Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV7329D10R2G by Onsemi is a LIN transceiver with 8 terminals, operating at -40 to 125°C. It has a supply voltage of 12V, data rate of 0.02 Mbps, and low supply current of 6.5mA. Ideal for automotive applications due to AEC-Q100 screening level and compact rectangular package style.
Median Price
$0.516
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Arrow
1+ parts
$0.240
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$0.580
$0.322
$0.274
$0.245
DigiKey
$0.321
Newark
$0.587
Verical
$0.232
Chip1Stop
$0.453
$0.358
$0.335
Element14
$0.828
$0.539
$0.522
Farnell
$0.295
Digiode
$0.737
Chip Stock
Flip Electronics
Vyrian
Cyclops Electronics Ltd
Nova Conductors
Ampacity Inc.
$0.385
Semicontronic
$0.375
$0.373
Corohmni
Corphita
$0.698
Microchip USA
$2.520
Aztec Data Supply Inc.
$16.470
Lixinc
S.R.D Solutions
Problanco Electronics
Kulean Microsystems
Argo Parts USA
Kepictronics
Continental Prestige Electronics
Authorized Procurement Solutions
Futuretech Components
SupplyDigital Components
iodParts Technologies Inc.
TANS Electronics
UHIMA Technologies
Vigor
Bastille Electronics
GreenTree Electronics
Plastic/Epoxy material makes the package durable and resistant to physical damage, ensuring long-term reliability.
The surface mount design allows for easy installation and saves space on the circuit board, making it suitable for compact designs.
Rectangular shape facilitates easy integration into a variety of electronic devices and circuit layouts.
High maximum operating temperature ensures stable performance even in harsh environmental conditions.
CMOS technology offers low power consumption and high noise immunity, making the product efficient and reliable.
With a data rate of 0.02 Mbps, this network interface is suitable for applications that require moderate speed and data transfer capabilities.
Network Interfaces NCV7329D10R2G attributes and parameters. Explore more Network Interfaces devices from Onsemi
Data Rate:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Screening Level:
Maximum Seated Height:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Technology:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
NCV7329D10R2G Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
Semtech
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
BSS84PH6327XTSA2
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
ROHM
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD256DR
SN65HVD256DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps and operates at a nominal voltage of 5V. This automotive-grade IC has a temperature range from -40 to 125°C, making it suitable for network interfaces in harsh environments. With a compact rectangular package style and gull wing terminal form, it is ideal for surface mount applications.
LAN8710AI-EZC-TR
Microchip Technology
LAN8710AI-EZC-TR by Microchip Tech is a Network Interface with 32 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial use. This Ethernet transceiver has a low supply voltage of 1.2V and compact dimensions of 5x5mm for space-constrained applications.
NCN26010XMNTXG
ETHERNET TRANSCEIVER;
PCA82C251TD
NXP Semiconductors
NXP Semiconductors' PCA82C251TD is a CAN transceiver with 5V supply voltage, 78mA max supply current, and -40 to 125°C operating temperature range. Ideal for automotive applications, it features a small outline package with dual terminals and nickel/palladium/gold finish.
TJA1040T/CM,118
NXP Semiconductors' TJA1040T/CM,118 is a CMOS interface circuit with 8 terminals and 1 Mbps data rate. It operates at 5V supply voltage, consuming 0.07 mA current. Ideal for network interfaces in automotive applications due to its small outline package and dual terminal position.
SN65HVD230QDG4
SN65HVD230QDG4 by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate. It operates at 3.3V, suitable for automotive applications. This small outline package has 8 terminals and can withstand temperatures from -40 to 125°C.
MAX3051ESA+TCJN
Analog Devices
INTERFACE CIRCUIT;
TCAN334DCNT
TCAN334DCNT by Texas Instruments is a Network Interface IC with 8 terminals, operating temperature range of -40 to 125°C. It features a small outline package style and supports data rates up to 1 Mbps. Ideal for automotive applications requiring a nominal voltage of 3.3V and interface circuit functionality.
KSZ8795CLXCC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 80; Package Code: LFQFP; Package Shape: SQUARE;
KSZ8081RNBIA-TR
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
MCP251863T-H/SSVAO
CAN FD TRANSCEIVER;
TJA1051T/3/CM,118
NXP Semiconductors' TJA1051T/3/CM,118 is a CAN transceiver with 5V supply voltage and 1Mbps data rate. It features 8 terminals in a small outline package for automotive applications. AEC-Q100 screening level ensures high reliability in harsh environments.
MCP2542FD-H/SN
MCP2542FD-H/SN by Microchip Tech is a CAN FD transceiver with 8 Mbps data rate, suitable for automotive applications. It operates at -40 to 150°C, with 140 mA supply current and 5V nominal voltage. The small outline package has dual terminals and matte tin finish, making it ideal for surface mount designs.
DP83848IVVX/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
TJA1042T/3,118
NXP Semiconductors' TJA1042T/3,118 is a network interface with 8 terminals and 5V supply voltage. It operates at data rates up to 1 Mbps, suitable for automotive applications due to its temperature grade. The IC features a small outline package style, Gull Wing terminal form, and nickel palladium gold silver finish.
KSZ8995MA
LAN SWITCHING CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 128; Package Code: FQFP; Package Shape: RECTANGULAR;
KSZ8895RQXCA
The Microchip Technology KSZ8895RQXCA is an Ethernet switch with 5 transceivers, supporting data rates up to 100 Mbps. It operates at temperatures b/w 0-70°C and has a nominal voltage of 1.2V. This network interface IC comes in a rectangular flatpack package style, suitable for surface mount applications.
LAN8742A-CZ
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
DP83825IRMQR
DP83825IRMQR by Texas Instruments is an Ethernet transceiver with 100000 Mbps data rate. It operates at -40 to 85 °C, suitable for industrial use. The chip carrier package has 24 terminals in a square shape, making it ideal for network interfaces.
SN65HVD232QDG4
SN65HVD232QDG4 by Texas Instruments is a Network Interface IC with 8 terminals, operating at 3.3V. It features a data rate of 1 Mbps and is designed for automotive applications. This small outline package has a temperature range from -40 to 125°C, making it suitable for various industrial environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV7321D12R2G
NCV7321D12R2G by Onsemi is a LIN transceiver with 8 terminals, operating at 12V. It has a data rate of 0.02 Mbps and supports automotive temperature grades (-40 to 125°C). This small outline package is ideal for network interfaces in automotive applications.
NCV7351D13R2G
NCV7351D13R2G by Onsemi is an automotive-grade interface circuit with a 5V supply voltage and 1Mbps data rate. It features a small outline package style, matte tin terminal finish, and dual terminal position. Ideal for network interfaces in automotive applications due to AEC-Q100 screening level.
NCV7342D10R2G
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCV7351D10R2G
NCV7351D10R2G by Onsemi is an AEC-Q100 compliant interface circuit with 8 terminals, operating at 5V. It has a data rate of 1 Mbps and operates in automotive applications. The package style is small outline, with matte tin terminal finish and dual terminal position.
NCV7344AMW0R2G
NCV7344AMW0R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 150°C and has a max supply current of 70 mA. This small outline package with dual terminals measures 3x3 mm and has a very thin profile.
NCV7344D13R2G
NCV7344D13R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 150°C and has a nominal voltage of 5V. This small outline package features gull wing terminals and matte tin finish, making it ideal for network interfaces in automotive systems.
NCV7357D10R2G
NCV7357D10R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at -40 to 150°C temperature range and has a nominal voltage of 5V. With a compact rectangular package style and dual terminal position, it offers high reliability in harsh environments.
NCV7351D1ER2G
NCV7351D1ER2G by Onsemi is an AEC-Q100 compliant interface circuit with 8 terminals, operating at 5V. It offers a data rate of 1 Mbps and is suitable for automotive applications due to its temperature grade and moisture sensitivity level. The package style is small outline, making it ideal for surface mount applications in the automotive industry.
NCV7342D13R2G
NCV7342D13R2G by Onsemi is an AEC-Q100 compliant interface circuit with 8 terminals, operating at 5V. It features a data rate of 1 Mbps and is designed for automotive applications. With a compact rectangular package style and CMOS technology, it offers reliable performance in harsh environments.
NCV7344MW3R2G
CAN FD TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
NCV7344AD13R2G
CAN FD TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCV7344AD10R2G
NCV7344AD10R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 150°C and has a max supply current of 70 mA. This small outline package with gull wing terminals is designed for surface mount assembly.
NCV7356D1R2G
NCV7356D1R2G by Onsemi is an AEC-Q100 compliant network interface IC with 8 terminals, operating at -40 to 125°C. It has a supply voltage range of 5-27V and data rate of 0.1 Mbps, suitable for automotive applications requiring high-temperature tolerance and reliable connectivity in compact designs.
NCV7357D13R2G
NCV7357D13R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate. It operates b/w -40 to 150°C, draws 105 mA supply current at 5 V, and has a compact rectangular package suitable for automotive applications.
NCV7344AMW3R2G
NCV7344D10R2G
NCV7344D10R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 150°C and has a nominal voltage of 5V. The package style is small outline with gull wing terminals, making it ideal for surface mount designs.
NCV7321MW2R2G
NCV7321MW2R2G by Onsemi is an AEC-Q100 compliant LIN transceiver with 8mA max supply current. Operating from -40 to 125 °C, it supports data rates up to 0.02 Mbps. Ideal for automotive applications requiring a 12V nominal voltage and small outline package style.
NCV7327MW0R2G
LIN TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
NCV7344MW0R2G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved