Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .3 ohm; Material: Ferrite; Rated Current: .5 A; Dimensions: L3.2XB1.6XH1.1 (mm)/L0.126XB0.063XH0.043 (inch);
Median Price
$0.055
Lifecycle Status
Suppliers In-Stock
41
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.030
100+ parts
-
1k+ parts
10k+ parts
RS (Exports)
Arrow
$0.121
$0.085
$0.060
Mouser Electronics
$0.130
$0.064
$0.048
Distrelec
$0.131
$0.098
$0.065
Adafruit Industries
$0.216
$0.197
$0.177
Sager
$0.077
Verical
$0.044
$0.041
Farnell
$0.050
Element14
$0.051
Heilind Electronics
$0.028
Newark
$0.166
$0.117
DigiKey
$0.027
Interstate Connecting
$0.035
TTI
Nova Conductors
$0.062
Vyrian
Rebound Electronics
TME
$0.040
Bristol Electronics
NAC Semi
Prism Electronics
Connector Distribution Corp
Right Parts Inc.
ACDS - Activité Composants Distribution Service
Sea View Technologies
Florida Circuit
Semi Source
Goldney Electronics S.L.
Atlantic Semiconductor
PC Components Company LLC
Inventory MP
Resion
Semtec, LLC
Classic Components Corporation
Odi Ramu Company
Sensible Micro Corp
Sunrise Surplus Inc.
Contempo Components LLC
A&K Electronics
EMSNET
Argo Parts USA
Corohmni
Allen Electronics Distributors
$0.090
Advanced Electronics
Aztec Data Supply Inc.
$2.522
Perfect Parts
Metaverse IC Inc.
GreenTree Electronics
Infinite Electronics LLP (Excess)
Authorized Procurement Solutions
Continental Prestige Electronics
$0.049
Cyclops Electronics Ltd (Excess)
Eastek
Computer Components Inc. - USA
Netroflash
$0.058
$0.057
Data Line Filters HZ1206E601R-10 attributes and parameters. Explore more Data Line Filters devices from Steward
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Height:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
HZ1206E601R-10 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
LM555CMX
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Telefunken Microelectronics
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
1N4148WS
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
MBR0520LT1
Onsemi
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
Sensitron Semiconductor
IP4252CZ16-8-TTL,1
Nexperia
DATA LINE FILTER; Maximum DC Resistance: 48 ohm; Terminal Finish: NICKEL PALLADIUM GOLD SILVER; No. of Functions: 1; Width (mm): 1.35; Approvals (V): IEC;
SRF0905-652Y
Bourns
Bourns SRF0905-652Y is a Data Line Filter with 2 functions, rated voltage of 50V, and inductance of 6500uH. It operates b/w -40°C to 105°C, has a max DC resistance of 1.05 ohm, and output impedance of 5000 ohm. This filter is ideal for applications requiring noise suppression in data lines.
DLW21HN121SQ2L
Murata Manufacturing
DLW21HN121SQ2L by Murata is a Data Line Filter with 2 functions and rated voltage of 50V. It has a max operating temperature of 85°C and min insulation resistance of 10 Mohm. This filter is suitable for applications requiring noise suppression in data lines.
MMZ2012S601AT000
TDK
TDK MMZ2012S601AT000 is an 0805 chip bead filter with 2 terminals, rated at 0.5A. With a max DC resistance of 0.3 ohm and output impedance of 600 ohm, it's ideal for data line filtering applications. Operating b/w -55 to 125 °C, this ferrite chip measures L2.0xB1.25xH0.85 mm and has TIN NICKEL COPPER terminal finish.
PA2745NLT
Pulse Electronics
PA2745NLT by Pulse Electronics is a Data Line Filter with 2 functions and 4 terminals. It offers an inductance of 130uH, rated current of 5A, and max operating temperature of 130°C. Ideal for applications requiring surface mount filters for data lines with high current demands.
IP4252CZ8-4-TTL,13
DATA LINE FILTER; Maximum DC Resistance: 48 ohm; Minimum Operating Temperature: -40 Cel; Width (mm): 1.35; Approvals (V): IEC; Height: .55 mm;
74279279
Wuerth Elektronik & Kg
Wurth Elektronik 74279279 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, has a DC resistance of 1 ohm, and an output impedance of 600 OHM at frequencies ranging from 100 MHz to 180 MHz. This surface mount component measures L1.0XB0.5XH0.5 (mm) and is packed in TAPE AND REEL format for easy handling during assembly.
BLM18HE152SN1J
Murata Manufacturing's BLM18HE152SN1J is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of 1.6x0.8x0.8 mm, it offers a frequency range from 100 MHz to 1000 MHz and an output impedance of 1500 ohm. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
BLM15GG221SN1D
Murata's BLM15GG221SN1D is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring a ferrite chip construction, it offers an output impedance of 220 ohm and operates b/w -55°C to 125°C. With dimensions of L1.0xB0.5xH0.5 mm, this filter is designed for frequencies ranging from 100 MHz to 1000 MHz.
74279221111
Wurth Elektronik 74279221111 is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 5.4A current and 110Ω output impedance. Ideal for surface mount applications, it operates b/w -55°C to 125°C, measuring L3.2xB1.6xH1.1mm (L0.126xB0.063xH0.043 inch).
7427927161
Wurth Elektronik 7427927161 is a FERRITE CHIP filter with 2 terminals, rated for 0.51A current. It operates b/w -55 to 125 °C and has a max DC resistance of 0.56 ohm. Ideal for data line filtering in surface mount applications due to its compact dimensions of L1.0xB0.5xH0.5 mm.
EMIF06-USD14F3
STMicroelectronics
EMIF06-USD14F3 by STMicroelectronics is a data line filter with 6 functions and 15 terminals. It operates b/w -30°C to 85°C, with a capacitance of 12uF. This surface mount filter is ideal for applications requiring IEC and UL approvals.
MPZ1608S101ATAH0
The TDK MPZ1608S101ATAH0 is a chip bead data line filter with 2 terminals, rated for 3A current. It operates b/w -55°C to 125°C, with dimensions of 1.6x0.8x0.8mm and a max frequency of 100MHz. Ideal for noise suppression in electronic circuits requiring impedance of 100 ohms at frequencies above 100MHz.
MPZ2012S300AT000
TDK's MPZ2012S300AT000 is a chip bead data line filter with 2 terminals. It operates b/w -55°C to 125°C, offering a max DC resistance of 0.01 ohm and output impedance of 30 ohm at 100 MHz. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
BK1608HS220-T
Taiyo Yuden
BK1608HS220-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, ideal for applications requiring noise suppression. With a max operating temperature of 125°C and min frequency of 100 MHz, it offers low DC resistance of 0.05 ohm. This ferrite chip filter has dimensions of L1.6xB0.8xH0.8 (mm) and is suitable for surface mounting type in tape and reel packing method.
FBMH3216HM221NTV
Taiyo Yuden's FBMH3216HM221NTV is a Ferrite Chip Data Line Filter with 2 terminals, rated for 4A current. It offers an output impedance of 220 ohm and operates b/w -40°C to 125°C. Ideal for surface mount applications requiring effective noise filtering in compact spaces.
DSS9NC51H223Q55B
Murata Manufacturing's DSS9NC51H223Q55B is a 50V rated data line filter with 7A current capacity. With dimensions of L12xB7.5xH10.5 (mm), it operates b/w -25°C to 85°C, making it suitable for various applications requiring noise suppression in data lines.
BLM18HE152SN1D
BLM18HE152SN1D by Murata is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. It offers a DC resistance of 0.5 ohm, output impedance of 1500 ohm, and rated current of 0.4 A. Ideal for applications requiring surface mount filters in the frequency range of 100-1000 MHz.
MMZ1608Y152BTD25
TDK's MMZ1608Y152BTD25 is a chip bead data line filter with 2 terminals. It offers a max operating temperature of 125°C and min of -55°C. With an output impedance of 1500 ohms, it is ideal for surface mount applications in automotive electronics.
BLM18AG601SN1
Murata Manufacturing's BLM18AG601SN1 is a FERRITE CHIP data line filter with dimensions 1.6x0.8x0.8mm, suitable for surface mount applications. It has a max DC resistance of 0.38 ohm, output impedance of 600 ohm, and can operate b/w -55 to 125°C. Ideal for noise suppression in electronic circuits requiring a rated current of 0.5A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HZ1206E601R-10
Laird Technologies
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .3 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .5 A;
HZ1206C202R-10
Steward
FERRITE CHIP; Maximum DC Resistance: .5 ohm; Rated Current: .3 A; Maximum Operating Temperature: 125 Cel; Output Impedance (ohm): 2000 OHM; No. of Terminals: 2;
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .5 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .3 A;
HZ1206E152R-10
The Laird Technologies HZ1206E152R-10 is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. It offers a frequency range of 25 MHz to 1000 MHz and an output impedance of 950 ohm. Ideal for surface mount applications, it measures L3.2XB1.6XH1.1 mm and has a max DC resistance of 0.3 ohm, suitable for filtering high-frequency signals in electronic circuits.
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .3 ohm; Maximum Frequency: 50 MHz; Material: Ferrite; Rated Current: .5 A;
HZ1206E152R-00
FERRITE CHIP; Maximum DC Resistance: .3 ohm; Rated Current: .5 A; Rated Voltage: 75 V; Packing Method: TAPE AND REEL; Output Impedance (ohm): 1500 OHM;
HZ1206E601R-00
FERRITE CHIP; Maximum DC Resistance: .3 ohm; Rated Current: .5 A; JESD-609 Code: e0; Width (mm): 1.6; Minimum Operating Temperature: -55 Cel;
HZ1206E801R-00
FERRITE CHIP; Maximum DC Resistance: .3 ohm; Rated Current: .5 A; No. of Functions: 1; Output Impedance (ohm): 800 OHM; Width (mm): 1.6;
HZ1206D102R-10
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .4 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .4 A;
FERRITE CHIP; Maximum DC Resistance: .4 ohm; Rated Current: .4 A; No. of Functions: 1; Minimum Operating Temperature: -55 Cel; Dimensions: L3.2XB1.6XH1.1 (mm)/L0.126XB0.063XH0.043 (inch);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved