Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's DSS1NB32A103Q91A is a 3-terminal data line filter with 1000 Mohm insulation resistance, 100 V rated voltage, and 6 A rated current. It operates b/w -40 to 85 °C and has a capacitance of 10000 uF. Ideal for applications requiring noise suppression in data lines.
Median Price
$0.230
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Farnell
1+ parts
$0.456
100+ parts
$0.351
1k+ parts
$0.289
10k+ parts
$0.240
Newark
$0.579
$0.372
$0.323
$0.311
DigiKey
$0.630
$0.417
$0.362
$0.290
Mouser Electronics
$0.385
$0.334
$0.267
Element14
$0.782
$0.482
$0.454
$0.395
Arrow
-
$0.196
Verical
TTI Europe
$0.125
Future Electronics
$0.085
TTI
$0.265
RS (Exports)
$0.136
Chip1Stop
$0.184
$0.168
Ozdisan Elektronik
$0.206
Nova Conductors
$0.237
TME
$0.470
$0.209
$0.151
NAC Semi
$0.148
Vyrian
IBS Electronics
NexGen Digital
ACDS - Activité Composants Distribution Service
SOS electronic
$0.409
$0.371
$0.360
Martec Srl
ComSIT Distribution GmbH
Semicontronic
$0.113
$0.110
Advanced Electronics
$0.160
Argo Parts USA
$0.170
$0.165
Netroflash
Continental Prestige Electronics
$0.352
$0.312
$0.154
CoreStaff
$0.487
$0.128
$0.088
Corohmni
$0.737
Modulus Dynamics
$2.302
Aztec Data Supply Inc.
$2.940
Eastek
Abacus Technologies
GreenTree Electronics
Glotronic Ltd.
Authorized Procurement Solutions
Infinite Electronics LLP (Excess)
High insulation resistance ensures reliable and safe operation, reducing the risk of electrical faults or short circuits.
Suitable for use in various electronic devices and applications that operate within the 100V range.
Having 3 terminals allows for easy and secure connections, ensuring stable performance.
A data line filter helps to reduce electromagnetic interference, providing cleaner and more reliable data transmission.
With a high maximum operating temperature, this product can withstand elevated temperatures without compromising performance.
Can operate in extremely cold environments without any issues, making it versatile for different operating conditions.
Compact size makes it easy to integrate into various electronic devices without taking up too much space.
Optimal length for fitting into standard electronic component layouts, ensuring compatibility with existing designs.
Ammo pack packaging provides convenience in storage and handling, protecting the product during transportation and storage.
Through hole mounting ensures secure attachment to circuit boards, reducing the risk of disconnection or damage during operation.
With a high rated current capacity, this filter can handle higher electrical loads without overheating or performance degradation.
Low profile design fits well in compact spaces, making it suitable for applications with limited vertical clearance.
High capacitance value helps in filtering out unwanted noise or electrical disturbances, improving overall signal quality.
Data Line Filters DSS1NB32A103Q91A attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Capacitance:
Filter Type:
Height:
Minimum Insulation Resistance:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Rated Current:
Rated Voltage:
Width (mm):
DSS1NB32A103Q91A Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Assembly/Origin - DSS1 Series Location 01/Jan/2021
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
1N4148
Microchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Lite-on Semiconductor
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
Sangdest Microelectronics (Nanjing)
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
International Semiconductor
SN65HVD230DR
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
BAV99
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
Dc Components
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
4554
Jw Miller Magnetics
Other Semiconductors;
ILHB0805ER601V
Vishay Intertechnology
Vishay Intertechnology's ILHB0805ER601V is a 2-terminal data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.1 ohm, and an output impedance of 600 OHM. Ideal for surface mount applications in electronics requiring filtering at frequencies up to 100 MHz.
BLM21BB750SN1D
Murata Manufacturing
Murata Manufacturing's BLM21BB750SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55°C to 125°C. With a DC resistance of 0.16 ohm and output impedance of 75 ohm, it's ideal for data line filtering applications at frequencies ranging from 100 MHz.
DLW43SH101XK2B
Murata Manufacturing's DLW43SH101XK2B is a FERRITE CHIP filter with 100uH inductance, 10 Mohm insulation resistance, and 2 ohm max DC resistance. It has 4 terminals, rated for 0.2A current at 50V. Ideal for automotive applications due to AEC-Q200 screening level.
BLM18SG331TN1D
BLM18SG331TN1D by Murata is a chip bead data line filter with 2 terminals, rated for 1A current. It operates b/w -55°C to 125°C, offering an output impedance of 330 ohm at frequencies ranging from 100 MHz. This ferrite chip filter in a 0603 case is ideal for surface mount applications in various electronic devices.
BLM18KG331SN1D
Murata Manufacturing's BLM18KG331SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max DC resistance of 0.08 ohm and output impedance of 330 OHM at 100 MHz frequency. Ideal for surface mount applications in electronic devices requiring noise suppression.
BLM18KG601SN1D
Murata Manufacturing's BLM18KG601SN1D is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and 0.8mm width. Operating b/w -55 to 125 °C, it has a DC resistance of 0.15 ohm and output impedance of 600 OHM. Ideal for surface mount applications in electronics for noise suppression at frequencies ranging from 100 MHz.
NFE31PT471F1E9L
Murata Manufacturing's NFE31PT471F1E9L is a 3-terminal data line filter with 1000 Mohm insulation resistance, 25V rated voltage, and 470uF capacitance. It operates b/w -40 to 85 °C and has matte tin over nickel terminal finish. Ideal for surface mount applications requiring up to 6A current filtering.
ACM2012-121-2P-T002
TDK
TDK's ACM2012-121-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 50V and 0.37A. With dimensions of L2.0xB1.2xH1.3 (mm), it offers high insulation resistance for data line filtering applications in electronics, ensuring reliable performance from -40 to 85 °C temperatures.
MPZ2012S101ATD25
TDK's MPZ2012S101ATD25 is a FERRITE CHIP filter with 2 terminals, rated for 4A current. With dimensions of L2.0xB1.25xH0.85 (mm), it operates b/w -55 to 125 °C and has a max DC resistance of 0.02 ohm. Ideal for data line filtering in automotive applications due to AEC-Q200 screening level compliance.
SRF0905-472Y
Bourns
Bourns SRF0905-472Y is a Data Line Filter with 2 functions, rated at 50V and inductance of 4700uH. It operates b/w -40 to 105°C, has a max DC resistance of 0.9 ohm, and output impedance of 4000 ohm. Ideal for applications requiring surface mount filters for data lines.
BLM21PG331SH1D
BLM21PG331SH1D by Murata is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.09 ohm, output impedance of 330 OHM, and rated current of 1.5 A. Ideal for data line filtering applications at frequencies ranging from 100 MHz with surface mounting type.
744231371
Wuerth Elektronik & Kg
Wurth Elektronik 744231371 is a Data Line Filter with 2 functions, rated at 50V. With dimensions of L2.0XB1.2XH1.2 (mm), it operates b/w -40 to 125 °C and has a max DC resistance of 0.45 ohm. Ideal for surface mount applications, it offers an output impedance of 370 OHM and a rated current of 0.28 A.
P0422NLT
Pulse Electronics
Pulse Electronics P0422NLT is a data line filter with 2 functions, AEC-Q200 screening level, and inductance of 770uH. It operates b/w -40°C to 120°C, has a max DC resistance of 0.04 ohm, and rated current of 4.7A. Ideal for surface mount applications in automotive electronics due to its compact size (L19.56xB17.02xH9.91 mm).
MPZ2012S300AT000
TDK's MPZ2012S300AT000 is a chip bead data line filter with 2 terminals. It operates b/w -55°C to 125°C, offering a max DC resistance of 0.01 ohm and output impedance of 30 ohm at 100 MHz. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
BLM18HG102SN1D
Murata Manufacturing's BLM18HG102SN1D is a 0603 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. With a max frequency of 1000 MHz and DC resistance of 1.6 ohm, it is ideal for data line filtering applications requiring an output impedance of 1000 OHM.
IP4256CZ5-W,115
Nexperia
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Rated Voltage: 5.6 V; Length: 1.7 mm; No. of Functions: 1; Approvals (V): IEC;
BKP2125HS600-TV
Taiyo Yuden
BKP2125HS600-TV by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals, rated for 3A current. It offers a max DC resistance of 0.025 ohm and an output impedance of 60 ohm. Ideal for surface mount applications in electronics, it operates b/w -55 to 85 °C temperatures.
ACT1210-101-2P-TL00
TDK's ACT1210-101-2P-TL00 is a data line filter with 10 Mohm insulation resistance, 80V rated voltage, and 100uH inductance. It has 2 functions and operates b/w -40 to 150 °C, making it ideal for automotive applications meeting AEC-Q200 standards.
NFM18PC105R0J3D
Murata Manufacturing's NFM18PC105R0J3D is a FEED THROUGH CAPACITOR with 500 Mohm Min Insulation Resistance, 6.3V Rated Voltage, and 1000000uF Capacitance. Ideal for data line filtering applications due to its compact L1.6XB0.8XH0.8 (mm) size and surface mounting type.
BLM15PG100SN1D
BLM15PG100SN1D by Murata is a chip bead data line filter with 2 terminals, 0402 case code, and ferrite chip construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.025 ohm, and output impedance of 10 OHM. Ideal for applications requiring filtering at frequencies up to 100 MHz in surface mount configurations.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DSS1NB32A103Q55B
DATA LINE FILTER; Rated Current: 6 A; Height: 7.5 mm; No. of Functions: 1; Mounting Type: THROUGH HOLE MOUNT; Packing Method: BULK;
DSS1NB32A223Q55B
FEED THROUGH CAPACITOR; Rated Current: 6 A; Maximum Operating Temperature: 85 Cel; Height: 7.5 mm; Rated Voltage: 100 V; Capacitance: 22000 uF;
DSS1NB32A222Q91A
Murata Manufacturing's DSS1NB32A222Q91A is a 100V rated data line filter with 3 terminals. It has a capacitance of 2200uF and can handle up to 6A current. Ideal for applications requiring noise suppression in data lines, it operates b/w -40°C to 85°C temperatures.
DSS1NB32A222Q55B
FEED THROUGH CAPACITOR; Rated Current: 6 A; Minimum Operating Temperature: -40 Cel; Width (mm): 3.5; Length: 8.5 mm; Maximum Operating Temperature: 85 Cel;
DSS1NB32A103Q92A
FEED THROUGH CAPACITOR; Rated Current: 6 A; Packing Method: AMMO PACK; Capacitance: 10000 uF; Width (mm): 3.5; Maximum Operating Temperature: 85 Cel;
DSS1NB31H104Q91A
FEED THROUGH CAPACITOR; Rated Current: 6 A; Minimum Operating Temperature: -40 Cel; Minimum Insulation Resistance: 1000 Mohm; Capacitance: 100000 uF; Rated Voltage: 50 V;
DSS1NB32A102Q55B
FEED THROUGH CAPACITOR; Rated Current: 6 A; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Height: 7.5 mm; No. of Functions: 1;
DSS1NB32A222Q93A
Murata Manufacturing's DSS1NB32A222Q93A is a data line filter with 100V rated voltage, 2200uF capacitance, and 6A rated current. It is a feed through capacitor used for noise suppression in electronic circuits, offering insulation resistance of 1000 Mohm. Operating temperature ranges from -40 to 85°C making it suitable for various applications.
DSS1NB32A223Q91A
Murata Manufacturing's DSS1NB32A223Q91A is a 100V rated data line filter with 1000 Mohm insulation resistance. With a capacitance of 22000 uF and rated current of 6A, it operates b/w -40 to 85 °C. Ideal for applications requiring noise suppression in data lines, this through-hole mount filter measures L8.5xB3.5xH7.5 mm and comes in ammo pack packaging.
DSS1NB32A221Q91A
FEED THROUGH CAPACITOR; Rated Current: 6 A; Maximum Operating Temperature: 85 Cel; Capacitance: 220 uF; Minimum Insulation Resistance: 1000 Mohm; Width (mm): 3.5;
DSS1NB32A471Q91A
FEED THROUGH CAPACITOR; Rated Current: 6 A; Width (mm): 3.5; Minimum Insulation Resistance: 1000 Mohm; Minimum Operating Temperature: -40 Cel; No. of Functions: 1;
DSS1NB32A103Q93A
FEED THROUGH CAPACITOR; Rated Current: 6 A; Width (mm): 3.5; Capacitance: 10000 uF; Rated Voltage: 100 V; No. of Terminals: 3;
DSS1NB32A221Q55B
FEED THROUGH CAPACITOR; Rated Current: 6 A; Maximum Operating Temperature: 85 Cel; Capacitance: 220 uF; Width (mm): 3.5; No. of Terminals: 3;
DSS1NB32A102Q91A
Murata Manufacturing's DSS1NB32A102Q91A is a data line filter with 100V rated voltage, 1000uF capacitance, and 6A rated current. It features a feed through capacitor design for applications requiring noise suppression in electronic circuits. Operating temperature ranges from -40°C to 85°C, making it suitable for various industrial environments.
DSS1NB32A121Q91A
DATA LINE FILTER; Rated Current: 6 A; Mounting Type: THROUGH HOLE MOUNT; Capacitance: 120 uF; Length: 8.5 mm; No. of Functions: 1;
DSS1NB32A101Q55B
DATA LINE FILTER; Rated Current: 6 A; No. of Functions: 1; Mounting Type: THROUGH HOLE MOUNT; No. of Terminals: 3; Capacitance: 100 uF;
DSS1NB31H104Q55B
FEED THROUGH CAPACITOR; Rated Current: 6 A; Packing Method: BULK; BAG; No. of Functions: 1; Maximum Operating Temperature: 85 Cel; No. of Terminals: 3;
DSS1NB32A681Q91A
FEED THROUGH CAPACITOR; Rated Current: 6 A; Packing Method: AMMO PACK; Width (mm): 3.5; Length: 8.5 mm; Height: 7.5 mm;
DSS1NB32A682Q91A
FEED THROUGH CAPACITOR; Rated Current: 6 A; Mounting Type: THROUGH HOLE MOUNT; Packing Method: AMMO PACK; Maximum Operating Temperature: 85 Cel; Width (mm): 3.5;
DSS1NB32A101Q91A
FEED THROUGH CAPACITOR; Rated Current: 6 A; Width (mm): 3.5; Length: 8.5 mm; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved