestige Electronics
Formix International (Excess)
iodParts Technologies Inc.
Cyclops Electronics Ltd (Excess)
EMSNET (Excess)
Infinite Electronics LLP (Excess)
Alle Elektronik GmbH
Futuretech Components
Eastek
Robosynatics
$1.835
$1.797
Lucentia Tech
Kepictronics
Chip Beads are small in size and offer excellent EMI/RFI filtering capabilities, making this product suitable for compact electronic devices.
With a high maximum operating temperature, this product is suitable for a wide range of operating environments, ensuring reliability and durability.
The minimum frequency of 100 MHz ensures effective filtering of high-frequency noise, improving the overall performance of the electronic system.
The low DC resistance of 0.28 ohm helps in minimizing power losses and maintaining signal integrity in the circuit.
With an output impedance of 1000 ohms, this product provides effective impedance matching, reducing signal reflections and improving signal quality.
The rated current of 0.5 A allows this product to handle moderate current levels, making it suitable for a variety of electronic applications.
Data Line Filters BLM21AG102SN1D attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Additional Features:
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
BLM21AG102SN1D Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
NSN
5950-01-614-7463, 5950016147463, 5950-01-615-2891, 5950016152891
NIIN
016147463, 016152891
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EU2B-YS3303C
Idec
ROTARY SWITCH;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
EU2B-YS303C
Lite-on Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Onsemi
LL4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
Won-top Electronics
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
Baneasa S A
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
Vicor
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ECLAMP2456P.TCT
Semtech
Semtech's ECLAMP2456P.TCT is a 5V data line filter with 6 functions and 12 terminals. It offers 40 dB attenuation at 2700 MHz, operating from -40 to 85°C. Ideal for applications requiring surface mount filters with dimensions of L3.1xB1.7xH0.65 mm in plastic packaging on tape and reel.
744227
Wuerth Elektronik & Kg
Wurth Elektronik 744227 is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 51uH. Ideal for applications requiring surface mount filters with dimensions of L9.2xB6.0xH5.0mm, it operates b/w -40°C to 125°C and has a max DC resistance of 0.16 ohm.
742792021
742792021 by Wurth Elektronik is a FERRITE CHIP Data Line Filter with dimensions of L2.0XB1.2XH0.9 (mm). It has a Max Operating Temperature of 125°C and Min Frequency of 100 MHz, suitable for surface mount applications in electronic circuits requiring noise suppression and signal filtering up to 1000 MHz.
BLM18KG601SN1D
Murata Manufacturing
Murata Manufacturing's BLM18KG601SN1D is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and 0.8mm width. Operating b/w -55 to 125 °C, it has a DC resistance of 0.15 ohm and output impedance of 600 OHM. Ideal for surface mount applications in electronics for noise suppression at frequencies ranging from 100 MHz.
SRF3216-222Y
Bourns
Bourns SRF3216-222Y is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. Ideal for applications requiring high output impedance and low DC resistance in compact surface mount designs.
742792653
Wurth Elektronik 742792653 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.6xB0.8xH0.8 mm and output impedance of 600 OHM at frequencies ranging from 100 MHz to 200 MHz.
742792012
Wurth Elektronik 742792012 is a Ferrite Chip Data Line Filter with 2 terminals, operating b/w -55 to 125 °C. It has an output impedance of 33 OHM, DC resistance of 0.008 ohm, and rated current of 4 A. Ideal for surface mount applications in electronics for filtering frequencies from 100 MHz to 800 MHz.
MPZ2012S221A
TDK
The TDK MPZ2012S221A is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 125°C, offering a DC resistance of 0.04 ohm and output impedance of 220 ohm at 100 MHz. Ideal for data line filtering applications due to its compact size and high rated current of 3 A.
NFM21PC105B1C3D
Murata Manufacturing's NFM21PC105B1C3D is a data line filter with 500 Mohm min insulation resistance, 16V rated voltage, and 1000000 uF capacitance. It is used for feed-through capacitor applications in various electronic devices due to its compact dimensions and surface mounting type.
NFL21SP206X1C7D
Murata Manufacturing's NFL21SP206X1C7D is a 3-terminal data line filter with 1000 Mohm insulation resistance and 16V rated voltage. With inductance of 0.7uH, it operates b/w -55 to 125 °C, ideal for surface mount applications requiring capacitance of 240uF.
742792609
Wurth Elektronik 742792609 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It has a max operating temperature of 125°C and min frequency of 100 MHz. With dimensions of L1.6xB0.8xH0.8 mm, it offers low DC resistance at 0.04 ohm and output impedance of 30 OHM for effective noise filtering in surface mount installations.
ACM2012-900-2P
TDK's ACM2012-900-2P is a 2-function data line filter with 4 terminals, rated voltage of 50V, and max operating temp of 85°C. Ideal for surface mount applications, it offers 0.19 ohm DC resistance, 0.4A rated current, and output impedance of 90 ohm.
FLT007A0Z
Ge Industrial Solutions
DATA LINE FILTER MODULE; Maximum DC Resistance: .025 ohm; Rated Current: 7 A; Height: 12.19 mm; Approvals (V): UL; CSA; VDE; EN; Dimensions: L25.4XB25.4XH12.19 (mm)/L1.0XB1.0XH0.48 (inch);
BLM18KG601SN1J
Murata Manufacturing's BLM18KG601SN1J is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max DC resistance of 0.15 ohm and output impedance of 600 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications requiring effective filtering in compact spaces.
BLM18KG221SN1D
Murata Manufacturing's BLM18KG221SN1D is a chip bead data line filter with 2 terminals, rated for 2.2A current and 220 ohm output impedance. It operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.6xB0.8xH0.8 mm.
742792116
Wuerth Elektronik & Kg 742792116 is a FERRITE CHIP filter with 2 terminals, rated for 2.5A current and output impedance of 500 ohm. Ideal for data line filtering applications, it operates b/w -55 to 125 °C, with dimensions L3.2xB1.6xH1.1 mm and surface mounting type.
MMZ1608Y152BTD25
TDK's MMZ1608Y152BTD25 is a chip bead data line filter with 2 terminals. It offers a max operating temperature of 125°C and min of -55°C. With an output impedance of 1500 ohms, it is ideal for surface mount applications in automotive electronics.
ACM7060-701-2PL-TL
ACM7060-701-2PL-TL by TDK is a Data Line Filter with 2 functions, rated voltage of 80V, and max operating temp of 85°C. It has 4 terminals, insulation resistance of 10 Mohm, and DC resistance of 0.015 ohm. Ideal for applications requiring noise suppression in data lines.
FBMH3225HM601NT8
Taiyo Yuden
Taiyo Yuden's FBMH3225HM601NT8 is a Ferrite Chip Data Line Filter with 2 terminals, 600 Ohm output impedance, and 3A rated current. It operates b/w -40°C to 125°C, measures 3.2mm in length, and is ideal for surface mount applications requiring noise suppression in electronic circuits.
744272251
Wurth Elektronik 744272251 is a UL-approved data line filter with 2 functions, rated at 80V and 2A. With inductance of 250uH, it operates b/w -40°C to 125°C. Ideal for applications requiring surface mount filters with dimensions of L10.0xB8.7xH6.5mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BLM21PG221SN1D
Murata Manufacturing's BLM21PG221SN1D is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a width of 1.25mm and length of 2mm, it offers a max frequency of 100MHz and DC resistance of 0.05 ohm. Ideal for data line filtering applications due to its ferrite material and output impedance of 220 ohm.
BLM21PG300SN1D
BLM21PG300SN1D by Murata is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a DC resistance of 0.014 ohm, it offers output impedance of 30Ω at 100MHz. Ideal for data line filtering applications due to its compact size and high rated current of 2.3A.
BLM21PG331SN1D
BLM21PG331SN1D by Murata is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a DC resistance of 0.07 ohm and output impedance of 330 ohm, it's ideal for data line filtering applications at frequencies ranging from 100 MHz.
BLM21PG600SN1D
Murata Manufacturing's BLM21PG600SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55°C to 125°C. With a width of 1.25mm and length of 2mm, it offers a max DC resistance of 0.025 ohm and output impedance of 60 ohm at frequencies ranging from 100 MHz. Ideal for data line filtering applications, this surface mount component has a rated current of 3A and uses ferrite material for effective noise suppression.
BLM21AG121SN1D
Murata Manufacturing's BLM21AG121SN1D is an 0805 chip bead filter with 2 terminals. It operates b/w -55°C to 125°C, offering a max DC resistance of 0.09 ohm and output impedance of 120 ohm at frequencies ranging from 100 MHz. Ideal for data line filtering applications due to its compact size and surface mounting type.
BLM21AG601SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .21 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .6 A;
BLM21PG220SN1D
BLM21PG220SN1D by Murata is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 125 °C and has a DC resistance of 0.01 ohm. With dimensions of L2.0XB1.25XH0.85 (mm), it's ideal for data line filtering applications at frequencies ranging from 100 MHz, offering an output impedance of 22 OHM and a rated current of 6 A.
BLM21PG121SN1D
Murata Manufacturing's BLM21PG121SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. With a DC resistance of 0.03 ohm and output impedance of 120 OHM, it's ideal for data line filtering applications at frequencies ranging from 100 MHz.
BLM21PG221SN1B
BLM21PG221SN1B by Murata is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a width of 1.25mm and length of 2mm, it offers a max frequency of 100MHz and DC resistance of 0.05 ohm. Ideal for data line filtering applications due to its ferrite chip construction and output impedance of 220 ohm at rated current of 2A.
BLM21AH102SN1D
Murata Manufacturing's BLM21AH102SN1D is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 85°C, offering a DC resistance of 0.45 ohm and output impedance of 1000 ohm at 100 MHz. Ideal for data line filtering applications due to its compact size and high impedance characteristics.
BLM21PG221SN1J
Murata Manufacturing's BLM21PG221SN1J is an 0805 chip bead filter with 2 terminals, operating from -55 to 125 °C. With a width of 1.25mm and length of 2mm, it offers an output impedance of 220 ohm for data line filtering applications at frequencies ranging from 100 MHz.
BLM21PG221SH1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .045 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1.25 A;
BLM21PG221SN1
Murata Manufacturing's BLM21PG221SN1 is a FERRITE CHIP filter with 2 terminals, rated for 2A current. With dimensions of L2.0XB1.25XH0.85 (mm), it offers an output impedance of 220 ohm and max DC resistance of 0.05 ohm. Ideal for data line filtering applications, it operates b/w -55 to 125 °C in surface mount configurations.
BLM21RK102SN1D
Murata Manufacturing's BLM21RK102SN1D is an 0805 chip bead filter with 2 terminals. It operates b/w -55°C to 125°C, has a DC resistance of 0.5 ohm, and output impedance of 1000 ohm at 100 MHz. Ideal for data line filtering applications due to its ferrite material and surface mounting type.
BLM21PG331SN1B
Murata Manufacturing's BLM21PG331SN1B is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.07 ohm, output impedance of 330 OHM, and rated current of 1 A. Ideal for data line filtering applications due to its ferrite construction and surface mounting type.
BLM21AG471SN1D
BLM21AG471SN1D by Murata Manufacturing is a chip bead data line filter with 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L2.0XB1.25XH0.85 (mm) and is commonly used for surface mount applications in electronic devices.
BLM21PG331SN1J
BLM21PG331SN1J by Murata Manufacturing is a chip bead data line filter with 2 terminals and an 0805 case code. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L2.0XB1.25XH0.85 (mm) and is commonly used for surface mount applications to provide impedance of 330 OHM at a rated current of 1 A.
BLM21BD222TN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .6 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .2 A;
BLM21BB121SN1D
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .19 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .6 A;
BLM21AG102SH1J
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .45 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .2 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved