Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV7342D13R2G by Onsemi is an AEC-Q100 compliant interface circuit with 8 terminals, operating at 5V. It features a data rate of 1 Mbps and is designed for automotive applications. With a compact rectangular package style and CMOS technology, it offers reliable performance in harsh environments.
Median Price
$0.599
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Chip1Stop
1+ parts
100+ parts
$0.467
1k+ parts
$0.432
10k+ parts
$0.423
Mouser Electronics
$0.720
$0.425
$0.378
-
DigiKey
$0.760
$0.428
$0.367
Farnell
$1.270
$0.464
$0.391
Flip Electronics (Authorized)
Arrow
$0.320
Verical
$0.314
Rochester
$0.406
$0.337
$0.300
Master Electronics
$0.439
$0.361
$0.322
Element14
$0.819
$0.615
$0.573
Nova Conductors
$0.498
Digiode
$0.569
Sensible Micro Corp
Chip Stock
Vyrian
Flip Electronics
Tectiva GmbH
Cyclops Electronics Ltd
Semicontronic
$0.379
$0.370
$0.368
Ampacity Inc.
Corohmni
$0.455
Continental Prestige Electronics
$0.488
Argo Parts USA
$0.483
Corphita
$0.539
Vigor
$0.930
Microchip USA
$3.016
Aztec Data Supply Inc.
$11.780
Modulus Dynamics
$13.475
RC Electronics
Lixinc
Kulean Microsystems
Authorized Procurement Solutions
SupplyDigital Components
TANS Electronics
Problanco Electronics
UHIMA Technologies
GreenTree Electronics
Netroflash
$0.489
$0.474
This material is durable and lightweight, making the network interface reliable for long-term use and easy to install.
Surface mount technology allows for easy and efficient installation on PCBs, saving space and reducing assembly time.
AEC-Q100 certification ensures high quality and reliability, making this network interface suitable for automotive applications where robustness is crucial.
Operates on a standard 5V power supply, compatible with most electronic systems.
Withstands high operating temperatures, making it suitable for use in a variety of environments.
Capable of high-speed data transfer, making it ideal for networking applications where speed is important.
Network Interfaces NCV7342D13R2G attributes and parameters. Explore more Network Interfaces devices from Onsemi
Data Rate:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Screening Level:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Technology:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
NCV7342D13R2G Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - NCV7 12/Aug/2016 NCV7342-3 DataSheet Update 7/Dec/2015
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
National Semiconductor
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
Zetex Plc
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
KSZ8794CNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 64; Package Code: HQCCN; Package Shape: SQUARE;
SN65HVD230QDRG4Q1
Texas Instruments
SN65HVD230QDRG4Q1 by Texas Instruments is an AEC-Q100 compliant interface circuit with a data rate of 1 Mbps. Operating at 3.3V, it features a BICMOS technology and is suitable for automotive applications due to its wide temperature range (-40 to 125 °C) and small outline package style.
DP83867IRRGZT
DP83867IRRGZT by Texas Instruments is an Ethernet transceiver with 1.1V supply voltage, 1000000 Mbps data rate, and operates in industrial temperature range. It comes in a square chip carrier package with 48 terminals for surface mount applications. Ideal for high-speed network interfaces requiring reliable performance in harsh environments.
PTCAN1057AVDRQ1
Texas Instruments PTCAN1057AVDRQ1 is an AEC-Q100 compliant CAN FD transceiver with 8 Mbps data rate. Operating temperature range from -40 to 150°C makes it ideal for automotive applications. With a small outline package and gull wing terminals, it offers high reliability in harsh environments.
TCAN1044VDDFRQ1
TCAN1044VDDFRQ1 by Texas Instruments is an AEC-Q100 compliant CAN FD transceiver with 8 Mbps data rate, suitable for automotive applications. It operates at -40 to 125°C, with a supply voltage of 5V and max current of 130mA. The package is small outline, thin profile, with gull wing terminals and nickel palladium gold finish.
TCAN1042HVDR
TCAN1042HVDR by Texas Instruments is an Ethernet transceiver with a data rate of 2 Mbps. It operates in a temperature range from -55 to 125°C, making it suitable for military applications. With a nominal voltage of 5V and max supply current of 180mA, this network interface IC is designed for high-reliability communication systems.
LAN8710A-EZC
Microchip Technology
LAN8710A-EZC by Microchip Technology is a 32-terminal Ethernet transceiver with 100 Mbps data rate. Operating b/w 0-85°C, it's ideal for network interfaces in commercial applications. This square chip carrier has a terminal pitch of 0.5 mm and requires a nominal voltage of 1.2 V.
VSC8514XMK-03
ETHERNET TRANSCEIVER; Terminal Form: BUTT; No. of Terminals: 138; Package Code: HVBCC; Package Shape: SQUARE; JESD-30 Code: S-PBCC-B138;
NCV7342D10R2G
NCV7342D10R2G by Onsemi is a CMOS interface circuit with 8 terminals, operating at 5V. It has a data rate of 1 Mbps and is AEC-Q100 compliant for automotive applications. With a compact small outline package style, it is designed for surface mount assembly in harsh environments.
TJA1043T,118
NXP Semiconductors
NXP Semiconductors' TJA1043T,118 is a CAN transceiver with 5V nominal voltage and 1Mbps data rate. It features 14 terminals in a small outline package for automotive applications. AEC-Q100 screening level ensures reliability in harsh environments.
TCAN1051HGVDR
TCAN1051HGVDR by Texas Instruments is a Network Interface IC with 8 terminals, operating temperature range of -55 to 125°C. It features a data rate of 5 Mbps, suitable for military-grade applications requiring a nominal voltage of 5V and max supply current of 180mA.
KSZ8851SNL-TR
KSZ8851SNL-TR by Microchip: Ethernet transceiver with 32 terminals, CMOS tech, 1.8V supply voltage. Square chip carrier for network interfaces, operates b/w 0-70°C. Ideal for telecom applications requiring a very thin profile and low power consumption.
AR8031-AL1B
Qualcomm
Qualcomm's AR8031-AL1B is an Ethernet transceiver with a data rate of 1000 Mbps. It operates at temperatures ranging from -40 to 85°C, making it suitable for industrial applications. With a terminal pitch of 0.4 mm and no lead terminal form, it offers reliable network connectivity in a compact square package.
TCAN1057AVDRQ1
TCAN1057AVDRQ1 by Texas Instruments is a CAN FD transceiver with 8 Mbps data rate, 130 mA max supply current, and AEC-Q100 screening. It operates b/w -40 to 150 °C and has a small outline package suitable for automotive applications.
DP83867IRRGZR
DP83867IRRGZR by Texas Instruments is an Ethernet transceiver with a data rate of 1Gbps. It operates in industrial temperature range (-40 to 85°C) and has a supply voltage of 1.1V. This network interface chip comes in a square package with 48 terminals, suitable for surface mount applications.
TCAN1042HVDQ1
TCAN1042HVDQ1 by Texas Instruments is an Ethernet transceiver with 2 Mbps data rate, operating at -55 to 125°C. It features a small outline package with 8 terminals and supports a supply voltage of 5V. Ideal for military-grade applications requiring high-temperature resilience and reliable network interfaces.
MCP2542FDT-H/MNY
MCP2542FDT-H/MNY by Microchip is a CAN FD transceiver with 8 Mbps data rate, suitable for automotive applications. It operates at -40 to 150°C, with a supply voltage of 5V and max current of 140mA. The package is small outline, heat sink, very thin profile, with nickel palladium gold finish and dual terminals.
KSZ9131MNXC-TR
KSZ9131MNXC-TR by Microchip is an Ethernet transceiver with a data rate of 1000 Mbps. It operates b/w 0 to 70°C, has a terminal pitch of 0.4 mm, and requires a nominal voltage of 1.2 V. This network interface chip carrier is ideal for commercial applications requiring high-speed Ethernet connectivity in compact designs.
MCP2561-E/P
MCP2561-E/P by Microchip Tech is a CAN transceiver with 1 Mbps data rate, 5V supply voltage, and -40 to 125°C operating temp. Ideal for automotive applications, it has 8 terminals in a rectangular package style suitable for TS16949 screening level.
MAX14882AWE+
Analog Devices
INTERFACE CIRCUIT; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: Matte Tin (Sn) - annealed; JESD-609 Code: e3;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV7321D12R2G
NCV7321D12R2G by Onsemi is a LIN transceiver with 8 terminals, operating at 12V. It has a data rate of 0.02 Mbps and supports automotive temperature grades (-40 to 125°C). This small outline package is ideal for network interfaces in automotive applications.
NCV7351D13R2G
NCV7351D13R2G by Onsemi is an automotive-grade interface circuit with a 5V supply voltage and 1Mbps data rate. It features a small outline package style, matte tin terminal finish, and dual terminal position. Ideal for network interfaces in automotive applications due to AEC-Q100 screening level.
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCV7351D10R2G
NCV7351D10R2G by Onsemi is an AEC-Q100 compliant interface circuit with 8 terminals, operating at 5V. It has a data rate of 1 Mbps and operates in automotive applications. The package style is small outline, with matte tin terminal finish and dual terminal position.
NCV7344AMW0R2G
NCV7344AMW0R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 150°C and has a max supply current of 70 mA. This small outline package with dual terminals measures 3x3 mm and has a very thin profile.
NCV7344D13R2G
NCV7344D13R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 150°C and has a nominal voltage of 5V. This small outline package features gull wing terminals and matte tin finish, making it ideal for network interfaces in automotive systems.
NCV7357D10R2G
NCV7357D10R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at -40 to 150°C temperature range and has a nominal voltage of 5V. With a compact rectangular package style and dual terminal position, it offers high reliability in harsh environments.
NCV7351D1ER2G
NCV7351D1ER2G by Onsemi is an AEC-Q100 compliant interface circuit with 8 terminals, operating at 5V. It offers a data rate of 1 Mbps and is suitable for automotive applications due to its temperature grade and moisture sensitivity level. The package style is small outline, making it ideal for surface mount applications in the automotive industry.
NCV7344MW3R2G
CAN FD TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
NCV7344AD13R2G
CAN FD TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCV7344AD10R2G
NCV7344AD10R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 150°C and has a max supply current of 70 mA. This small outline package with gull wing terminals is designed for surface mount assembly.
NCV7356D1R2G
NCV7356D1R2G by Onsemi is an AEC-Q100 compliant network interface IC with 8 terminals, operating at -40 to 125°C. It has a supply voltage range of 5-27V and data rate of 0.1 Mbps, suitable for automotive applications requiring high-temperature tolerance and reliable connectivity in compact designs.
NCV7357D13R2G
NCV7357D13R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate. It operates b/w -40 to 150°C, draws 105 mA supply current at 5 V, and has a compact rectangular package suitable for automotive applications.
NCV7329D10R2G
LIN TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCV7344AMW3R2G
NCV7344D10R2G
NCV7344D10R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 150°C and has a nominal voltage of 5V. The package style is small outline with gull wing terminals, making it ideal for surface mount designs.
NCV7321MW2R2G
NCV7321MW2R2G by Onsemi is an AEC-Q100 compliant LIN transceiver with 8mA max supply current. Operating from -40 to 125 °C, it supports data rates up to 0.02 Mbps. Ideal for automotive applications requiring a 12V nominal voltage and small outline package style.
NCV7327MW0R2G
LIN TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
NCV7344MW0R2G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved