Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's BLM15EG121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a DC resistance of 0.095 ohm and output impedance of 120 ohm. Ideal for applications requiring filtering in the frequency range of 100-1000 MHz.
Median Price
$0.068
Lifecycle Status
Suppliers In-Stock
52
In-Stock Inventory
1k+
Newark
1+ parts
$0.111
100+ parts
$0.043
1k+ parts
$0.023
10k+ parts
-
DigiKey
$0.170
$0.082
$0.055
$0.045
Mouser Electronics
$0.078
$0.052
$0.044
Adafruit Industries
$2.389
$2.269
Avnet
$0.037
TTI Europe
Verical
$0.014
Future Electronics
$0.079
Farnell
$0.059
$0.032
Chip1Stop
$0.076
$0.051
$0.035
TTI
$0.038
Arrow
$0.040
RS (Exports)
Element14
$0.080
$0.050
Nova Conductors
DF Sales Co.
$0.064
Component Electronics Inc.
$0.150
$0.120
$0.100
TME
$0.160
$0.072
$0.048
$0.031
IBS Electronics
$0.344
$0.265
$0.058
Chip Stock
Rebound Electronics
Vyrian
NAC Semi
$0.162
Component Sense
Prism Electronics
SPM Sales
Speed Components Ltd
Schukat
$0.021
Sea View Technologies
Sensible Micro Corp
Rutronik
Inventory MP
A2Z Electronics, Inc.
Bristol Electronics
Contempo Components LLC
Classic Components Corporation
Atlantic Semiconductor
Semi Source
PC Components Company LLC
First Choice Components Inc.
EMSNET
Dan-Mar Components
Next Level Components, LLC
Conversion2
VNN
Sogenti Electronics
Semtec, LLC
ComSIT Distribution GmbH
Legend Electronics Inc.
Martec Srl
Cyclops Electronics Ltd
Semicontronic
$0.020
$0.019
Argo Parts USA
$0.042
Continental Prestige Electronics
Bastille Electronics
$0.041
CoreStaff
$0.039
Aztec Data Supply Inc.
$1.923
Advanced Electronics
Corohmni
$3.184
Abacus Technologies
GreenTree Electronics
$0.017
S.R.D Solutions
iodParts Technologies Inc.
$0.025
Kepictronics
Eastek
Futuretech Components
Speed Components Ltd (Excess)
Robosynatics
$3.134
$3.070
Lucentia Tech
Formix International (Excess)
Alle Elektronik GmbH
Legend Electronics Inc. (Excess)
This product features a chip bead construction, providing reliable performance and durability.
With 2 terminals, this data line filter offers easy installation and connection to your system.
The compact 0402 case code allows for space-saving integration into various electronic devices.
Utilizing ferrite chip technology, this filter effectively reduces electromagnetic interference for clean data signals.
With a high maximum operating temperature of 125°C, this filter can withstand demanding thermal conditions.
The low minimum operating temperature of -55°C ensures reliable performance in cold environments.
The terminal finish of tin provides excellent conductivity and corrosion resistance for long-lasting use.
The slim width of 0.5mm allows for easy integration into tight spaces or crowded circuit boards.
With a minimum frequency of 100 MHz, this filter is suitable for a wide range of applications.
The low maximum DC resistance of 0.095 ohm ensures minimal power loss and efficient data transmission.
The length of 1mm provides a compact footprint, ideal for small electronic devices or PCB designs.
With a high maximum frequency of 1000 MHz, this filter offers compatibility with high-speed data transmission.
The output impedance of 120 ohm helps maintain signal integrity and reduce signal distortion.
This product is conveniently packaged in tape and reel format, ensuring easy handling and storage.
Featuring a surface mounting type, this filter can be easily and securely attached to PCBs.
The compact dimensions of 1.0x0.5x0.5mm make this filter suitable for space-constrained applications.
With a rated current of 0.9 A, this filter can handle moderate power loads while maintaining optimal performance.
The low height of 0.5mm allows for flexible installation options and compatibility with slim electronic devices.
Constructed with ferrite material, this filter offers excellent EMI suppression and noise reduction capabilities.
Data Line Filters BLM15EG121SN1D attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
BLM15EG121SN1D Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99WT1G
Fairchild Semiconductor
USB2514BI-AEZG
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
1552200168
Molex
WIRE AND CABLE;
Taitron Components
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
7427927141
Wuerth Elektronik & Kg
Wurth Elektronik 7427927141 is a FERRITE CHIP data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L1.0XB0.5XH0.5 (mm), it is ideal for surface mount applications requiring an output impedance of 470 OHM at a rated current of 0.25 A.
BLM31SN500SZ1L
Murata Manufacturing
Murata's BLM31SN500SZ1L is a FERRITE CHIP filter with 2 terminals, rated for 12A current. It operates b/w -55°C to 150°C, with max DC resistance of 0.0016 ohm. Ideal for data line filtering in automotive applications due to AEC-Q200 screening and compact dimensions of L3.2xB1.6xH1.1 mm.
SRF2012A-801Y
Bourns
Bourns SRF2012A-801Y is a data line filter with 2 functions, rated at 100V. It offers high insulation resistance of 10 Mohm and operates b/w -55 to 125 °C. Ideal for automotive applications due to AEC-Q200 screening level.
NFM18CC223R1C3D
Murata Manufacturing's NFM18CC223R1C3D is a data line filter with 1 function, rated for 16V and 1A. Featuring FEED THROUGH CAPACITOR type, it offers high insulation resistance of 1000 Mohm. Ideal for applications requiring filtering in compact spaces with temperatures ranging from -55 to 125°C.
74279224551
Wurth Elektronik 74279224551 is a FERRITE CHIP data line filter with 2 terminals. It operates b/w -55 to 125 °C, has a DC resistance of 0.035 ohm, and an output impedance of 550 OHM. Ideal for surface mount applications, it measures L5.59xB5.08xH1.8 mm and can handle a rated current of 4 A.
TCK-050
Traco Electronic Ag
Traco Electronic Ag's TCK-050 is a Data Line Filter with 2 functions, inductance of 325uH, and max DC resistance of 0.035 ohm. It is used for noise suppression in data lines, measuring L11.0xB11.0xH8.8mm and rated for 3.3A current flow through THROUGH HOLE MOUNT installation.
SRF2012-900YA
Bourns SRF2012-900YA is a Data Line Filter with 2 functions, rated at 50V and 0.4A. It offers high insulation resistance of 10 Mohm, operates b/w -40 to 125 °C, and has a compact size of L2.0xB1.2XH1.2 (mm). Ideal for applications requiring effective filtering in limited space like consumer electronics and communication devices.
742792663
Wurth Elektronik 742792663 is a 0603 multi-layer FERRITE CHIP filter with dimensions L1.6XB0.8XH0.8 (mm). It operates b/w -55 to 125 °C, has a max frequency of 150 MHz, and DC resistance of 0.85 ohm. Ideal for data line filtering applications due to its surface mount design and output impedance of 1000 OHM.
ILHB0805ER121V
Vishay Intertechnology
Vishay Intertechnology's ILHB0805ER121V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.03 ohm, and output impedance of 120 OHM. Ideal for surface mount applications in electronics requiring noise suppression at frequencies up to 100 MHz.
BLM41PG102SN1L
Murata Manufacturing's BLM41PG102SN1L is a chip bead data line filter with 2 terminals, rated for 1.5A current and 1000 ohm output impedance. With dimensions of L4.5XB1.6XH1.6 (mm), it operates b/w -55 to 125 °C, ideal for surface mount applications in filtering frequencies from 100 MHz with max DC resistance of 0.09 ohm.
744224
Wuerth Elektronik & Kg 744224 Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 250uH. UL approved for applications requiring output impedance of 1800 ohm and rated current of 1.2A. Ideal for surface mount installations in electronics to filter data lines efficiently.
P0429NLT
Pulse Electronics
Pulse Electronics P0429NLT is a data line filter with 2 functions, AEC-Q200 screening level. It has inductance of 810uH, rated current of 9.7A, and max operating temp of 120°C. Ideal for automotive applications due to its surface mounting type and compact dimensions (L30.99xB25.4xH12.7 mm).
74279218
Wurth Elektronik 74279218 is a multi-layer FERRITE CHIP filter with dimensions L3.2XB1.6XH1.1 (mm). It has a max operating temperature of 125°C and min frequency of 90 MHz, suitable for data line filtering applications in surface mount configurations.
PA3747.306NL
PA3747.306NL by Pulse Electronics is a data line filter with 2 functions, AEC-Q200 screening level, and 4 terminals. It has an inductance of 19500 uH, max operating temperature of 125°C, and rated current of 0.75 A. Ideal for applications requiring high output impedance and through hole mounting.
SRF0905-500Y
Bourns SRF0905-500Y is a Data Line Filter with 2 functions, rated at 50V. Featuring an inductance of 50uH and max DC resistance of 0.32 ohm, it operates b/w -40 to 105°C. Ideal for applications requiring a surface mount filter with dimensions of L9.2xB6.0xH5.0mm, such as data transmission systems or electronic devices needing noise suppression.
MI0805L301R-10
Laird Technologies
MI0805L301R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 300 OHM. Ideal for surface mount applications, this ferrite chip filter has a max DC resistance of 0.06 ohm and rated current of 2 A.
BLM18PG121SN1
Murata Manufacturing's BLM18PG121SN1 is a FERRITE CHIP data line filter with 120 OHM output impedance, 2A rated current, and -55 to 125 °C operating temperature range. It is designed for surface mount applications requiring effective filtering in compact spaces.
FBMH1608HM101-T
Taiyo Yuden
Taiyo Yuden's FBMH1608HM101-T is a chip bead data line filter with 2 terminals, ideal for applications requiring noise suppression. With a max operating temperature of 85°C and DC resistance of 0.035 ohm, it offers effective filtering up to 100 MHz. This surface mount filter measures L1.6xB0.8xH0.8 mm and is suitable for high-speed data transmission systems.
BLM15PD300SN1D
Murata's BLM15PD300SN1D is a chip bead data line filter with 2 terminals, rated for 1.4A current and output impedance of 30 ohm. It operates b/w -55 to 125°C, suitable for filtering frequencies from 100 MHz with dimensions of L1.0xB0.5xH0.5 mm in surface mount applications.
504-6
West Coast Magnetics
504-6 by West Coast Magnetics is a data line filter with 2 functions and 4 terminals. It has an inductance of 110 uH and max DC resistance of 0.0024 ohm. This surface mount filter is used for noise suppression in data lines.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BLM18PG121SN1D
Murata's BLM18PG121SN1D is a chip bead data line filter with 2 terminals, rated for 2A current. It operates b/w -55°C to 125°C, offering 120 ohm impedance at 100MHz frequency. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.
BLM18AG102SN1D
Murata Manufacturing's BLM18AG102SN1D is a chip bead data line filter with 2 terminals, rated for 0.4A current. With dimensions of 1.6x0.8x0.8mm, it operates b/w -55°C to 125°C and offers an output impedance of 1000Ω at frequencies up to 100MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
BLM18PG471SN1D
BLM18PG471SN1D by Murata Manufacturing is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This filter is commonly used in applications requiring noise suppression in data lines.
BLM15AG121SN1D
Murata Manufacturing's BLM15AG121SN1D is a 0402 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. With a DC resistance of 0.19 ohm, it offers an output impedance of 120 OHM at a frequency range of 100 MHz. Ideal for data line filtering applications due to its compact size and surface mounting type.
BLM18HE152SN1D
BLM18HE152SN1D by Murata is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. It offers a DC resistance of 0.5 ohm, output impedance of 1500 ohm, and rated current of 0.4 A. Ideal for applications requiring surface mount filters in the frequency range of 100-1000 MHz.
BLM18AG601SN1D
Murata's BLM18AG601SN1D is a chip bead data line filter with 2 terminals, rated for 0.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.6xB0.8xH0.8 mm.
BLM18AG121SN1D
Murata Manufacturing's BLM18AG121SN1D is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and matte tin finish. It operates b/w -55°C to 125°C, has a DC resistance of 0.18 ohm, and output impedance of 120 OHM. Ideal for surface mount applications in filtering data lines up to 100 MHz frequency range.
BLM18EG221SN1D
Murata Manufacturing's BLM18EG221SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 1000 MHz and DC resistance of 0.05 ohm. Ideal for surface mount applications in filtering data lines with an output impedance of 260 ohm at frequencies ranging from 100 MHz to 1000 MHz.
BLM18PG600SN1D
Murata Manufacturing's BLM18PG600SN1D is a chip bead data line filter with 2 terminals, operating from -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.1 ohm and output impedance of 60 ohm at frequencies up to 100 MHz. Ideal for surface mount applications, this ferrite chip filter is designed to handle up to 0.5A rated current in various electronic circuits.
BLM18PG300SN1D
BLM18PG300SN1D by Murata is a chip bead data line filter with 2 terminals, rated current of 1A, and output impedance of 30 ohm. It operates b/w -55 to 125 °C and has dimensions of L1.6xB0.8xH0.8 mm. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
BLM15AG100SN1D
Murata BLM15AG100SN1D is a chip bead data line filter with 2 terminals, rated for 1A current. It offers a DC resistance of 0.025 ohm and output impedance of 10 ohm at frequencies ranging from 100 MHz. Ideal for surface mount applications in electronics to suppress noise and interference.
BLM18SG121TN1D
Murata Manufacturing's BLM18SG121TN1D is a chip bead data line filter with 2 terminals, rated for 3A current. It operates b/w -55°C to 125°C, offering 120 ohm output impedance at 100MHz frequency. Ideal for surface mount applications requiring effective filtering in compact spaces.
BLM15AG221SN1D
Murata's BLM15AG221SN1D is a 0402 chip bead filter with 220 ohm output impedance, 0.29 ohm DC resistance, and 0.45 A rated current. It operates b/w -55 to 125 °C and is ideal for data line filtering applications due to its ferrite construction and surface mounting type.
BLM18PG181SN1D
Murata Manufacturing's BLM18PG181SN1D is a chip bead data line filter with 2 terminals, rated for 1.5A current and 180 ohm output impedance. It operates b/w -55°C to 125°C, ideal for surface mount applications in filtering frequencies from 100 MHz with dimensions of L1.6xB0.8xH0.8 mm.
BLM15AG601SN1D
Murata Manufacturing's BLM15AG601SN1D is a 0402 chip bead filter with 2 terminals. It operates b/w -55 to 125°C, has a DC resistance of 0.52 ohm, and output impedance of 600 ohm. Ideal for data line filtering applications due to its compact size (L1.0xB0.5xH0.5 mm) and rated current of 0.3 A.
BLM18EG601SN1D
Murata's BLM18EG601SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.35 ohm, output impedance of 700 OHM, and rated current of 0.5 A. Ideal for surface mount applications in filtering frequencies from 100 MHz to 1000 MHz.
BLM18KG601SN1D
Murata Manufacturing's BLM18KG601SN1D is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and 0.8mm width. Operating b/w -55 to 125 °C, it has a DC resistance of 0.15 ohm and output impedance of 600 OHM. Ideal for surface mount applications in electronics for noise suppression at frequencies ranging from 100 MHz.
BLM15AG102SN1D
Murata Manufacturing's BLM15AG102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L1.0XB0.5XH0.5 (mm), it offers a max frequency of 100 MHz and DC resistance of 0.65 ohm, suitable for surface mount applications in electronics for impedance matching and noise suppression.
BLM18HE102SN1D
BLM18HE102SN1D by Murata is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 1000 MHz and DC resistance of 0.35 ohm. Ideal for surface mount applications in electronics requiring impedance matching up to 1000 OHM at frequencies ranging from 100 MHz to 1000 MHz.
BLM15HG102SN1D
Murata Manufacturing's BLM15HG102SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1x0.5x0.5mm, it offers a DC resistance of 1.1 ohm and an output impedance of 1000 ohm for frequencies ranging from 100MHz to 1000MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved