Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LOGIC CIRCUIT;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Kulean Microsystems
SupplyDigital Components
TANS Electronics
Microchip USA
Problanco Electronics
Corphita
UHIMA Technologies
Corohmni
Other Function Logic ICs NL7SZ97MU2TCG attributes and parameters. Explore more Other Function Logic ICs devices from Onsemi
Logic IC Type:
NL7SZ97MU2TCG Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
Rectron
LM358N
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
Diodes Incorporated
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
MC14490FL2
MC14490FL2 by Onsemi is a CMOS logic IC with 16 terminals in a small outline package. Operating temp range -55 to 125 °C, power supplies of 5/15V. Ideal for military applications requiring surface mount technology and dual terminal position.
SN74LS629FN
SN74LS629FN by Texas Instruments is a TTL logic IC with 20 terminals in a square chip carrier package. It operates b/w 0-70°C with supply voltage range of 4.75-5.25V, suitable for commercial applications requiring other function logic circuits.
SN54S124W
SN54S124W by Texas Instruments is a TTL technology IC with 2 functions, operating b/w -55 to 125°C. It has a supply voltage range of 4.5V to 5.5V and comes in a ceramic, metal-sealed co-fired package suitable for military-grade applications. This rectangular flatpack IC is surface mountable and features dual terminals for versatile usage.
SN54S124FK
SN54S124FK by Texas Instruments is a TTL logic IC with 2 functions, operating b/w -55°C to 125°C. It has a supply voltage range of 4.5V to 5.5V and comes in a square chip carrier package suitable for military-grade applications requiring high reliability and performance in harsh environments.
CD74HC299E
Thomson Consumer Electronics
Other Logic ICs;
T74LS183B1
NL7SZ58DBVT1G
NL7SZ58DBVT1G by Onsemi is a CMOS logic IC with 6 terminals, operating b/w -55 to 125 °C. It has a supply voltage range of 1.65V to 5.5V and peak reflow temp of 260°C. Ideal for military-grade applications requiring small outline, thin profile packages in surface-mount technology.
SN74LS297N3
SN74LS297N3 by Texas Instruments is a TTL logic IC with 16 terminals, operating b/w 0-70°C. It has a supply voltage range of 4.75-5.25V and comes in an in-line package shape made of plastic/epoxy material. This IC is commonly used in applications requiring other function logic circuits.
CD74HC165M
General Electric Solid State
CD74HC670M96G4
CD74HC670M96G4 by Texas Instruments is a 16-terminal CMOS logic IC with 3-STATE output, operating b/w -55 to 125°C. It has a supply voltage range of 2V to 6V and is suitable for military-grade applications requiring small outline packaging and surface mount technology.
74LVC1G97W6-7
74LVC1G97W6-7 by Diodes Inc. is a CMOS logic IC with Schmitt Trigger feature, operating at -40 to 125 °C. It has a propagation delay of 7.9 ns at Vsup of 3.3V, suitable for automotive applications due to its small form factor and low power consumption.
SN54LS297W
SN54LS297W by Texas Instruments is a TTL technology logic IC with 16 terminals, operating b/w -55°C to 125°C. It has a supply voltage range of 4.5V to 5.5V and comes in a ceramic-metal sealed co-fired package suitable for military-grade applications. This rectangular flatpack IC is surface-mountable and ideal for various other function logic circuits.
NLV7SZ97DFT2G
NLV7SZ97DFT2G by Onsemi is a CMOS logic IC with 6.3ns propagation delay, suitable for military applications. It operates at 3.3V power supply, has a load capacitance of 50pF, and features Schmitt Trigger technology. The package is small outline with dual terminals and matte tin finish, making it ideal for high-temp environments.
NB7L86AMNG
NB7L86AMNG by Onsemi is a dual-function logic IC with 2 functions, operating at a supply voltage range of 2.375V to 3.465V. It features ECL technology, industrial temperature grade, and comes in a square chip carrier package suitable for surface mount applications.
SN74LS443N1
SN74LS443N1 by Texas Instruments is a TTL logic IC with 20 terminals, operating at 5V. It has a rectangular package made of plastic/epoxy, suitable for commercial-grade applications. With an operating temperature range of 0-70°C, it is commonly used in various other function logic circuits.
THCT2000N3
THCT2000N3 by Texas Instruments is a 28-terminal logic IC in rectangular plastic/epoxy package. It features dual terminal position with 2.54mm pitch, suitable for various applications requiring other function logic ICs.
SN74ALS3674NT
SN55325J
The Texas Instruments SN55325J is a MILITARY-grade BIPOLAR IC with 16 terminals in an IN-LINE package. Operating from -55 to 125 °C, it has dual terminal positions and requires 5-24V power supply. Ideal for applications requiring high reliability and temperature resilience.
CD74HCT123M
CD74HCT164M
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NL7SZ97DFT2G
NL7SZ97DFT2G by Onsemi is a CMOS Schmitt Trigger IC with 7 functions. It operates at a supply voltage range of 1.65V to 5.5V and has a propagation delay of 6.3ns, making it suitable for military-grade applications requiring fast response times in small form factor designs.
NL7SZ57DFT2G
NL7SZ57DFT2G by Onsemi is a CMOS logic IC with 6.3ns propagation delay, operating at 2.3V to 5.5V. It features Schmitt Trigger and has a MILITARY temperature grade, suitable for applications requiring fast response times in harsh environments. The small outline package with dual terminals makes it ideal for compact electronic designs needing high-speed signal processing capabilities.
NL7SZ98DFT2G
LOGIC CIRCUIT; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
NL7SZ58DFT2G
NL7SZ57DBVT1G
LOGIC CIRCUIT; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSOP; Package Shape: RECTANGULAR;
NL7SZ57DFT2G-L22348
LOGIC CIRCUIT; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Nominal Supply Voltage / Vsup (V): 2.3;
NL7SZ98DBVT1G
NL7SZ98DBVT1G by Onsemi is a CMOS logic IC with 6 terminals, Vsup range of 1.65V to 5.5V, and operating temp from -55°C to 125°C. Its small outline package makes it suitable for military-grade applications requiring compact design and high reliability in harsh environments.
NL7SZ57MU1TCG
LOGIC CIRCUIT; Temperature Grade: MILITARY; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: VSON; Package Shape: RECTANGULAR;
NL7SZ57MU3TCG
LOGIC CIRCUIT; Temperature Grade: MILITARY; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: VSON; Package Shape: SQUARE;
NL7SZ58MU1TCG
NL7SZ58MU3TCG
NL7SZ97DBVT1G
NL7SZ97MU1TCG
NL7SZ97MU3TCG
NL7SZ98MU1TCG
NL7SZ98MU3TCG
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved