Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV7357D13R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate. It operates b/w -40 to 150°C, draws 105 mA supply current at 5 V, and has a compact rectangular package suitable for automotive applications.
Median Price
$0.614
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.610
100+ parts
$0.338
1k+ parts
$0.289
10k+ parts
-
Mouser Electronics
$0.339
$0.301
Newark
$0.618
Chip1Stop
$3.890
$1.210
$0.840
Flip Electronics (Authorized)
RS (Exports)
$0.871
$0.736
$0.684
Avnet
$0.269
Farnell
$0.482
$0.452
$0.363
Element14
$0.861
$0.635
$0.627
Digiode
$0.406
Nova Conductors
$0.500
Chip Stock
Cyclops Electronics Ltd
Flip Electronics
Vyrian
NAC Semi
ComSIT Distribution GmbH
Semicontronic
$0.267
$0.260
$0.259
Corphita
$0.384
Ampacity Inc.
$0.410
Corohmni
$0.427
Aranea Global
$0.490
$0.470
Continental Prestige Electronics
$0.499
$0.489
Argo Parts USA
$0.484
Microchip USA
$3.025
Vigor
$3.790
Aztec Data Supply Inc.
$6.700
Advanced Electronics
$18.124
$17.218
RC Electronics
Authorized Procurement Solutions
Perfect Parts
Lixinc
Kepictronics
Formix International (Excess)
Problanco Electronics
GreenTree Electronics
Kulean Microsystems
TANS Electronics
SupplyDigital Components
UHIMA Technologies
PLASTIC/EPOXY - Provides durability and lightweight design for easy installation and handling.
YES - Allows for easy mounting on circuit boards, saving space and simplifying assembly.
AEC-Q100 - Ensures high quality and reliability for automotive applications.
RECTANGULAR - Offers a compact form factor for efficient integration into various devices.
8 - Provides ample connectivity options for versatile networking solutions.
SMALL OUTLINE - Ideal for space-constrained applications while maintaining high performance.
150 °C - Ensures reliable operation even in high temperature environments.
40 °C - Can withstand extreme cold conditions for reliable performance in diverse environments.
MATTE TIN - Provides excellent conductivity and corrosion resistance for long-term use.
DUAL - Allows for flexible PCB layout options to suit specific design requirements.
1.75 mm - Low profile design for compact devices or tight spaces.
3.9 mm - Slim design for efficient use of space in electronic devices.
30 - Ensures proper soldering during assembly for reliable connections.
260 - Withstands high temperatures during manufacturing processes without compromising performance.
4.9 mm - Compact size for easy integration into various electronic systems.
AUTOMOTIVE - Suitable for automotive applications requiring resilience to temperature variations.
GULL WING - Provides secure attachment to PCBs for stable connections.
105 mA - Supports high current demands for efficient data transmission.
CAN FD TRANSCEIVER - Ideal for CAN bus communications in automotive and industrial applications.
5 V - Common voltage requirement for compatibility with a wide range of systems.
1.27 mm - Allows for precise placement on PCBs for reliable connections.
5 Mbps - High-speed data transfer capabilities for efficient networking.
2 - Suitable for environments with moderate humidity levels to prevent damage.
Network Interfaces NCV7357D13R2G attributes and parameters. Explore more Network Interfaces devices from Onsemi
Data Rate:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Screening Level:
Maximum Seated Height:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
NCV7357D13R2G Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - NCV7357x Datasheet 09/Jan/2023
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
261
Deltrol Controls
Other Relays;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Diotec Semiconductor Ag
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MICRODIODE ELECTRONICS SHENZHEN CO LTD
LAN8742A-CZ
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LAN8710AI-EZK
Microchip Technology
LAN8710AI-EZK by Microchip Technology is a 32-terminal Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a 3.3V power supply, square package shape, and matte tin terminal finish. Ideal for network interfaces in industrial applications due to its TS16949 screening level and compact chip carrier design.
14450R-500
Adesto Technologies
Network Interfaces;
VSC8211XVW
Vitesse Semiconductor
ETHERNET TRANSCEIVER; Terminal Form: BALL; No. of Terminals: 117; Package Code: LBGA; Package Shape: RECTANGULAR; Width: 10 mm;
KSZ8864CNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: HVQCCN; Package Shape: SQUARE;
TLE6250GV33NT
TLE6250GV33NT by Infineon is a CAN transceiver with 3.3V supply voltage, BICMOS technology, and 8 terminals in a small outline package. It is used for network interfaces in automotive applications due to its compact size and surface-mount capability.
MC33664ATL1EG
NXP Semiconductors
INTERFACE CIRCUIT; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 40;
DP83848MPTBEP
DP83848MPTBEP by Texas Instruments is an Ethernet transceiver with 100000 Mbps data rate. It operates at -55 to 125 °C, suitable for military-grade applications. The package is a square flatpack with 48 terminals, featuring GULL WING terminal form and 0.5 mm pitch.
DP83867ERGZT
DP83867ERGZT by Texas Instruments is an Ethernet transceiver IC with a data rate of 1 Gbps. It operates in industrial temperature range (-40 to 105°C) and has a no-lead terminal form. The package style is chip carrier with 48 terminals, suitable for network interfaces applications.
MAX3051ESA+
Analog Devices
MAX3051ESA+ by Analog Devices is a BICMOS technology network interface IC with 8 terminals, operating at 3.3V. It has a data rate of 1 Mbps and is ideal for industrial applications requiring small outline packages and surface mount capabilities.
DP83620SQX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: QCCN; Package Shape: SQUARE;
DP83848JSQ/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: QCCN; Package Shape: SQUARE;
ATA6561-GAQW
ATA6561-GAQW by Microchip is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate. It operates at -40 to 150°C, draws 70 mA max supply current, and has a compact rectangular package suitable for automotive applications.
DP83849IVSX/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 80; Package Code: TFQFP; Package Shape: SQUARE;
LAN8740A-EN
LAN8740A-EN by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 0-70°C. Features 32 terminals in a square chip carrier package for surface mount applications. Ideal for telecom equipment requiring TS 16949 screening and commercial temperature grade.
Atmel
ETHERNET TRANSCEIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Seated Height: 1.8 mm;
MCP2542FD-E/MF
MCP2542FD-E/MF by Microchip is a CAN FD transceiver with 8 Mbps data rate, suitable for automotive applications. It operates at -40 to 125°C temperature range and requires 5V nominal voltage. The package style is small outline, heat sink/slug, very thin profile with matte tin terminal finish.
TCAN1051HGDRBTQ1
TCAN1051HGDRBTQ1 by Texas Instruments is a network interface IC with AEC-Q100 screening. It operates b/w -55 to 125 °C, supports data rates up to 5 Mbps, and has a supply current of 180 mA. Ideal for automotive applications due to its MILITARY temperature grade and small outline package style.
UJA1169ATK/X/FZ
UJA1169ATK/X/FZ by NXP Semiconductors is a CAN FD transceiver with 20 terminals, suitable for automotive applications. It operates at a nominal voltage of 13V and supports data rates up to 15 Mbps. This small outline package has a terminal pitch of 0.5mm and can handle a max supply current of 67mA.
TCAN1042HGVDQ1
TCAN1042HGVDQ1 by Texas Instruments is an Ethernet transceiver with a data rate of 5 Mbps. It operates at a max temperature of 125°C and has a small outline package style. This network interface IC is suitable for military applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV7321D12R2G
NCV7321D12R2G by Onsemi is a LIN transceiver with 8 terminals, operating at 12V. It has a data rate of 0.02 Mbps and supports automotive temperature grades (-40 to 125°C). This small outline package is ideal for network interfaces in automotive applications.
NCV7351D13R2G
NCV7351D13R2G by Onsemi is an automotive-grade interface circuit with a 5V supply voltage and 1Mbps data rate. It features a small outline package style, matte tin terminal finish, and dual terminal position. Ideal for network interfaces in automotive applications due to AEC-Q100 screening level.
NCV7342D10R2G
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCV7351D10R2G
NCV7351D10R2G by Onsemi is an AEC-Q100 compliant interface circuit with 8 terminals, operating at 5V. It has a data rate of 1 Mbps and operates in automotive applications. The package style is small outline, with matte tin terminal finish and dual terminal position.
NCV7344AMW0R2G
NCV7344AMW0R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 150°C and has a max supply current of 70 mA. This small outline package with dual terminals measures 3x3 mm and has a very thin profile.
NCV7344D13R2G
NCV7344D13R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 150°C and has a nominal voltage of 5V. This small outline package features gull wing terminals and matte tin finish, making it ideal for network interfaces in automotive systems.
NCV7357D10R2G
NCV7357D10R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at -40 to 150°C temperature range and has a nominal voltage of 5V. With a compact rectangular package style and dual terminal position, it offers high reliability in harsh environments.
NCV7351D1ER2G
NCV7351D1ER2G by Onsemi is an AEC-Q100 compliant interface circuit with 8 terminals, operating at 5V. It offers a data rate of 1 Mbps and is suitable for automotive applications due to its temperature grade and moisture sensitivity level. The package style is small outline, making it ideal for surface mount applications in the automotive industry.
NCV7342D13R2G
NCV7342D13R2G by Onsemi is an AEC-Q100 compliant interface circuit with 8 terminals, operating at 5V. It features a data rate of 1 Mbps and is designed for automotive applications. With a compact rectangular package style and CMOS technology, it offers reliable performance in harsh environments.
NCV7344MW3R2G
CAN FD TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
NCV7344AD13R2G
CAN FD TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCV7344AD10R2G
NCV7344AD10R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 150°C and has a max supply current of 70 mA. This small outline package with gull wing terminals is designed for surface mount assembly.
NCV7356D1R2G
NCV7356D1R2G by Onsemi is an AEC-Q100 compliant network interface IC with 8 terminals, operating at -40 to 125°C. It has a supply voltage range of 5-27V and data rate of 0.1 Mbps, suitable for automotive applications requiring high-temperature tolerance and reliable connectivity in compact designs.
NCV7329D10R2G
LIN TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCV7344AMW3R2G
NCV7344D10R2G
NCV7344D10R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 150°C and has a nominal voltage of 5V. The package style is small outline with gull wing terminals, making it ideal for surface mount designs.
NCV7321MW2R2G
NCV7321MW2R2G by Onsemi is an AEC-Q100 compliant LIN transceiver with 8mA max supply current. Operating from -40 to 125 °C, it supports data rates up to 0.02 Mbps. Ideal for automotive applications requiring a 12V nominal voltage and small outline package style.
NCV7327MW0R2G
LIN TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
NCV7344MW0R2G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved