Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BK2125HM102-T by Taiyo Yuden is a chip bead data line filter with 400V rated voltage, -55 to 125°C operating temperature range, and 1000 ohm output impedance. Ideal for surface mount applications in electronic devices requiring noise suppression at frequencies up to 100MHz.
Median Price
$0.013
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Speed Components Ltd
Bristol Electronics
Chip Stock
VNN
Corohmni
$0.011
Continental Prestige Electronics
Argo Parts USA
$0.012
Advanced Electronics
$0.015
$0.014
Aztec Data Supply Inc.
$1.130
Ampacity Inc.
$2.400
Semicontronic
$2.340
$2.328
AZTECH Wire
$7.114
Perfect Parts
Authorized Procurement Solutions
Glotronic Ltd.
GreenTree Electronics
Netroflash
Speed Components Ltd (Excess)
Robosynatics
Lucentia Tech
$0.698
$0.646
Chip Bead - This construction provides durability and reliability.
400 V - Suitable for use in various electronic devices.
2 - Easy to connect and integrate into circuits.
0805 - Standard size for compatibility with different applications.
FERRITE CHIP - Effective in reducing electromagnetic interference.
125 °C - Ensures stable performance in high-temperature environments.
55 °C - Can function in low-temperature conditions as well.
Matte Tin (Sn) - with Nickel (Ni) barrier - Provides corrosion resistance for longevity.
1.25 - Compact size for space-saving installation.
100 MHz - Filters out unwanted frequencies effectively.
0.35 ohm - Ensures efficient flow of current.
2 mm - Fits well in tight spaces.
100 MHz - Filters out high-frequency interference.
1000 OHM - Maintains signal integrity.
TAPE AND REEL - Convenient packaging for easy handling.
SURFACE MOUNT - Simple and secure installation.
L2.0XB1.25XH0.85 (mm)/L0.079XB0.049XH0.033 (inch) - Versatile size for various applications.
0.4 A - Suitable for low to moderate power applications.
0.85 mm - Low profile for compact designs.
Ferrite - Offers superior noise suppression and filtering capabilities.
Data Line Filters BK2125HM102-T attributes and parameters. Explore more Data Line Filters devices from Taiyo Yuden
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Sub-Category:
Terminal Finish:
Width (mm):
BK2125HM102-T Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - Mult Series 25/Feb/2021
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Bytesonic Electronics
ROHM
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
Microchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BLM18BA220SN1D
Murata Manufacturing
Murata's BLM18BA220SN1D is a chip bead data line filter with 2 terminals, rated for 0.5A current and 22 ohm output impedance. It operates b/w -55°C to 125°C, ideal for surface mount applications in filtering frequencies from 100 MHz with dimensions of 1.6x0.8x0.8mm.
BL02RN2R1M2B
Murata Manufacturing's BL02RN2R1M2B is a Ferrite Bead Data Line Filter with 7A rated current, -40 to 85°C operating temp range, and Through Hole Mount. Ideal for noise suppression in electronic circuits.
ACT1210L-101-2P-TL00
TDK
TDK's ACT1210L-101-2P-TL00 is a Data Line Filter with 10 Mohm Min Insulation Resistance, 80V Rated Voltage, and 100uH Inductance. Ideal for applications requiring noise suppression in data lines while operating within -40 to 125 °C temperature range.
MPZ2012S102JTD25
The TDK MPZ2012S102JTD25 is a FERRITE CHIP data line filter with 2 terminals, AEC-Q200 screening. It has a max operating temp of 125°C, min of -55°C, and DC resistance of 0.15 ohm. Ideal for automotive applications due to its high output impedance of 1000 OHM and rated current of 1.5 A.
FLTR100V10Z
Abb
FLTR100V10Z by Abb is a 10A data line filter module with CSA approval. It operates at -40 to 100°C, has 5 terminals, and a max DC resistance of 0.014 ohm. Ideal for applications requiring noise suppression in data lines.
MPZ1608S101ATDH5
TDK's MPZ1608S101ATDH5 is a FERRITE CHIP filter with 2 terminals, rated for 3A current. It offers a max DC resistance of 0.03 ohm and an output impedance of 100 OHM. Ideal for data line filtering applications, it operates b/w -55 to 125 °C temperatures in surface mount installations.
DLW43SH510XK2L
Murata Manufacturing DLW43SH510XK2L is a FERRITE CHIP data line filter with 51uH inductance, 10 Mohm insulation resistance, and AEC-Q200 screening. It has 4 terminals, rated for 50V voltage and 0.23A current. Ideal for automotive applications due to its compact size (L4.5xB3.2xH2.6 mm) and surface mounting type.
DLW31SN261SQ2L
Murata Manufacturing's DLW31SN261SQ2L is a data line filter with 2 functions, rated at 50V and 0.31A. It offers a max DC resistance of 0.5 ohm and an output impedance of 260 ohm. This surface mount filter operates b/w -40°C to 85°C, making it ideal for various electronic applications requiring noise suppression in data lines.
MPZ1608S121ATAH0
The TDK MPZ1608S121ATAH0 is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 120 ohms and rated current of 2A, suitable for surface mount applications in various electronic devices.
FBMH2012HM221-T
Taiyo Yuden
Taiyo Yuden's FBMH2012HM221-T is an 0805 chip bead filter with 2 terminals. With a max operating temp of 85°C, it offers a DC resistance of 0.06 ohm and output impedance of 220 ohm. Ideal for data line filtering applications, this ferrite chip measures L2.0xB1.25xH0.85 mm and supports up to 100 MHz frequency range.
742792603
Wuerth Elektronik & Kg
Wurth Elektronik 742792603 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with a frequency range of 100-1000 MHz and DC resistance of 0.03 ohm. This surface mount component has dimensions of L1.6xB0.8xH0.8 mm and rated current of 4A, ideal for noise suppression in electronic circuits.
2773021447
Fair-rite Products
Fair-rite Products' 2773021447 is a FERRITE BEAD filter with 2 terminals, matte tin finish, and 70 OHM impedance. Ideal for data line filtering in surface mount applications due to its compact dimensions of L9.6XB3.05XH2.85 mm.
4400-099LF
Tusonix
FEED THROUGH CAPACITOR; Rated Current: 10 A; Capacitance: 50000 uF; Rated Voltage: 50 V; Terminal Finish: Silver (Ag); Maximum Insertion Loss: 70 dB;
EMI4192MTTAG
EMI4192MTTAG by Onsemi is a Data Line Filter with 2 functions and 10 terminals. It has a max operating temperature of 85°C, DC resistance of 5 ohm, and output impedance of 50 ohm. Ideal for applications requiring surface mount filters with a capacitance of 1.3 uF in plastic/epoxy packages.
PA3747.305NL
Pulse Electronics
PA3747.305NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 1920 uH inductance. It operates b/w -40 to 125 °C and has a max DC resistance of 0.0495 ohm. Ideal for applications requiring a through-hole mount filter with a rated current of 2.75 A and an output impedance of 5080 OHM.
BKP1608HS101-T
BKP1608HS101-T by Taiyo Yuden is a multilayer chip data line filter with 2 terminals. It has a max operating temperature of 85°C and a min operating temperature of -55°C. This ferrite chip filter has a width of 0.8mm, length of 1.6mm, and height of 0.8mm. It is commonly used for noise suppression in electronic devices such as smartphones and tablets.
SRF0905-251Y
Bourns
Bourns SRF0905-251Y is a data line filter with 2 functions, rated voltage of 50V, and inductance of 250uH. It operates b/w -40°C to 105°C, has a max DC resistance of 0.13 ohm, and output impedance of 600 ohm. Ideal for applications requiring surface mount filters with dimensions L9.2xB6.0xH5.0mm such as data communication systems.
BLM15PX331SN1D
Murata Manufacturing's BLM15PX331SN1D is a FERRITE CHIP data line filter with dimensions of L1.0xB0.5xH0.5 (mm). It offers a max DC resistance of 0.15 ohm and an output impedance of 330 ohm, suitable for surface mount applications in electronics to suppress electromagnetic interference efficiently.
DLW43SH101XK2B
Murata Manufacturing's DLW43SH101XK2B is a FERRITE CHIP filter with 100uH inductance, 10 Mohm insulation resistance, and 2 ohm max DC resistance. It has 4 terminals, rated for 0.2A current at 50V. Ideal for automotive applications due to AEC-Q200 screening level.
ACT45B-101-2P-TL003
TDK's ACT45B-101-2P-TL003 is a FERRITE CHIP filter with 100uH inductance, 1.5ohm DC resistance, and 50V rated voltage. Ideal for data line filtering applications due to its compact dimensions of L4.5xB3.2xH2.8mm and surface mounting type capability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BK2125LM182-TV
BK2125LM182-TV by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated for 0.3A current. With dimensions of L2.0XB1.25XH1.25 (mm), it has an output impedance of 1800 OHM and max DC resistance of 0.45 ohm. Ideal for data line filtering applications due to its compact size and surface mounting type.
BK2125HS470-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .05 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1 A;
BK2125HS470-TV
Taiyo Yuden's BK2125HS470-TV is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With dimensions of L2.0xB1.25xH0.85 (mm), it offers 47 OHM output impedance and operates b/w -55 to 125 °C. Ideal for data line filtering in surface mount applications.
BK2125HM601-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .25 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .5 A;
BK2125LL121-TV
FERRITE CHIP; Maximum DC Resistance: .3 ohm; Rated Current: .4 A; No. of Terminals: 2; Maximum Operating Temperature: 125 Cel; Width (mm): 1.25;
BK2125HS102-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .4 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .3 A;
BK2125HS101-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .9 A;
BK2125LM182-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .45 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .3 A;
BK2125HS101-TV
FERRITE CHIP; Maximum DC Resistance: .1 ohm; Rated Current: .9 A; Maximum Operating Temperature: 125 Cel; Output Impedance (ohm): 100 OHM; No. of Terminals: 2;
BK2125HS601-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .3 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .5 A;
BK2125HS601-TV
FERRITE CHIP; Maximum DC Resistance: .3 ohm; Rated Current: .5 A; Length: 2 mm; Height: .85 mm; Maximum Operating Temperature: 125 Cel;
BK2125HM102-TV
FERRITE CHIP; Maximum DC Resistance: .35 ohm; Rated Current: .4 A; Packing Method: TAPE; Minimum Operating Temperature: -55 Cel; Length: 2 mm;
BK2125HS102-TV
FERRITE CHIP; Maximum DC Resistance: .4 ohm; Rated Current: .3 A; No. of Terminals: 2; No. of Functions: 1; Width (mm): 1.25;
BK2125HM471-T
BK2125HS121-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .8 A;
BK2125LM152-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .35 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .4 A;
BK2125HM121-T
BK2125HM241-T
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .2 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .6 A;
BK2125HM102
BK2125HS750
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved