Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TDK B82787C0513H002 is a 2-function data line filter with 51uH inductance and 10 Mohm insulation resistance. Rated for 50V, it operates b/w -40 to 150°C, ideal for applications requiring noise suppression in data lines.
Median Price
$0.730
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.030
100+ parts
$0.695
1k+ parts
$0.573
10k+ parts
$0.468
DigiKey
$0.572
-
Verical
$0.466
Chip1Stop
$0.287
Arrow
$0.469
Element14
$1.590
$1.150
$1.090
Farnell
$0.549
$0.439
$0.374
Avnet
$0.247
Distrelec
Bürklin Elektronik
$0.910
$0.790
$0.570
RS (Exports)
$0.928
$0.890
Nova Conductors
$0.694
TME
$0.930
$0.624
$0.520
Maritex
$1.845
$0.437
Chip Stock
Rutronik
$0.527
Vyrian
Cyclops Electronics Ltd
VNN
Semicontronic
$0.244
$0.238
$0.237
Ampacity Inc.
$0.530
Continental Prestige Electronics
$0.681
$0.667
Argo Parts USA
$0.660
Aztec Data Supply Inc.
$1.490
Corohmni
$2.009
Authorized Procurement Solutions
Computer Components Inc. - USA
Kepictronics
Futuretech Components
High insulation resistance helps in reducing the risk of electrical leakage and ensuring safety in data line applications.
IEC approval ensures that the product meets international quality standards and regulations for electrical components.
Having two functions in one data line filter provides better filtering capabilities and improved performance for signal quality.
Suitable for applications requiring low voltage filtering, making it compatible with a wide range of electronic devices.
Having four terminals allows for easy and secure connection, ensuring stable performance in data transmission.
Specifically designed as a data line filter, ensuring effective noise suppression and interference reduction in data communication.
Withstanding high temperatures ensures reliability and stability in various operating environments.
Capable of functioning in extreme cold conditions, making it suitable for a wide range of temperature environments.
Tin over nickel finish provides corrosion resistance and ensures durable connections for long-term usage.
Optimal inductance value for effective filtering and noise suppression, improving overall signal quality.
Compact width allows for easy installation in space-constrained applications, saving valuable board space.
Low DC resistance helps in minimizing power loss and maintaining signal integrity in data transmission.
Compact length makes it suitable for various electronic devices and applications, ensuring versatility in usage.
High output impedance provides effective filtering and noise suppression, enhancing signal quality in data communication.
Secure packing method ensures safe transportation and storage, protecting the product from damage.
Surface mount design allows for easy and efficient installation on circuit boards, saving time and effort in assembly.
Compact dimensions make it suitable for compact electronic devices and applications, providing flexibility in design.
Suitable current rating for data line applications, ensuring safe and reliable operation under specified load conditions.
Low profile height allows for easy integration in slim devices, saving space and reducing overall product size.
Data Line Filters B82787C0513H002 attributes and parameters. Explore more Data Line Filters devices from TDK
Additional Features:
Approvals (V):
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
B82787C0513H002 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Packaging - Multiple Devices Outer Pack 30/Sep/2016
TDK was founded as a venture enterprise in 1935 for the purpose of industrializing a magnetic material called ferrite, which was invented at the Tokyo Institute of Technology. TDK's corporate motto is "Contribute to culture and industry through creativity," a message that embodies the company's founding spirit. Guided by this spirit, in the ensuing year TDK has sought to refine its materials and process technologies, as it develops new products that satisfy market needs. Concurrently, TDK advances globalization and diversification of its business operation while actively pursuing M&As, collaboration with external partners and other initiatives. As a result, TDK today is engaged in four main businesses: Passive Components, Sensor Application Products, Magnetic Application Products, and Energy Application Products. Looking ahead, TDK would like to remain a dynamic company that continues to deliver even higher value to all stakeholders, including shareholders, customers, suppliers, employees and local communities, by bringing together the entire Group's strengths while taking full advantage of the strengths of each Group company, and constantly drawing on innovative thinking and a willingness to tackle new challenges.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Goodwork Semiconductor
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
LM107H/883C
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
LM107H/883
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
MBRS130LT3G
Onsemi
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
MMZ1608R601ATD25
TDK MMZ1608R601ATD25 is a chip bead data line filter with 2 terminals. It offers a max DC resistance of 0.4 ohm and an output impedance of 600 ohm. AEC-Q200 screening makes it suitable for automotive applications, ensuring reliable performance in extreme temperatures from -55°C to 125°C.
ACT1210-101-2P-TL00
TDK's ACT1210-101-2P-TL00 is a data line filter with 10 Mohm insulation resistance, 80V rated voltage, and 100uH inductance. It has 2 functions and operates b/w -40 to 150 °C, making it ideal for automotive applications meeting AEC-Q200 standards.
DSS1NB32A103Q55B
Murata Manufacturing
Murata's DSS1NB32A103Q55B is a 100V data line filter with 6A rated current. It operates b/w -40°C to 85°C, measuring L8.5xB3.5xH7.5mm and used for filtering data lines in various electronic applications.
FBMH4532HM132-T
Taiyo Yuden
FBMH4532HM132-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, rated for 3A current. Featuring ferrite construction, it offers an output impedance of 1300Ω and operates b/w -40°C to 85°C. Ideal for surface mount applications, this filter measures L4.5xB3.2xH3.2mm and is designed for frequencies ranging from 100MHz with a max DC resistance of 0.06Ω.
FBMH3225HM601NT
Taiyo Yuden's FBMH3225HM601NT is a chip bead data line filter with 2 terminals. It operates b/w -40 to 85°C, offering 600 OHM impedance at 100 MHz. Ideal for surface mount applications, it measures L3.2xB2.5xH2.5 mm and has a max DC resistance of 0.042 ohm.
742792622
Wuerth Elektronik & Kg
Wurth Elektronik 742792622 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, has a DC resistance of 0.3 ohm, and an output impedance of 180 OHM. Dimensions are L1.6xB0.8xH0.8 mm, rated for 1.5 A current with surface mounting type.
ACP3225-102-2P-TL000
TDK's ACP3225-102-2P-TL000 is a 2-function data line filter with 60V rated voltage and 1.2A current. With dimensions of L3.2xB2.5xH1.9 mm, it operates b/w -25 to 85 °C, ideal for surface mount applications in various electronic devices.
ACM2012-121-2P-T002
TDK's ACM2012-121-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 50V and 0.37A. With dimensions of L2.0xB1.2xH1.3 (mm), it offers high insulation resistance for data line filtering applications in electronics, ensuring reliable performance from -40 to 85 °C temperatures.
MMZ1608Y601BTA00
TDK's MMZ1608Y601BTA00 is a 0603 chip bead data line filter with 2 terminals. Featuring ferrite chip construction, it has a max operating temp of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 mm, it offers an output impedance of 600 ohm and rated current of 0.5 A, ideal for surface mount applications in electronics.
BLM18BB100SN1D
Murata's BLM18BB100SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 100MHz and DC resistance of 0.1 ohm. Ideal for surface mount applications, it provides an output impedance of 10Ω, making it suitable for noise suppression in electronic circuits.
BLM18AG471SN1D
Murata Manufacturing's BLM18AG471SN1D is a chip bead data line filter with 470 OHM output impedance, 0.35 ohm DC resistance, and 100 MHz frequency range. Ideal for surface mount applications in electronics to suppress electromagnetic interference and noise on data lines.
NFM41PC155B1E3L
Murata Manufacturing's NFM41PC155B1E3L is a data line filter with 1500000uF capacitance, 25V rated voltage, and 6A rated current. It is a feed through capacitor used in applications requiring noise suppression and signal filtering in electronic circuits.
P0473NL
Pulse Electronics
Pulse Electronics P0473NL is a data line filter with 2 functions, AEC-Q200 screening level. It offers inductance of 880uH, max operating temp of 120°C, and rated current of 1.63A. Ideal for applications requiring surface mount filters with dimensions L12.7xB12.7xH5.46mm such as automotive electronics.
CM1422-03CP
CM1422-03CP by Onsemi is a data line filter with 8 functions and 20 terminals. It has a max operating temperature of 85°C and min of -40°C. With dimensions of L4.0XB1.46XH0.65 (mm), it is ideal for applications requiring high capacitance filtering in compact spaces.
ACM7060-301-2PL-TL
The TDK ACM7060-301-2PL-TL is a data line filter with 2 functions, rated at 80V and 5A. It offers a min insulation resistance of 10 Mohm and operates b/w -25°C to 85°C. Ideal for applications requiring noise suppression in data lines with its compact dimensions of L7.0xB6.0xH3.5 mm.
BLM18BB600SN1D
BLM18BB600SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines.
EXCCET103U
The Panasonic EXCCET103U is a data line filter with 25 dB attenuation at 15 MHz. It has a rated voltage of 50 V and can handle up to 2 A current. Ideal for surface mount applications, this compact filter measures L4.5xB1.8xH2.7 mm and operates b/w -40°C to 85°C temperatures.
ACM4520-421-2P-T000
ACM4520-421-2P-T000 by TDK is a data line filter with 2 functions, rated voltage of 50V, and max operating temp of 85°C. It has insulation resistance of 10 Mohm and DC resistance of 0.055 ohm. Ideal for applications requiring noise suppression in electronic circuits.
BLM18BD102SN1D
Murata Manufacturing's BLM18BD102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 100MHz and DC resistance of 0.85 ohm. Ideal for surface mount applications, this ferrite chip filter has an output impedance of 1000Ω and rated current of 0.1A.
MPZ2012S331ATD25
The TDK MPZ2012S331ATD25 is a FERRITE CHIP filter with 330 OHM output impedance and 2.5 A rated current. With AEC-Q200 screening, it's ideal for automotive applications requiring data line filtering. This surface mount device operates b/w -55 to 125 °C, making it suitable for harsh environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
B82790S0513N201
TDK B82790S0513N201 is a 2-function data line filter with 80V rated voltage and 51uH inductance. Operating b/w -40°C to 125°C, it has a max DC resistance of 0.14 ohm. Ideal for applications requiring noise suppression in data lines, it comes in surface mount packaging with dimensions of L7.1xB6.0xH4.9mm.
B82789C0513N002
The TDK B82789C0513N002 is a data line filter with 2 functions, rated voltage of 80V, and inductance of 51uH. It operates b/w -55°C to 125°C and has a max DC resistance of 0.55 ohm. Ideal for applications requiring noise suppression in electronic circuits.
B82789C0104N002
TDK B82789C0104N002 is a data line filter with 2 functions, rated voltage of 80V, and inductance of 100uH. It operates b/w -55°C to 125°C, has matte tin over nickel finish, and dimensions of L4.5xB3.2xH3.0mm. Ideal for applications requiring filtering in data lines with a max current rating of 0.15A.
B82790-S513-N201
TDK B82790-S513-N201 is a 2-function data line filter with 80V rated voltage and 51uH inductance. Ideal for applications requiring a compact surface-mount solution, it offers low DC resistance of 0.14 ohm and output impedance of 50 ohm.
B82790C0513N201
TDK B82790C0513N201 is a 2-function data line filter with 80V rated voltage and 51uH inductance. It has 4 terminals, matte tin over nickel finish, and 0.14 ohm max DC resistance. Ideal for applications requiring a compact surface mount filter with 50 ohm output impedance.
B82789C0513H002
TDK B82789C0513H002 is an 80V data line filter with 51uH inductance and 0.55 ohm max DC resistance. It has 2 functions, 4 terminals, and operates b/w -55 to 150°C. Ideal for applications requiring a compact surface mount filter with a rated current of 0.25A.
B82790C0113N201
DATA LINE FILTER; Maximum DC Resistance: .08 ohm; Rated Current: .5 A; Rated Voltage: 80 V; No. of Terminals: 4; Width (mm): 6.0;
B82790C0105N240
The TDK B82790C0105N240 is a data line filter with 2 functions, rated voltage of 80V, and inductance of 1000uH. It has UL and IEC approvals, suitable for applications requiring filtering of data lines. With dimensions of L7.1xB6.0xH4.9 (mm), it is designed for surface mount installation with a max DC resistance of 0.17 ohm and rated current of 0.5A.
B82789C0113N002
TDK B82789C0113N002 is a 2-function data line filter with inductance of 11uH and rated current of 0.3A. It operates b/w -55 to 125°C, has a max DC resistance of 0.25 ohm, and output impedance of 50 ohm. Suitable for surface mount applications, it provides effective filtering for data lines in various electronic devices.
B82790-C105-N240
DATA LINE FILTER; Maximum DC Resistance: .17 ohm; Rated Current: .5 A; Inductance: 1000 uH; Height: 4.9 mm; Packing Method: TAPE AND REEL;
B82789C0104H002
TDK B82789C0104H002 is an 80V data line filter with 100uH inductance and 1.5 ohm max DC resistance. Ideal for IEC-approved applications, it has 2 functions and operates b/w -55°C to 150°C.
B82790C0474N215
DATA LINE FILTER; Maximum DC Resistance: .17 ohm; Rated Current: .5 A; Inductance: 470 uH; Output Impedance (ohm): 50 OHM; Rated Voltage: 80 V;
B82790S0253N201
DATA LINE FILTER; Maximum DC Resistance: .11 ohm; Rated Current: .5 A; JESD-609 Code: e3; Length: 7.1 mm; No. of Terminals: 4;
B82790-C113-N201
DATA LINE FILTER; Maximum DC Resistance: .08 ohm; Rated Current: .5 A; Height: 4.9 mm; Dimensions: L7.1XB6.0XH4.9 (mm)/L0.28XB0.236XH0.193 (inch); Inductance: 11 uH;
B82790C0502N201
DATA LINE FILTER; Maximum DC Resistance: .06 ohm; Rated Current: 1 A; Terminal Finish: MATTE TIN OVER NICKEL; Approvals (V): UL; IEC; Rated Voltage: 80 V;
B82790-C474-N215
DATA LINE FILTER; Maximum DC Resistance: .17 ohm; Rated Current: .5 A; Dimensions: L7.1XB6.0XH4.9 (mm)/L0.28XB0.236XH0.193 (inch); No. of Terminals: 4; Approvals (V): UL; IEC;
B82789C0513H001
DATA LINE FILTER; Maximum DC Resistance: .55 ohm; Rated Current: .25 A; Height: 3 mm; Rated Voltage: 80 V; No. of Terminals: 4;
B82790C0475N265
B82790C0475N265 by TDK is a data line filter with a rated voltage of 80V and inductance of 4700uH. It has 2 functions and is approved by UL and IEC. This filter is suitable for surface mount applications requiring a max DC resistance of 0.51 ohm.
B82799S0513N001
B82799S0513N001 by TDK is a data line filter with a rated voltage of 80V and inductance of 51uH. It has 4 terminals and is approved by UL. This filter is commonly used for noise suppression in electronic devices.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved