Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV7356D1R2G by Onsemi is an AEC-Q100 compliant network interface IC with 8 terminals, operating at -40 to 125°C. It has a supply voltage range of 5-27V and data rate of 0.1 Mbps, suitable for automotive applications requiring high-temperature tolerance and reliable connectivity in compact designs.
Median Price
$1.558
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$2.470
100+ parts
$1.420
1k+ parts
$1.340
10k+ parts
$1.240
Arrow
$2.638
$1.371
$1.067
-
Chip1Stop
$8.030
$3.350
$2.100
Flip Electronics (Authorized)
Verical
$1.587
$1.413
Rochester
$1.530
$1.270
$1.130
DigiKey
$1.217
Farnell
$1.210
$1.000
Element14
$2.000
$1.740
Newark
$1.470
$1.220
$1.170
Master Electronics
$1.290
$1.180
Digiode
$0.795
Nova Conductors
$1.219
Flip Electronics
Sensible Micro Corp
Chip Stock
Vyrian
Cyclops Electronics Ltd
Rebound Electronics
LIBRA Elektronik GmbH
IBS Electronics
$1.819
$1.720
$1.664
ComSIT Distribution GmbH
Ampacity Inc.
$0.710
Semicontronic
$0.692
$0.689
Corphita
$0.753
Corohmni
$0.900
Argo Parts USA
$1.218
Bastille Electronics
$1.158
$1.100
$1.085
Continental Prestige Electronics
$1.850
$1.250
$0.891
Vigor
Microchip USA
$7.370
$7.324
Aztec Data Supply Inc.
$11.100
Perfect Parts
GreenTree Electronics
Component Connect
RC Electronics
Lixinc
Authorized Procurement Solutions
Futuretech Components
QUARKTWIN TECHNOLOGY LTD
Kulean Microsystems
iodParts Technologies Inc.
ChipstoGo Electronic ltd
TANS Electronics
Kepictronics
Eastek
$1.510
Metaverse IC Inc.
UHIMA Technologies
SupplyDigital Components
Problanco Electronics
Akira Global LLC
The use of plastic/epoxy for the package body material provides a lightweight and durable solution for network interfaces, making it suitable for various applications.
Being surface mountable allows for easy and efficient installation of the network interface onto circuit boards, saving time and facilitating mass production.
Compliance with AEC-Q100 standards ensures that the network interface meets the rigorous requirements for automotive applications, providing high reliability and performance under harsh operating conditions.
With a high maximum operating temperature of 125°C, this network interface can withstand extreme heat, making it suitable for automotive and industrial environments.
The data rate of 0.1 Mbps ensures that the network interface can support low to moderate data transfer speeds, making it ideal for applications that do not require high bandwidth.
Network Interfaces NCV7356D1R2G attributes and parameters. Explore more Network Interfaces devices from Onsemi
Data Rate:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Screening Level:
Maximum Seated Height:
Sub-Category:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
NCV7356D1R2G Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - NCV7356DxR2G Material 16/Aug/2023
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
Microchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
CRG0805F10R
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
EU2B-YS3203F
Idec
ROTARY SWITCH;
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
TCAN1051HVDQ1
Texas Instruments
TCAN1051HVDQ1 by Texas Instruments is a Network Interface with 8 terminals, operating at -55 to 125°C. It features a data rate of 2 Mbps, suitable for military-grade applications requiring a 5V supply voltage and max current of 180mA. The IC's small outline package makes it ideal for telecom interface circuits in harsh environments.
ISO1042BDW
ISO1042BDW by Texas Instruments is a 16-terminal network interface with a small outline package style. It operates b/w -40 to 125°C, suitable for automotive applications. Featuring nickel palladium gold terminal finish, it has a 5V nominal voltage and Gull Wing terminal form.
USB3343-CP
Standard Microsystems
ETHERNET TRANSCEIVER;
KSZ9031MNXCA
KSZ9031MNXCA by Microchip: Ethernet transceiver with 1000 Mbps data rate, operates at 0-70°C. Features 64 terminals in square chip carrier package suitable for network interfaces. Ideal for commercial telecom applications requiring a compact design and low power consumption.
RN2483A-I/RM105
RN2483A-I/RM105 by Microchip is a surface mount Ethernet transceiver with 47 terminals. It operates in industrial temperature range (-40 to 85°C) and requires 3.3V supply voltage. This compact module (17.78mm x 26.67mm) is ideal for network interfaces in various applications.
SN65HVD231QDRQ1
SN65HVD231QDRQ1 by Texas Instruments is a BICMOS technology interface circuit with 1 channel and a data rate of 1 Mbps. It operates at a nominal voltage of 3.3V and is suitable for automotive applications.
AM79C874VD
Advanced Micro Devices
AM79C874VD by Advanced Micro Devices is an Ethernet transceiver with 100 Mbps data rate. It operates at 3.3V, has 80 terminals in a square package, and uses CMOS technology. Suitable for network interfaces, it features a thin profile flatpack design with gull wing terminals for surface mounting applications.
AR8031-AL1B-R
Qualcomm Atheros
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
XISO1042DWVR
INTERFACE CIRCUIT;
TJA1050T
Philips Semiconductors
CAN TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
KSZ9897STXI
Microchip Technology's KSZ9897STXI is an Ethernet transceiver with 128 terminals in a square package. Operating temperature ranges from -40 to 85°C, suitable for industrial use. The terminal finish is matte tin, and it supports surface mount installation.
MAX13054ASA-T
MAX13054ASA-T by Maxim Integrated is a network interface with 8 terminals, operating at -40 to 125°C. It has a supply voltage of 5V, data rate of 1Mbps, and is ideal for automotive applications requiring small outline packages.
LAN9303I-ABZJ
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 56; Package Code: HVQCCN; Package Shape: SQUARE;
KSZ8863RLL-TR
Micrel
LAN SWITCHING CIRCUIT; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
TCAN1042VDRQ1
TCAN1042VDRQ1 by Texas Instruments is an Ethernet transceiver with 2 Mbps data rate. It operates b/w -55 to 125 °C, suitable for military-grade applications. The small outline package has 8 terminals and supports surface mount technology.
KSZ9031RNXIC
DP83869HMRGZT
DP83869HMRGZT by Texas Instruments is an Ethernet transceiver with a data rate of 1 Gbps. It operates in automotive-grade temperatures from -40 to 125°C. The package style is chip carrier, suitable for network interfaces in harsh environments.
LAN8720A-CP-ABC
LAN8720A-CP-ABC by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at 3.3V. It features a terminal pitch of 0.5mm, 24 terminals in a square package style, and operates b/w 0 to 85°C. Ideal for network interfaces in commercial applications requiring high-speed connectivity.
TJA1043TK/1Y
NXP Semiconductors' TJA1043TK/1Y is a network interface IC with 14 terminals, AEC-Q100 screening level, and 5V nominal voltage. It features a small outline package style, gull wing terminal form, and nickel palladium gold silver finish. Ideal for telecom applications requiring high reliability in compact designs.
LAN8830-V/PSA
LAN8830-V/PSA by Microchip is an Ethernet transceiver with 1000 Mbps data rate. It operates b/w -40 to 105 °C, in a square chip carrier package style with 48 terminals. Ideal for network interfaces, it's surface mountable and has a terminal pitch of 0.5 mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV7321D12R2G
NCV7321D12R2G by Onsemi is a LIN transceiver with 8 terminals, operating at 12V. It has a data rate of 0.02 Mbps and supports automotive temperature grades (-40 to 125°C). This small outline package is ideal for network interfaces in automotive applications.
NCV7351D13R2G
NCV7351D13R2G by Onsemi is an automotive-grade interface circuit with a 5V supply voltage and 1Mbps data rate. It features a small outline package style, matte tin terminal finish, and dual terminal position. Ideal for network interfaces in automotive applications due to AEC-Q100 screening level.
NCV7342D10R2G
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCV7351D10R2G
NCV7351D10R2G by Onsemi is an AEC-Q100 compliant interface circuit with 8 terminals, operating at 5V. It has a data rate of 1 Mbps and operates in automotive applications. The package style is small outline, with matte tin terminal finish and dual terminal position.
NCV7344AMW0R2G
NCV7344AMW0R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 150°C and has a max supply current of 70 mA. This small outline package with dual terminals measures 3x3 mm and has a very thin profile.
NCV7344D13R2G
NCV7344D13R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 150°C and has a nominal voltage of 5V. This small outline package features gull wing terminals and matte tin finish, making it ideal for network interfaces in automotive systems.
NCV7357D10R2G
NCV7357D10R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at -40 to 150°C temperature range and has a nominal voltage of 5V. With a compact rectangular package style and dual terminal position, it offers high reliability in harsh environments.
NCV7351D1ER2G
NCV7351D1ER2G by Onsemi is an AEC-Q100 compliant interface circuit with 8 terminals, operating at 5V. It offers a data rate of 1 Mbps and is suitable for automotive applications due to its temperature grade and moisture sensitivity level. The package style is small outline, making it ideal for surface mount applications in the automotive industry.
NCV7342D13R2G
NCV7342D13R2G by Onsemi is an AEC-Q100 compliant interface circuit with 8 terminals, operating at 5V. It features a data rate of 1 Mbps and is designed for automotive applications. With a compact rectangular package style and CMOS technology, it offers reliable performance in harsh environments.
NCV7344MW3R2G
CAN FD TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
NCV7344AD13R2G
CAN FD TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCV7344AD10R2G
NCV7344AD10R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 150°C and has a max supply current of 70 mA. This small outline package with gull wing terminals is designed for surface mount assembly.
NCV7357D13R2G
NCV7357D13R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate. It operates b/w -40 to 150°C, draws 105 mA supply current at 5 V, and has a compact rectangular package suitable for automotive applications.
NCV7329D10R2G
LIN TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCV7344AMW3R2G
NCV7344D10R2G
NCV7344D10R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 150°C and has a nominal voltage of 5V. The package style is small outline with gull wing terminals, making it ideal for surface mount designs.
NCV7321MW2R2G
NCV7321MW2R2G by Onsemi is an AEC-Q100 compliant LIN transceiver with 8mA max supply current. Operating from -40 to 125 °C, it supports data rates up to 0.02 Mbps. Ideal for automotive applications requiring a 12V nominal voltage and small outline package style.
NCV7327MW0R2G
LIN TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
NCV7344MW0R2G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved