Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Taiyo Yuden's BK2125HS470-TV is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With dimensions of L2.0xB1.25xH0.85 (mm), it offers 47 OHM output impedance and operates b/w -55 to 125 °C. Ideal for data line filtering in surface mount applications.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
VNN
Nova Conductors
Ampacity Inc.
$0.400
Aztec Data Supply Inc.
$0.750
AZTECH Wire
$0.780
$0.730
$0.720
Corohmni
$1.354
Semicontronic
$2.400
$2.340
$2.328
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Advanced Electronics
Having only 2 terminals simplifies installation and reduces complexity.
Ferrite chip filters provide effective noise suppression for improved performance.
With a high maximum temperature, this filter can withstand demanding environments.
Able to function in extremely low temperatures, making it versatile.
The compact width allows for easy integration into tight spaces.
Low DC resistance ensures efficient power transfer and minimal voltage drop.
The short length saves space and contributes to a streamlined design.
A suitable output impedance for effective noise filtering in various applications.
Tape packaging ensures convenient storage and handling for large quantities.
Surface mount capability simplifies installation and facilitates automated assembly processes.
Compact dimensions make this filter versatile and suitable for diverse applications.
With a high rated current, this filter can handle demanding loads without issues.
The low height allows for a slim profile and easy integration into electronic devices.
Data Line Filters BK2125HS470-TV attributes and parameters. Explore more Data Line Filters devices from Taiyo Yuden
Maximum DC Resistance:
Filter Type:
Height:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Width (mm):
BK2125HS470-TV Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - MLC Inductor EOL 28/Aug/2015
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
2N2222A
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
Tesla Elektronicke Soucastky
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
C0603X104K5RACAUTO
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
Lite-on Semiconductor
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Goodwork Semiconductor
Bytesonic Electronics
SS14
Jinan Jingheng Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
Gec Plessey Semiconductors
Crimson Semiconductor
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
DLW5BTN102SQ2L
Murata Manufacturing
Murata's DLW5BTN102SQ2L is a Data Line Filter with 10 Mohm Insulation Resistance, 50V Rated Voltage, and 2A Rated Current. It has 4 terminals, operates b/w -40 to 85 °C, and offers an output impedance of 1000 ohm. Ideal for applications requiring noise suppression in data lines.
BLM21PG331SN1B
Murata Manufacturing's BLM21PG331SN1B is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.07 ohm, output impedance of 330 OHM, and rated current of 1 A. Ideal for data line filtering applications due to its ferrite construction and surface mounting type.
BLM18BA100SN1D
Murata Manufacturing's BLM18BA100SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 100MHz and DC resistance of 0.25 ohm. Ideal for surface mount applications, it provides an output impedance of 10 ohm and rated current of 0.5A in filtering data lines at frequencies above 100MHz.
500X18W104MV4E
Johanson Dielectrics
Johanson Dielectrics' 500X18W104MV4E is a 50V feed through capacitor with matte tin finish. It has a capacitance of 100000uF and dimensions of L2.150xB1.6xH1.27mm, suitable for data line filters applications.
ACM2012-900-2P-TL
TDK
The TDK ACM2012-900-2P-TL is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 85°C. It has 4 terminals, DC resistance of 0.19 ohm, and output impedance of 90 ohm. Ideal for surface mount applications in electronics to filter data lines efficiently.
MMZ2012R601AT
MMZ2012R601AT by TDK is an 0805 chip bead data line filter with a max operating temperature of 125°C and min of -55°C. It has a DC resistance of 0.2 ohm, output impedance of 600 OHM, and rated current of 0.5 A. Ideal for surface mount applications in electronics to suppress electromagnetic interference.
742792062
Wuerth Elektronik & Kg
Wurth Elektronik 742792062 is an 0805 multi-layer ferrite chip data line filter with dimensions of L2.0xB1.2xH0.9 (mm). It has a max operating temperature of 125°C and min frequency of 100 MHz, suitable for surface mount applications in electronic circuits requiring noise suppression up to 400 MHz.
SRF2012A-900YA
Bourns
Bourns SRF2012A-900YA is a data line filter with 2 functions, rated at 50V. It offers a max operating temperature of 125°C and min insulation resistance of 10 Mohm. Ideal for applications requiring surface mount filters with dimensions of L2.0xB1.2xH1.2 (mm).
SZEMI2121MTTAG
SZEMI2121MTTAG by Onsemi is a Data Line Filter with 8 terminals, rated for 0.1A current. It operates b/w -40°C to 85°C and has matte tin finish. With dimensions of 2.2mm x 2.0mm x 0.8mm, it's ideal for applications requiring surface mount filters in electronic devices.
ILHB0805ER121V
Vishay Intertechnology's ILHB0805ER121V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.03 ohm, and output impedance of 120 OHM. Ideal for surface mount applications in electronics requiring noise suppression at frequencies up to 100 MHz.
744230900
Wurth Elektronik 744230900 is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 105°C. Ideal for surface mount applications, it has dimensions of L1.6xB0.85xH1.1 (mm) and output impedance of 90 ohm.
BLM18EG221TN1D
Murata Manufacturing's BLM18EG221TN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.5mm, it offers a DC resistance of 0.15 ohm and output impedance of 300 ohm for frequencies ranging from 100 MHz to 1000 MHz. Ideal for surface mount applications requiring a rated current of 1A in filtering electronic signals.
8108-RC
The Bourns 8108-RC Data Line Filter features 2 functions, 4 terminals, and inductance of 1000 uH. With UL approval, it operates b/w -55°C to 105°C. Ideal for applications requiring a max DC resistance of 0.01 ohm and rated current of 10 A.
ACM7060-701-2PL-TL
ACM7060-701-2PL-TL by TDK is a Data Line Filter with 2 functions, rated voltage of 80V, and max operating temp of 85°C. It has 4 terminals, insulation resistance of 10 Mohm, and DC resistance of 0.015 ohm. Ideal for applications requiring noise suppression in data lines.
BK1608HS601-TV
Taiyo Yuden
BK1608HS601-TV by Taiyo Yuden is a FERRITE CHIP Data Line Filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 (mm), it's ideal for applications requiring an output impedance of 600 ohm, rated current of 0.35A, and surface mounting type.
BLM15BB221SN1D
Murata Manufacturing's BLM15BB221SN1D is a chip bead data line filter with 2 terminals, rated current of 0.2A, and output impedance of 220 ohm. It operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.0xB0.5xH0.5 mm.
YFF31AH2A105MT0Y0N
YFF31AH2A105MT0Y0N by TDK is a data line filter with 100 V rated voltage, 4 A rated current, and 1000000 uF capacitance. It is ideal for automotive applications due to its AEC-Q200 screening level and compact dimensions of 1.6mm x 3.2mm x 1.3mm for surface mount installation.
MMZ2012R102ATD25
MMZ2012R102ATD25 by TDK is a chip bead data line filter with AEC-Q200 screening. It has a max operating temperature of 125°C and min of -55°C, ideal for automotive applications. With dimensions of L2.0xB1.25xH0.85 (mm), it offers a max DC resistance of 0.3 ohm and output impedance of 1000 ohm, suitable for surface mounting type.
BLM15EG121SN1D
Murata Manufacturing's BLM15EG121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a DC resistance of 0.095 ohm and output impedance of 120 ohm. Ideal for applications requiring filtering in the frequency range of 100-1000 MHz.
BLM15PX331SN1D
Murata Manufacturing's BLM15PX331SN1D is a FERRITE CHIP data line filter with dimensions of L1.0xB0.5xH0.5 (mm). It offers a max DC resistance of 0.15 ohm and an output impedance of 330 ohm, suitable for surface mount applications in electronics to suppress electromagnetic interference efficiently.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BK2125LM182-TV
BK2125LM182-TV by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated for 0.3A current. With dimensions of L2.0XB1.25XH1.25 (mm), it has an output impedance of 1800 OHM and max DC resistance of 0.45 ohm. Ideal for data line filtering applications due to its compact size and surface mounting type.
BK2125HS470-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .05 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1 A;
BK2125HM102-T
BK2125HM102-T by Taiyo Yuden is a chip bead data line filter with 400V rated voltage, -55 to 125°C operating temperature range, and 1000 ohm output impedance. Ideal for surface mount applications in electronic devices requiring noise suppression at frequencies up to 100MHz.
BK2125HM601-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .25 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .5 A;
BK2125LL121-TV
FERRITE CHIP; Maximum DC Resistance: .3 ohm; Rated Current: .4 A; No. of Terminals: 2; Maximum Operating Temperature: 125 Cel; Width (mm): 1.25;
BK2125HS102-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .4 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .3 A;
BK2125HS101-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .9 A;
BK2125LM182-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .45 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .3 A;
BK2125HS101-TV
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: .9 A; Maximum Operating Temperature: 125 Cel; Output Impedance (ohm): 100 OHM; No. of Terminals: 2;
BK2125HS601-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .3 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .5 A;
BK2125HS601-TV
FERRITE CHIP; Maximum DC Resistance: .3 ohm; Rated Current: .5 A; Length: 2 mm; Height: .85 mm; Maximum Operating Temperature: 125 Cel;
BK2125HM102-TV
FERRITE CHIP; Maximum DC Resistance: .35 ohm; Rated Current: .4 A; Packing Method: TAPE; Minimum Operating Temperature: -55 Cel; Length: 2 mm;
BK2125HS102-TV
FERRITE CHIP; Maximum DC Resistance: .4 ohm; Rated Current: .3 A; No. of Terminals: 2; No. of Functions: 1; Width (mm): 1.25;
BK2125HM471-T
BK2125HS121-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .8 A;
BK2125LM152-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .35 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .4 A;
BK2125HS241-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .2 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .6 A;
BK2125HS431-T
BK2125HS470
BK2125HS431-TV
FERRITE CHIP; Maximum DC Resistance: .25 ohm; Rated Current: .5 A; Length: 2 mm; Width (mm): 1.25; Mounting Type: SURFACE MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved