Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata's BLM18BB100SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 100MHz and DC resistance of 0.1 ohm. Ideal for surface mount applications, it provides an output impedance of 10Ω, making it suitable for noise suppression in electronic circuits.
Median Price
$0.038
Lifecycle Status
Suppliers In-Stock
32
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.100
100+ parts
$0.042
1k+ parts
$0.029
10k+ parts
$0.019
DigiKey
$0.043
$0.020
Arrow
-
$0.010
Verical
TTI
$0.018
TTI Europe
$0.016
RS (Exports)
$0.065
$0.048
$0.039
Chip1Stop
$0.035
$0.013
Newark
$0.025
Farnell
$0.041
$0.028
$0.021
Element14
$0.024
Nova Conductors
TME
$0.150
IBS Electronics
$0.014
NAC Semi
Vyrian
Rutronik
$0.017
ComSIT Distribution GmbH
Speed Components Ltd
SPM Sales
Legend Electronics Inc.
ACDS - Activité Composants Distribution Service
Ashlea Components Ltd
Dan-Mar Components
LWI Electronics Inc
Semtec, LLC
Bristol Electronics
PC Components Company LLC
Prism Electronics
VNN
Bisco
Martec Srl
Semicontronic
Aranea Global
$0.027
Argo Parts USA
Aztec Data Supply Inc.
$0.780
Corohmni
$3.440
Eastek
GreenTree Electronics
Perfect Parts
Authorized Procurement Solutions
S.R.D Solutions
Continental Prestige Electronics
Kepictronics
The use of a chip bead construction provides high efficiency in filtering electromagnetic interference, making this product ideal for noise suppression in data lines.
With two terminals, this filter can easily be connected in series with the data line for effective filtering without compromising the signal integrity.
The compact 0603 case code allows for easy integration into circuit boards with limited space, making it suitable for small electronic devices.
The ferrite chip filter type offers excellent noise suppression capabilities across a wide frequency range, making it a reliable choice for maintaining signal quality.
With a high maximum operating temperature, this filter can withstand harsh environmental conditions, ensuring long-term reliability.
The wide temperature range allows for versatile use in both low and high-temperature environments, enhancing the filter's durability.
The terminal finish of tin provides good solderability and conductivity, ensuring a secure and reliable connection in the circuit.
The slim 0.8mm width makes this filter suitable for applications where space is limited, allowing for easy installation in compact electronic devices.
With a minimum frequency of 100 MHz, this filter effectively attenuates noise and interference in high-speed data transmission, ensuring signal integrity.
The low DC resistance of 0.1 ohm minimizes power loss and voltage drop across the filter, enhancing the efficiency of the data line.
The 1.6mm length of this filter allows for seamless integration into PCB layouts, enabling efficient noise filtering without disrupting the circuit design.
The high maximum frequency rating of 100 MHz ensures reliable noise suppression in a wide range of data transmission applications.
The output impedance of 10 ohms helps in matching the impedance of the filter with the data line, optimizing signal transfer and reducing reflections.
The tape packing method provides convenience in handling and storage, making it easier to manage and install multiple filters in production.
The surface mounting type simplifies the installation process, allowing for quick and secure attachment to the PCB without additional hardware.
The compact dimensions of 1.6mm length, 0.8mm width, and 0.8mm height make this filter suitable for space-constrained applications while ensuring effective noise filtering.
With a rated current of 0.7 A, this filter can handle high current loads in data lines, providing reliable protection against electromagnetic interference.
The low height of 0.8mm allows for a slim profile, making this filter ideal for applications where space-saving is essential.
Constructed with ferrite material, this filter offers high magnetic permeability and low electrical conductivity, making it an excellent choice for filtering out electromagnetic interference.
Data Line Filters BLM18BB100SN1D attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Additional Features:
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
BLM18BB100SN1D Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Assembly/Origin - Assembly Site Add 7/Mar/2014
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2003ADR
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Hitano Enterprise
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
B82789C0513N002
TDK
The TDK B82789C0513N002 is a data line filter with 2 functions, rated voltage of 80V, and inductance of 51uH. It operates b/w -55°C to 125°C and has a max DC resistance of 0.55 ohm. Ideal for applications requiring noise suppression in electronic circuits.
744823220
Wuerth Elektronik & Kg
Wurth Elektronik 744823220 is a UL-approved data line filter with 2 functions, rated voltage of 250V, and inductance of 20000uH. It operates b/w -40 to 125 °C and has dimensions of L23.0xB13.0xH28.0 mm. Ideal for applications requiring noise suppression in data lines at a max current of 1.5A.
BLM21BD601SN1D
Murata Manufacturing
Murata's BLM21BD601SN1D is an 0805 chip bead filter with 2 terminals, ideal for data line filtering. With a max operating temp of 125°C and min of -55°C, it offers low DC resistance of 0.35 ohm at 100 MHz frequency. This ferrite chip has dimensions L2.0xB1.25xH0.85 mm and rated current of 0.2 A, suitable for surface mount applications in various electronic devices.
HR2220V801R-10
Laird Technologies
HR2220V801R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers an output impedance of 800 OHM, rated current of 8 A, and DC resistance of 0.01 ohm. Ideal for surface mount applications in filtering frequencies from 25 MHz to 1000 MHz.
7427927311
Wurth Elektronik 7427927311 is a FERRITE CHIP Data Line Filter with AEC-Q200 screening. It has 2 terminals, operates b/w -55 to 125 °C, and offers 0.09 ohm DC resistance. Ideal for surface mount applications, it measures L1.0xB0.5xH0.5 mm and handles a rated current of 1.2A while providing an output impedance of 120 OHM.
BLM15PX601SN1D
Murata Manufacturing's BLM15PX601SN1D is a FERRITE CHIP data line filter with 0.5mm width, 1mm length, and 0.5mm height. It has a max DC resistance of 0.23 ohm and an output impedance of 600 ohm, suitable for surface mount applications in electronics to manage interference on data lines.
MPZ2012S331AT000
The TDK MPZ2012S331AT000 is an 0805 chip bead data line filter with a max operating temperature of 125°C and min frequency of 100 MHz. With a DC resistance of 0.05 ohm, it is ideal for applications requiring noise suppression in electronic circuits. This surface mount filter has dimensions of L2.0xB1.25xH0.85 (mm) and is commonly used in telecommunications equipment.
SRF4532-101Y
Bourns
Bourns SRF4532-101Y is a Data Line Filter with 100uH inductance, 10 Mohm insulation resistance, and rated voltage of 50V. Ideal for applications requiring noise suppression in data lines, it operates b/w -40°C to 125°C and has a max DC resistance of 8.9 ohm.
BLM18BD471SN1D
BLM18BD471SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines.
NFM18PC225B1A3D
Murata Manufacturing's NFM18PC225B1A3D is a FEED THROUGH CAPACITOR with 200 Mohm Min Insulation Resistance, 10 V Rated Voltage, and 2200000 uF Capacitance. It operates b/w -40 to 85 °C and is ideal for data line filtering applications due to its compact size (L1.6XB0.8XH0.8 mm) and high rated current of 4 A.
BLM18PG471SN1B
Murata Manufacturing's BLM18PG471SN1B is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.2 ohm, output impedance of 470 OHM, and rated current of 1 A. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
BLM21PG331SN1D
BLM21PG331SN1D by Murata is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a DC resistance of 0.07 ohm and output impedance of 330 ohm, it's ideal for data line filtering applications at frequencies ranging from 100 MHz.
BLM41PG750SN1L
Murata Manufacturing's BLM41PG750SN1L is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max DC resistance of 0.025 ohm and output impedance of 75 OHM at frequencies ranging from 100 MHz. Ideal for surface mount applications requiring high-frequency filtering.
742792645
Wurth Elektronik 742792645 is a FERRITE CHIP Data Line Filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 (mm), it's ideal for surface mount applications in electronics to achieve an output impedance of 470 OHM at a rated current of 1 A.
ACH4518-102-TD01
TDK ACH4518-102-TD01 is a FERRITE CHIP filter with 25 dB attenuation at 150 MHz. It has 1000 Mohm insulation resistance, rated for 50 V and 2 A current. Ideal for data line filtering in surface mount applications due to its compact L4.5XB1.8XH3.2 mm dimensions and -25 to 85 °C operating temperature range.
FBMJ4516HS111-T
Taiyo Yuden
FBMJ4516HS111-T by Taiyo Yuden is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 85°C and a min frequency of 100 MHz. This filter is commonly used in applications requiring noise suppression in electronic circuits.
MI0603J601R-10
Laird Technologies' MI0603J601R-10 is a chip bead data line filter with 2 terminals, operating from -40 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.2 ohm and an output impedance of 600 ohm for frequencies ranging from 25MHz to 1000MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 1A and is commonly used in electronic devices requiring noise suppression on data lines.
ACM90V-701-2PL-TL00
TDK's ACM90V-701-2PL-TL00 is a Data Line Filter with 80V rated voltage, 10 Mohm insulation resistance, and 5A rated current. It has 2 functions, operates b/w -40 to 125 °C, and offers an output impedance of 700 ohm. Ideal for surface mount applications requiring effective data line filtering.
744273222
Wurth Elektronik 744273222 is a Data Line Filter with 2 functions, rated at 80V. It has an inductance of 30uH and operates b/w -40 to 125°C. Ideal for applications requiring noise suppression in data lines with UL and IEC approvals.
ACM2012-121-2P-T002
TDK's ACM2012-121-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 50V and 0.37A. With dimensions of L2.0xB1.2xH1.3 (mm), it offers high insulation resistance for data line filtering applications in electronics, ensuring reliable performance from -40 to 85 °C temperatures.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BLM18PG121SN1D
Murata's BLM18PG121SN1D is a chip bead data line filter with 2 terminals, rated for 2A current. It operates b/w -55°C to 125°C, offering 120 ohm impedance at 100MHz frequency. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.
BLM18AG102SN1D
Murata Manufacturing's BLM18AG102SN1D is a chip bead data line filter with 2 terminals, rated for 0.4A current. With dimensions of 1.6x0.8x0.8mm, it operates b/w -55°C to 125°C and offers an output impedance of 1000Ω at frequencies up to 100MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
BLM18PG471SN1D
BLM18PG471SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines.
BLM15AG121SN1D
Murata Manufacturing's BLM15AG121SN1D is a 0402 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. With a DC resistance of 0.19 ohm, it offers an output impedance of 120 OHM at a frequency range of 100 MHz. Ideal for data line filtering applications due to its compact size and surface mounting type.
BLM18HE152SN1D
BLM18HE152SN1D by Murata is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. It offers a DC resistance of 0.5 ohm, output impedance of 1500 ohm, and rated current of 0.4 A. Ideal for applications requiring surface mount filters in the frequency range of 100-1000 MHz.
BLM18AG601SN1D
Murata's BLM18AG601SN1D is a chip bead data line filter with 2 terminals, rated for 0.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.6xB0.8xH0.8 mm.
BLM18AG121SN1D
Murata Manufacturing's BLM18AG121SN1D is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and matte tin finish. It operates b/w -55°C to 125°C, has a DC resistance of 0.18 ohm, and output impedance of 120 OHM. Ideal for surface mount applications in filtering data lines up to 100 MHz frequency range.
BLM18EG221SN1D
Murata Manufacturing's BLM18EG221SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 1000 MHz and DC resistance of 0.05 ohm. Ideal for surface mount applications in filtering data lines with an output impedance of 260 ohm at frequencies ranging from 100 MHz to 1000 MHz.
BLM18PG600SN1D
Murata Manufacturing's BLM18PG600SN1D is a chip bead data line filter with 2 terminals, operating from -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.1 ohm and output impedance of 60 ohm at frequencies up to 100 MHz. Ideal for surface mount applications, this ferrite chip filter is designed to handle up to 0.5A rated current in various electronic circuits.
BLM18PG300SN1D
BLM18PG300SN1D by Murata is a chip bead data line filter with 2 terminals, rated current of 1A, and output impedance of 30 ohm. It operates b/w -55 to 125 °C and has dimensions of L1.6xB0.8xH0.8 mm. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
BLM15AG100SN1D
Murata BLM15AG100SN1D is a chip bead data line filter with 2 terminals, rated for 1A current. It offers a DC resistance of 0.025 ohm and output impedance of 10 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications in electronics to suppress noise and interference.
BLM18SG121TN1D
Murata Manufacturing's BLM18SG121TN1D is a chip bead data line filter with 2 terminals, rated for 3A current. It operates b/w -55°C to 125°C, offering 120 ohm output impedance at 100MHz frequency. Ideal for surface mount applications requiring effective filtering in compact spaces.
BLM15AG221SN1D
Murata's BLM15AG221SN1D is a 0402 chip bead filter with 220 ohm output impedance, 0.29 ohm DC resistance, and 0.45 A rated current. It operates b/w -55 to 125 °C and is ideal for data line filtering applications due to its ferrite construction and surface mounting type.
BLM18PG181SN1D
Murata Manufacturing's BLM18PG181SN1D is a chip bead data line filter with 2 terminals, rated for 1.5A current and 180 ohm output impedance. It operates b/w -55°C to 125°C, ideal for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.6xB0.8xH0.8 mm.
BLM15AG601SN1D
Murata Manufacturing's BLM15AG601SN1D is a 0402 chip bead filter with 2 terminals. It operates b/w -55 to 125°C, has a DC resistance of 0.52 ohm, and output impedance of 600 ohm. Ideal for data line filtering applications due to its compact size (L1.0xB0.5xH0.5 mm) and rated current of 0.3 A.
BLM18EG601SN1D
Murata's BLM18EG601SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.35 ohm, output impedance of 700 OHM, and rated current of 0.5 A. Ideal for surface mount applications in filtering frequencies from 100 MHz to 1000 MHz.
BLM18KG601SN1D
Murata Manufacturing's BLM18KG601SN1D is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and 0.8mm width. Operating b/w -55 to 125 °C, it has a DC resistance of 0.15 ohm and output impedance of 600 OHM. Ideal for surface mount applications in electronics for noise suppression at frequencies ranging from 100 MHz.
BLM15AG102SN1D
Murata Manufacturing's BLM15AG102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L1.0XB0.5XH0.5 (mm), it offers a max frequency of 100 MHz and DC resistance of 0.65 ohm, suitable for surface mount applications in electronics for impedance matching and noise suppression.
BLM18HE102SN1D
BLM18HE102SN1D by Murata is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 1000 MHz and DC resistance of 0.35 ohm. Ideal for surface mount applications in electronics requiring impedance matching up to 1000 OHM at frequencies ranging from 100 MHz to 1000 MHz.
BLM15HG102SN1D
Murata Manufacturing's BLM15HG102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a DC resistance of 1.1 ohm and an output impedance of 1000 ohm for frequencies ranging from 100MHz to 1000MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved