Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's NFM18PC225B1A3D is a FEED THROUGH CAPACITOR with 200 Mohm Min Insulation Resistance, 10 V Rated Voltage, and 2200000 uF Capacitance. It operates b/w -40 to 85 °C and is ideal for data line filtering applications due to its compact size (L1.6XB0.8XH0.8 mm) and high rated current of 4 A.
Median Price
$0.152
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Arrow
1+ parts
$0.172
100+ parts
$0.103
1k+ parts
$0.095
10k+ parts
$0.068
TTI
-
$0.163
TTI Europe
$0.067
Verical
$0.326
$0.237
$0.209
Chip1Stop
$0.083
$0.060
$0.054
RS (Exports)
$0.142
Nova Conductors
$0.161
Component Sense
Chip Stock
Inventory MP
Vyrian
Rutronik
$0.040
Prism Electronics
Bristol Electronics
Speed Components Ltd
Micros
$0.065
ACDS - Activité Composants Distribution Service
Partservice
$0.081
$0.064
SPM Sales
LWI Electronics Inc
Semicontronic
$0.057
$0.056
$0.055
Argo Parts USA
$0.156
Netroflash
$0.153
$0.150
Corohmni
$0.634
Aztec Data Supply Inc.
$2.250
Advanced Electronics
$3.150
$2.992
AZTECH Wire
$16.500
Perfect Parts
Metaverse IC Inc.
iodParts Technologies Inc.
GreenTree Electronics
A-Z Elektronik GmbH
Authorized Procurement Solutions
Speed Components Ltd (Excess)
Legend Electronics Inc. (Excess)
Eastek
Robosynatics
Lucentia Tech
$1.098
$1.075
Continental Prestige Electronics
$0.165
$0.115
Formix International (Excess)
Higher insulation resistance ensures reliable and safe operation of the filter, preventing any electrical leakage or short circuits.
Suitable for use in low voltage applications, providing protection and filtering capabilities without risk of overload or damage.
Having three terminals allows for easy and secure connection, ensuring proper functionality and stability of the filter.
The feed-through capacitor design allows for effective noise suppression and filtering, improving the overall performance of the product.
With a high maximum operating temperature, this filter can withstand elevated temperatures without compromising performance, making it suitable for various environments.
The wide range of operating temperatures ensures that the filter can function reliably in both extreme cold and hot conditions, increasing its versatility.
Tin over nickel terminal finish provides excellent conductivity and corrosion resistance, ensuring a durable and long-lasting connection for the filter.
Compact width makes it suitable for applications with limited space, allowing for easy integration and installation in various electronic devices.
The appropriate length of the filter facilitates proper electrical connections and alignment within the circuit or device, ensuring optimal performance.
The tape and reel packaging method offers convenience and protection during shipping and handling, making it easy to store and transport the filters.
Surface mount design allows for easy and secure installation on PCBs, saving space and simplifying assembly processes for electronic equipment.
Compact dimensions make it suitable for small electronic devices and applications where space is limited, without compromising on performance.
A high rated current capacity ensures that the filter can handle higher electrical loads without overheating or malfunctioning, providing reliable protection for the circuit.
Low profile height allows for a slim and compact design, making it ideal for applications where space is a constraint while maintaining efficient filtering capabilities.
High capacitance value enables effective filtering of noise and interference, ensuring clean power delivery and improved performance of the connected electronic devices.
Data Line Filters NFM18PC225B1A3D attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Additional Features:
Capacitance:
Filter Type:
Height:
Minimum Insulation Resistance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
NFM18PC225B1A3D Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - Mult Devs 01/Apr/2022
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Weitron Technology
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Bytesonic Electronics
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WSF-7
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
BLM21PG600SN1J
Murata Manufacturing
Murata Manufacturing's BLM21PG600SN1J is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a width of 1.25mm and length of 2mm, it offers a max DC resistance of 0.025 ohm and output impedance of 60 ohm at frequencies up to 100 MHz. Ideal for data line filtering applications, this ferrite chip is rated for a current of 3A and features tin terminal finish in surface mount packaging.
PS1240P02BT
The TDK PS1240P02BT is a Data Line Filter with max operating temp of 70°C and min operating temp of -20°C. It has a diameter of 12.2mm and height of 6.5mm, suitable for through hole mounting applications in various electronic devices.
742792114
Wuerth Elektronik & Kg
Wurth Elektronik 742792114 is a multi-layer FERRITE CHIP filter with dimensions L3.2XB1.6XH1.1 (mm). It operates b/w -55 to 125 °C, has a DC resistance of 0.025 ohm, and output impedance of 50 OHM. Ideal for data line filtering applications with a frequency range from 100 MHz to 1000 MHz.
742792064
Wurth Elektronik 742792064 is a FERRITE CHIP Data Line Filter with 2 terminals, rated at 0.3A current. It operates b/w -55 to 125 °C and has a max DC resistance of 0.2 ohm. Ideal for applications requiring a compact surface mount filter with 75 OHM output impedance.
BLM18BB331SN1D
Murata Manufacturing's BLM18BB331SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 330Ω and max DC resistance of 0.58Ω. Ideal for surface mount applications, this ferrite chip filter has a rated current of 0.4A and is commonly used in electronic devices for noise suppression at frequencies up to 100MHz.
BNX023-01B
Murata Manufacturing's BNX023-01B is a Data Line Filter with 2 functions, 100V rated voltage, and 35dB attenuation at 1000MHz. It has a min insulation resistance of 500 Mohm and operates b/w -40°C to 125°C. Ideal for applications requiring high-frequency noise suppression in data lines.
EMI4192MTTAG
Onsemi
EMI4192MTTAG by Onsemi is a Data Line Filter with 2 functions and 10 terminals. It has a max operating temperature of 85°C, DC resistance of 5 ohm, and output impedance of 50 ohm. Ideal for applications requiring surface mount filters with a capacitance of 1.3 uF in plastic/epoxy packages.
DLP2ADA900HL4L
Murata Manufacturing's DLP2ADA900HL4L is a 5V DATA LINE FILTER with 4 functions and 8 terminals. It offers a min insulation resistance of 100 Mohm, rated current of 0.12A, and max operating temperature of 85°C. Ideal for applications requiring high impedance filtering in compact spaces.
ACM7060-301-2PL-TL01
ACM7060-301-2PL-TL01 by TDK is a Data Line Filter with 2 functions, rated voltage of 80V, and max operating temp of 85°C. It has a min insulation resistance of 10 Mohm and is ideal for surface mount applications requiring output impedance of 300 ohm.
2463-002-X5S0-471M
Tusonix
FEED THROUGH CAPACITOR; Rated Current: 10 A; Manufacturer Series: 2463-002; Diameter (mm): 2.51; Dimensions: D2.51XL3.94 (mm)/D0.099XL0.155 (inch); Mounting Type: THROUGH HOLE MOUNT;
LFBKP2125HS600-T
Taiyo Yuden
LFBKP2125HS600-T by Taiyo Yuden is a FERRITE CHIP data line filter with 1 function and 2 terminals. It has a max operating temperature of 85°C and a min operating temperature of -55°C. This filter is suitable for surface mount applications and has dimensions of L2.0XB1.25XH0.85 (mm).
ACT45B-110-2P-TL003
The TDK ACT45B-110-2P-TL003 is a FERRITE CHIP filter with 2 functions, rated for 50V and 0.25A. With dimensions of L4.5XB3.2XH2.8 (mm), it offers high insulation resistance suitable for data line applications at temperatures ranging from -40 to 150 °C.
BLM31AJ601SN1L
BLM31AJ601SN1L by Murata Manufacturing is a FERRITE CHIP data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter measures L3.2XB1.6XH1.1 (mm) and is commonly used for impedance matching in electronic circuits.
744223
Wurth Elektronik 744223 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 500uH and max DC resistance of 0.15 ohm, it's ideal for applications requiring output impedance of 3300 OHM. This surface mount filter operates b/w -40 to 125 °C, making it suitable for various electronic devices.
SRF0905-471Y
Bourns
Bourns SRF0905-471Y is a Data Line Filter with 2 functions, rated at 50V. Featuring an inductance of 470uH and max DC resistance of 0.14 ohm, it operates b/w -40°C to 105°C. Ideal for applications requiring a surface mount filter with dimensions L9.2xB6.0xH5.0mm, such as data transmission systems or electronic devices needing noise suppression.
DLW43SH101XK2L
DLW43SH101XK2L by Murata Mfg. is a FERRITE CHIP filter with 100uH inductance, 10 Mohm insulation resistance, and 50V rated voltage. It has 2 functions and operates b/w -40 to 125 °C. Ideal for data line filtering applications due to AEC-Q200 screening level compliance.
DLW21SN900HQ2L
DLW21SN900HQ2L by Murata Mfg. is a Data Line Filter with 2 functions, rated at 20V and 0.28A. It offers high insulation resistance of 10 Mohm, ideal for applications requiring noise suppression in data lines within a temperature range of -40 to 85°C.
ACF321825-102-TD01
TDK's ACF321825-102-TD01 is a FERRITE CHIP filter with 25 dB attenuation at 140 MHz. It has a rated voltage of 20 V, 0.15 ohm DC resistance, and dimensions of L3.2XB1.8XH2.5 mm. Ideal for data line filtering applications due to its high insulation resistance and compact surface mount design.
7448262013
Wurth Elektronik 7448262013 Data Line Filter has UL approval, rated voltage of 250V, and inductance of 1300uH. With dimensions L43.5xB23.5xH43.0 (mm), it is ideal for applications requiring a max operating temperature of 125°C and min of -40°C, rated current up to 20A.
BLM21AG471SN1D
BLM21AG471SN1D by Murata Manufacturing is a chip bead data line filter with 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L2.0XB1.25XH0.85 (mm) and is commonly used for surface mount applications in electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NFM18PC105R0J3D
FEED THROUGH CAPACITOR; Rated Current: 4 A; Dimensions: L1.6XB0.8XH0.8 (mm)/L0.063XB0.031XH0.031 (inch); No. of Functions: 1; Minimum Insulation Resistance: 500 Mohm; Mounting Type: SURFACE MOUNT;
NFM18PS105R0J3D
FEED THROUGH CAPACITOR; Rated Current: 2 A; Width (mm): 0.8; Mounting Type: SURFACE MOUNT; No. of Functions: 1; Dimensions: L1.6XB0.8XH0.6 (mm)/L0.063XB0.031XH0.024 (inch);
NFM18PC104R1C3D
Murata Manufacturing's NFM18PC104R1C3D is a data line filter with 1000 Mohm insulation resistance, 16V rated voltage, and 100000 uF capacitance. It is a feed through capacitor used in applications requiring filtering of electrical signals.
NFM18CC222R1C3D
FEED THROUGH CAPACITOR; Maximum DC Resistance: .09 ohm; Rated Current: .7 A; No. of Terminals: 3; No. of Functions: 1; Rated Voltage: 16 V;
NFM18CC223R1C3D
Murata Manufacturing's NFM18CC223R1C3D is a data line filter with 1 function, rated for 16V and 1A. Featuring FEED THROUGH CAPACITOR type, it offers high insulation resistance of 1000 Mohm. Ideal for applications requiring filtering in compact spaces with temperatures ranging from -55 to 125°C.
NFM18CC102R1C3D
Murata Manufacturing's NFM18CC102R1C3D is a data line filter with 1000uF capacitance, 16V rated voltage, and 0.6A rated current. It features FEED THROUGH CAPACITOR type for noise suppression in electronic circuits. Ideal for applications requiring high insulation resistance and operating temperatures from -55 to 125°C.
NFM18CC221R1C3D
FEED THROUGH CAPACITOR; Maximum DC Resistance: .09 ohm; Rated Current: .5 A; Height: .8 mm; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel;
NFM18CC101R1C3D
FEED THROUGH CAPACITOR; Maximum DC Resistance: .09 ohm; Rated Current: .5 A; Minimum Operating Temperature: -55 Cel; No. of Functions: 1; Capacitance: 100 uF;
NFM18CC471R1C3D
Murata Manufacturing's NFM18CC471R1C3D is a data line filter with 470uF capacitance, 16V rated voltage, and 0.5A rated current. It features FEED THROUGH CAPACITOR filter type and is suitable for applications requiring noise suppression in electronic circuits.
NFM18HC105C1C3D
DATA LINE FILTER; Maximum DC Resistance: .02 ohm; Rated Current: 2 A; No. of Functions: 1; JESD-609 Code: e3; Mounting Type: SURFACE MOUNT;
NFM18PC474R0J3D
FEED THROUGH CAPACITOR; Rated Current: 2 A; Length: 1.6 mm; No. of Functions: 1; JESD-609 Code: e3; Additional Features: C-TYPE CIRCUIT;
NFM18PS105D0J3D
FEED THROUGH CAPACITOR; Rated Current: 2 A; Packing Method: TR, 7 INCH; No. of Terminals: 4; No. of Functions: 1; Height: .6 mm;
NFM15PC105R0G3D
FEED THROUGH CAPACITOR; Maximum DC Resistance: .03 ohm; Rated Current: 2 A; Capacitance: 1000000 uF; Packing Method: TR, PAPER, 7 INCH; Terminal Finish: TIN OVER NICKEL;
NFM15PC104D0J3D
FEED THROUGH CAPACITOR; Maximum DC Resistance: .03 ohm; Rated Current: 2 A; Length: 1 mm; No. of Functions: 1; Maximum Operating Temperature: 105 Cel;
NFM15HC435D0E3D
FEED THROUGH CAPACITOR; Maximum DC Resistance: .03 ohm; Rated Current: 2 A; Length: 1 mm; No. of Terminals: 3; Capacitance: 4300000 uF;
NFM15PC435D0E3D
FEED THROUGH CAPACITOR; Maximum DC Resistance: .03 ohm; Rated Current: 2 A; No. of Functions: 1; Mounting Type: SURFACE MOUNT; JESD-609 Code: e3;
NFM18PC225B1A3B
FEED THROUGH CAPACITOR; Rated Current: 4 A; Minimum Insulation Resistance: 200 Mohm; Capacitance: 2200000 uF; Additional Features: C-TYPE CIRCUIT; BAG; No. of Terminals: 3;
NFM15PC104R1A3D
Murata Manufacturing's NFM15PC104R1A3D is a data line filter with 10V rated voltage, 100000uF capacitance, and 2A rated current. It features FEED THROUGH CAPACITOR technology and operates b/w -55 to 85 °C. Ideal for surface mount applications in various electronic devices.
NFM15PC224R1A3D
FEED THROUGH CAPACITOR; Maximum DC Resistance: .03 ohm; Rated Current: 2 A; Rated Voltage: 10 V; No. of Terminals: 3; Additional Features: C-TYPE CIRCUIT;
NFM18PC225B0J3B
FEED THROUGH CAPACITOR; Rated Current: 2 A; Width (mm): 0.8; Dimensions: L1.6XB0.8XH0.6 (mm)/L0.063XB0.031XH0.024 (inch); No. of Terminals: 3; Capacitance: 2200000 uF;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved