Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NFE31PT221D1E9L by Murata Manufacturing is a data line filter with a rated voltage of 25V and a capacitance of 220uF. It has a min insulation resistance of 1000 Mohm and is suitable for surface mount applications.
Median Price
$0.303
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.520
100+ parts
$0.345
1k+ parts
$0.281
10k+ parts
-
Newark
$0.539
$0.339
TTI Europe
$0.139
Verical
$0.208
Future Electronics
$0.415
Chip1Stop
$0.192
$0.170
Distrelec
RS (Exports)
$0.305
Farnell
$0.301
$0.231
$0.219
Element14
$0.470
$0.395
$0.366
Arrow
$0.209
DF Sales Co.
$0.100
Nova Conductors
$0.263
TME
$0.390
$0.250
$0.188
$0.143
Maritex
$0.393
$0.282
$0.163
$0.124
Chip Stock
NAC Semi
$0.217
Vyrian
ACDS - Activité Composants Distribution Service
PC Components Company LLC
Bristol Electronics
IBS Electronics
$0.157
Atlantic Semiconductor
ComSIT Distribution GmbH
Rutronik
$0.130
Ashlea Components Ltd
Mil-Aero Solutions, Inc.
Goldney Electronics S.L.
Speed Components Ltd
Cogito LLC
Semicontronic
$0.118
$0.115
$0.114
Argo Parts USA
$0.255
Aztec Data Supply Inc.
$2.360
Corohmni
$2.869
Eastek
Perfect Parts
GreenTree Electronics
Kepictronics
Authorized Procurement Solutions
Continental Prestige Electronics
$0.254
$0.215
$0.198
Netroflash
$0.258
$0.245
This high insulation resistance ensures reliable performance and minimal interference, making it an excellent choice for data line filtering.
With one function, this data line filter provides efficient filtering for enhanced data transmission and protection against electrical noise.
The 25V rated voltage capability ensures compatibility with various electronic devices, making it suitable for a wide range of applications.
Featuring three terminals, this data line filter enables easy and secure connections for effective filtering and signal integrity.
Specifically designed for filtering data lines, this filter type effectively removes noise and interference, improving overall data transmission quality.
With a maximum temperature rating of 85°C, this data line filter can withstand high operating conditions, ensuring reliable performance even in demanding environments.
The ability to operate in temperatures as low as -40°C makes this filter suitable for use in various climates and environments, offering flexibility and durability.
With a compact width of 1.6mm, this data line filter saves valuable space on circuit boards, making it ideal for applications with limited space.
The small length of 3.2mm contributes to the overall compact size of the filter, allowing for easy integration into electronic devices without sacrificing functionality.
Packaged in tape and reel format, this data line filter is convenient for automated assembly processes, improving manufacturing efficiency.
Designed for surface mount installation, this filter can be easily soldered onto circuit boards, providing a secure and reliable connection.
The compact dimensions of this data line filter enable seamless integration into various electronic devices, ensuring efficient filtering for improved data transmission.
With a rated current of 6A, this data line filter can handle high current loads, making it a reliable choice for demanding applications with heavy power requirements.
The slim height of 1.6mm allows for space-saving installation, ensuring compatibility with compact electronic devices and maintaining a sleek design.
Featuring a capacitance of 220uF, this data line filter effectively suppresses high-frequency noise and stabilizes voltage levels, enhancing signal quality and protecting sensitive components.
Data Line Filters NFE31PT221D1E9L attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Additional Features:
Capacitance:
Filter Type:
Height:
Minimum Insulation Resistance:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
NFE31PT221D1E9L Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
First Components International
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
Itt Semiconductor
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358N
Intersil
FCFBMH4532HM681-T
Taiyo Yuden
Taiyo Yuden's FCFBMH4532HM681-T is a Ferrite Chip Data Line Filter with 2 terminals, rated for 4A current. It offers an output impedance of 680 ohm and operates b/w -40°C to 85°C. Ideal for surface mount applications requiring effective noise filtering in compact spaces.
BLM21AG601SN1D
Murata Manufacturing
Murata Manufacturing's BLM21AG601SN1D is an 0805 chip bead filter with 2 terminals. It operates b/w -55°C to 125°C, offering a DC resistance of 0.21 ohm and output impedance of 600 OHM at frequencies ranging from 100 MHz. Ideal for data line filtering in surface mount applications.
BLM31PG500SN1L
Murata Manufacturing's BLM31PG500SN1L is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L3.2XB1.6XH1.1 (mm), it offers a max frequency of 100 MHz and DC resistance of 0.025 ohm. Ideal for applications requiring a 50 OHM output impedance, this ferrite chip filter is designed for surface mount installation in various electronic devices.
FBMJ3216HS800-TV
FBMJ3216HS800-TV by Taiyo Yuden is a ferrite chip data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -40°C. This surface mount filter has dimensions of L3.2XB1.6XH1.1 (mm) and is suitable for applications requiring an output impedance of 80 ohms and a rated current of 4A.
MI0805J102R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1 A;
NFE61PT102E1H9L
Murata Manufacturing's NFE61PT102E1H9L is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 2A rated current. It has one function and three terminals, suitable for applications requiring noise filtering in data lines. Operating temperature ranges from -40°C to 85°C, making it versatile for various electronic devices.
NFM21CC223R1H3D
Murata Manufacturing's NFM21CC223R1H3D is a data line filter with 1000 Mohm insulation resistance, 50V rated voltage, and 22000 uF capacitance. It is a feed-through capacitor suitable for applications requiring filtering in temperatures ranging from -55 to 125 °C.
NFM3DCC221R1H3L
Murata Manufacturing's NFM3DCC221R1H3L is a data line filter with 220uF capacitance, 50V rated voltage, and 0.3A rated current. It features feed through capacitor type and is ideal for applications requiring noise filtering in electronic circuits.
BNX003-11
Murata Manufacturing's BNX003-11 is a Data Line Filter with 2 functions, rated at 150V and 10A. It offers a max insertion loss of 40 dB, operates b/w -40 to 85°C, and has an output impedance of 50 ohms. Ideal for applications requiring noise suppression in data lines.
BLM21PG331SH1D
BLM21PG331SH1D by Murata is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.09 ohm, output impedance of 330 OHM, and rated current of 1.5 A. Ideal for data line filtering applications at frequencies ranging from 100 MHz with surface mounting type.
742700713
Wuerth Elektronik & Kg
Wurth Elektronik 742700713 is a FERRITE BEAD Data Line Filter with 58 OHM output impedance. Operating temperature ranges from -25 to 125 °C, suitable for STUD MOUNT applications. Compact at D3.5xH5.0 mm, it's ideal for noise suppression in electronic circuits.
ACM9070-701-2PL-TL01
TDK
ACM9070-701-2PL-TL01 by TDK is a FERRITE CHIP data line filter with 2 functions, rated voltage of 80V, and 10 Mohm min insulation resistance. It operates b/w -40 to 85 °C, has 4 terminals, and dimensions of L9.0XB7.0XH4.5 mm. Ideal for applications requiring high impedance filtering in compact spaces.
BL01RN1A1D2B
Murata BL01RN1A1D2B is a Ferrite Bead Data Line Filter with 7A rated current, -40 to 85°C operating temp range. Through-hole mount, D3.6xH5.0mm dimensions make it ideal for noise suppression in electronic circuits.
BLM18AG601SN1B
Murata's BLM18AG601SN1B is a chip bead data line filter with 2 terminals, ideal for surface mount applications. With dimensions of 1.6x0.8x0.8mm, it offers a max DC resistance of 0.38 ohm and operates b/w -55°C to 125°C. This ferrite chip filter has an output impedance of 600 ohm and is rated for a current of 0.5A, making it suitable for noise suppression in circuits up to 100MHz frequency range.
EXC24CE900U
Panasonic
The Panasonic EXC24CE900U is a data line filter with 2 functions and a rated voltage of 5V. It has a max operating temperature of 85°C and is suitable for surface mount applications.
4300-025LF
Tusonix
FEED THROUGH CAPACITOR; Rated Current: 5 A; Terminal Finish: Gold (Au); Mounting Type: THROUGH HOLE MOUNT; Maximum Insertion Loss: 60 dB; Minimum Insulation Resistance: 10000 Mohm;
742792624
The Wurth Elektronik & Kg 742792624 is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter has dimensions of L1.6XB0.8XH0.8 (mm) and is suitable for applications requiring a rated current of 1.5 A and an output impedance of 180 ohm.
DLP11SN900HL2L
Murata Manufacturing's DLP11SN900HL2L is a Data Line Filter with 2 functions, rated at 5V. It has a min insulation resistance of 100 Mohm and operates b/w -40 to 85 °C. Ideal for applications requiring data line filtering with dimensions of L1.25xB1.0xH0.82 mm and output impedance of 90 ohm at 0.15A current rating.
BNX002-11
Murata Manufacturing's BNX002-11 is a 50V rated data line filter with 100 Mohm insulation resistance. With dimensions of L12.0xB11.0xH12.5 (mm), it operates b/w -40 to 85 °C and has an output impedance of 50 OHM. Ideal for applications requiring noise suppression in data lines, this filter has a rated current of 10A and is mounted through hole.
DLW21HN121SQ2L
DLW21HN121SQ2L by Murata is a Data Line Filter with 2 functions and rated voltage of 50V. It has a max operating temperature of 85°C and min insulation resistance of 10 Mohm. This filter is suitable for applications requiring noise suppression in data lines.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NFE31PT222Z1E9L
NFE31PT222Z1E9L by Murata Manufacturing is a data line filter with a rated voltage of 25V and a capacitance of 2200uF. It has a min insulation resistance of 1000 Mohm and is suitable for surface mount applications.
NFE31PT152Z1E9L
Murata Manufacturing's NFE31PT152Z1E9L is a 3-terminal data line filter with 1000 Mohm insulation resistance and 25V rated voltage. With a capacitance of 1500uF, it operates b/w -40 to 85 °C, making it ideal for surface mount applications requiring up to 6A current.
NFE31PT471F1E9L
DATA LINE FILTER; Rated Current: 6 A; Maximum Operating Temperature: 85 Cel; Length: 3.2 mm; No. of Terminals: 3; Width (mm): 1.6;
NFE31PT222Z1E9B
DATA LINE FILTER; Rated Current: 6 A; Width (mm): 1.6; Minimum Operating Temperature: -40 Cel; Capacitance: 2200 uF; Additional Features: T-TYPE CIRCUIT; BUILT-IN FERRITE BEAD;
NFE31PT222Z1E9
DATA LINE FILTER; Rated Current: 6 A; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Additional Features: T-TYPE CIRCUIT;
NFE31PT222Z1E9K
Murata Manufacturing's NFE31PT222Z1E9K is a data line filter with 1000 Mohm min insulation resistance, 25V rated voltage, and 2200uF capacitance. It is used for filtering data lines in applications requiring a max operating temperature of 85°C.
NFE31PT101C1E9L
DATA LINE FILTER; Rated Current: 6 A; Height: 1.6 mm; No. of Functions: 1; Packing Method: TAPE AND REEL; Width (mm): 1.6;
NFE31PT470C1E9L
DATA LINE FILTER; Rated Current: 6 A; No. of Functions: 1; Minimum Insulation Resistance: 1000 Mohm; Terminal Finish: TIN OVER NICKEL; Dimensions: L3.2XB1.6XH1.6 (mm)/L0.126XB0.063XH0.063 (inch);
NFE31PT221D1E9B
Murata Manufacturing's NFE31PT221D1E9B is a 3-terminal data line filter with 1000 Mohm insulation resistance, 25V rated voltage, and 220uF capacitance. It operates b/w -40 to 85 °C and has a max current rating of 6A. Ideal for applications requiring noise filtering in data lines.
NFE31PT101C1E9K
DATA LINE FILTER; Rated Current: 6 A; Minimum Operating Temperature: -40 Cel; Height: 1.6 mm; Mounting Type: SURFACE MOUNT; Minimum Insulation Resistance: 1000 Mohm;
NFE31PT152Z1E9B
DATA LINE FILTER; Rated Current: 6 A; Additional Features: T-TYPE CIRCUIT; BUILT-IN FERRITE BEAD; Packing Method: BULK; No. of Functions: 1; No. of Terminals: 3;
NFE31PT220R1E9B
DATA LINE FILTER; Rated Current: 6 A; Minimum Insulation Resistance: 1000 Mohm; No. of Functions: 1; Rated Voltage: 25 V; Additional Features: T-TYPE CIRCUIT; BUILT-IN FERRITE BEAD;
NFE31PT220R1E9K
DATA LINE FILTER; Rated Current: 6 A; Maximum Operating Temperature: 85 Cel; Capacitance: 22 uF; Minimum Insulation Resistance: 1000 Mohm; Length: 3.2 mm;
NFE31PT220R1E9L
DATA LINE FILTER; Rated Current: 6 A; Length: 3.2 mm; Rated Voltage: 25 V; Width (mm): 1.6; Mounting Type: SURFACE MOUNT;
NFE31PT221D1E9K
DATA LINE FILTER; Rated Current: 6 A; Additional Features: T-TYPE CIRCUIT; BUILT-IN FERRITE BEAD; Height: 1.6 mm; No. of Terminals: 3; No. of Functions: 1;
NFE31PT470C1E9K
DATA LINE FILTER; Rated Current: 6 A; Maximum Operating Temperature: 85 Cel; No. of Functions: 1; Dimensions: L3.2XB1.6XH1.6 (mm)/L0.126XB0.063XH0.063 (inch); Capacitance: 47 uF;
NFE31PT471F1E9B
DATA LINE FILTER; Rated Current: 6 A; Mounting Type: SURFACE MOUNT; Additional Features: T-TYPE CIRCUIT; BUILT-IN FERRITE BEAD; Width (mm): 1.6; Packing Method: BULK;
NFE31PT220R1E9
DATA LINE FILTER; Rated Current: 6 A; Minimum Operating Temperature: -40 Cel; Manufacturer Series: NFE31P; Height: 1.6 mm; Minimum Insulation Resistance: 1000 Mohm;
NFE31PT221D1E9
DATA LINE FILTER; Rated Current: 6 A; No. of Functions: 1; Maximum Operating Temperature: 85 Cel; Minimum Insulation Resistance: 1000 Mohm; Rated Voltage: 25 V;
NFE31PT471F1E9
DATA LINE FILTER; Rated Current: 6 A; Mounting Type: SURFACE MOUNT; Additional Features: T-TYPE CIRCUIT; Width (mm): 1.6; Maximum Operating Temperature: 85 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved