Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCV7344MW3R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate. Operating temperature ranges from -40 to 150 °C, suitable for automotive applications. It has a small outline package with 8 terminals and matte tin finish, ideal for network interfaces in automotive systems.
Median Price
$0.730
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.410
1k+ parts
$0.351
10k+ parts
$0.315
DigiKey
$0.409
-
Newark
$0.731
Chip1Stop
$3.730
$1.180
$0.810
Farnell
$0.527
$0.341
$0.278
Element14
$0.537
$0.493
$0.456
Nova Conductors
$0.451
Digiode
$0.929
Flip Electronics
Chip Stock
Vyrian
Rebound Electronics
Semicontronic
$0.367
$0.358
$0.356
Ampacity Inc.
Corohmni
$0.424
Continental Prestige Electronics
$0.442
Argo Parts USA
$0.437
Netroflash
Advanced Electronics
$0.460
Corphita
$0.880
Microchip USA
$2.734
Aztec Data Supply Inc.
$12.410
Authorized Procurement Solutions
Lixinc
Kulean Microsystems
TANS Electronics
SupplyDigital Components
Problanco Electronics
UHIMA Technologies
Robosynatics
Lucentia Tech
$7.153
Surface mount technology allows for easy and efficient assembly onto electronic circuit boards.
AEC-Q100 certification ensures high reliability and performance standards for automotive applications.
Square package shape provides uniformity and compactness for space-constrained designs.
Having 8 terminals allows for connectivity with various components and peripherals in a system.
The small outline, heat sink/slug, and very thin profile package style offers thermal management and space-saving benefits.
High maximum operating temperature ensures reliable performance in demanding environments.
Wide range of minimum operating temperature allows for operation in extreme cold conditions.
Matte tin finish provides corrosion resistance and solderability for secure electrical connections.
Dual terminal position enhances connectivity options and flexibility in circuit board layout.
Low maximum seated height aids in minimizing overall system height and improving airflow.
Compact width dimension enables integration into tight spaces and dense PCB layouts.
Short time at peak reflow temperature reduces thermal stress on components during assembly.
High peak reflow temperature allows for reliable soldering and assembly processes.
Uniform length dimension aids in consistent placement and alignment during assembly.
Specifically designed for automotive applications to meet stringent temperature requirements.
No lead terminal form complies with environmental regulations and provides durability.
High maximum supply current ensures sufficient power for operation in demanding conditions.
CAN FD transceiver type allows for high-speed data communication in automotive and industrial settings.
Standard 5V nominal supply voltage ensures compatibility with common power sources.
Narrow terminal pitch enables compact design and high-density integration on PCBs.
High data rate of 5 Mbps supports fast and efficient communication for various applications.
Network Interfaces NCV7344MW3R2G attributes and parameters. Explore more Network Interfaces devices from Onsemi
Data Rate:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Screening Level:
Maximum Seated Height:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
NCV7344MW3R2G Telecommunications trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Assembly Site 09/Dec/2022
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
Diotec Semiconductor Ag
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
Toshiba
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
CRGCQ0805F10R
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
Infinex
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
DP83865DVH
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 128; Package Code: FQFP; Package Shape: RECTANGULAR;
PCA82C251T/N3
Philips Semiconductors
CAN TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DP83867IRRGZ
Texas Instruments
DP83867IRRGZ by Texas Instruments is an Ethernet transceiver IC with 48 terminals in a square chip carrier package. It operates b/w -40 to 85°C, suitable for industrial use. With a nominal voltage of 1.8V, it's ideal for network interfaces requiring surface mount installation.
SN65HVD234D
SN65HVD234D by Texas Instruments is an automotive-grade network interface IC with a data rate of 1 Mbps. It operates at temperatures ranging from -40 to 125°C and has a nominal voltage of 3.3V. This small-outline package with gull wing terminals is suitable for various interface circuit applications in automotive systems.
TJA1050T/CM,118
NXP Semiconductors
TJA1050T/CM,118 by NXP Semiconductors is a network interface IC with 1 transceiver. It operates at a data rate of 1 Mbps and has a nominal voltage of 5V. This small outline package is commonly used in automotive applications.
WJLXT971ALE.A4
Intel
WJLXT971ALE.A4 by Intel is an Ethernet transceiver with 64 terminals in a square flatpack package. It operates b/w -40 to 85°C, suitable for industrial use. With a nominal voltage of 3.3V and gull wing terminal form, it's ideal for networking applications.
TCAN330DR
TCAN330DR by Texas Instruments is an automotive-grade network interface IC with 1Mbps data rate and 3.3V supply voltage. It features a small outline package, dual terminal position, and nickel palladium gold finish. Ideal for telecom applications requiring reliable interface circuits in harsh environments.
TCAN4550RGYT
TCAN4550RGYT by Texas Instruments is a network interface chip carrier with 20 terminals and a very thin profile. It operates at temperatures ranging from -40 to 125 °C and has a data rate of 5 Mbps. This automotive-grade IC is commonly used in interface circuits for telecom applications.
ADM3050EBRIZ-RL
Analog Devices
ADM3050EBRIZ-RL by Analog Devices is a Network Interface with 8 terminals, operating from -40 to 125°C. It features a small outline package style, Gull Wing terminal form, and supports MIL-STD-1553 data bus transceiver applications in automotive environments.
KSZ8041NL-TR
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
DP83848QSQE/NOPB
DP83848QSQE/NOPB by Texas Instruments is an Ethernet transceiver with 100Mbps data rate, operating at 3.3V. It features a CMOS technology, AEC-Q100 screening level, and industrial temperature grade suitability. The chip carrier package has 40 terminals in a square shape for surface mount applications.
WJLXT971ALE.A4SE001
WJLXT971ALE.A4SE001 by Intel is an Ethernet transceiver with a data rate of 100 Mbps. It operates at temperatures ranging from -40 to 85°C and has a supply voltage of 3.3V, making it suitable for industrial applications requiring high-speed network connectivity. The package style is flatpack, low profile, fine pitch with a terminal pitch of 0.5mm, ideal for compact designs in networking equipment.
VSC8531XMW-02
Microchip Technology
VSC8531XMW-02 by Microchip: Ethernet transceiver with 1000 Mbps data rate, operates b/w 0-125°C. Square chip carrier package with 48 terminals, 0.4 mm pitch. Ideal for network interfaces in telecom applications.
TCAN337GDCNR
TCAN337GDCNR by Texas Instruments is an automotive-grade network interface IC with 8 terminals. It operates at -40 to 125°C, supporting a data rate of 5 Mbps at 3.3V supply voltage. Ideal for telecom applications, it features a small outline package with shrink pitch and gull wing terminal form.
TCAN1051HGDRBTQ1
TCAN1051HGDRBTQ1 by Texas Instruments is a network interface IC with AEC-Q100 screening. It operates b/w -55 to 125 °C, supports data rates up to 5 Mbps, and has a supply current of 180 mA. Ideal for automotive applications due to its MILITARY temperature grade and small outline package style.
KSZ9031MNXCC
KSZ9031MNXCC by Microchip Tech is a 64-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temp range: 0-70°C, voltage supply: 1.2V. Ideal for network interfaces in commercial applications due to its compact square chip carrier package design.
DP83848CVVX/NOPB
DP83848CVVX/NOPB by Texas Instruments is a 4-transceiver Ethernet IC with data rate of 100000 Mbps. It operates at 3.3 V, has quad terminals, and CMOS technology. Suitable for network interfaces, it comes in a square flatpack package with matte tin finish and can withstand temperatures from 0 to 70 °C.
PCA82C251TD
NXP Semiconductors' PCA82C251TD is a CAN transceiver with 5V supply voltage, 78mA max supply current, and -40 to 125°C operating temperature range. Ideal for automotive applications, it features a small outline package with dual terminals and nickel/palladium/gold finish.
KSZ8041FTL
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: TFQFP; Package Shape: SQUARE;
KSZ9031MNXCA
KSZ9031MNXCA by Microchip: Ethernet transceiver with 1000 Mbps data rate, operates at 0-70°C. Features 64 terminals in square chip carrier package suitable for network interfaces. Ideal for commercial telecom applications requiring a compact design and low power consumption.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCV7321D12R2G
NCV7321D12R2G by Onsemi is a LIN transceiver with 8 terminals, operating at 12V. It has a data rate of 0.02 Mbps and supports automotive temperature grades (-40 to 125°C). This small outline package is ideal for network interfaces in automotive applications.
NCV7351D13R2G
NCV7351D13R2G by Onsemi is an automotive-grade interface circuit with a 5V supply voltage and 1Mbps data rate. It features a small outline package style, matte tin terminal finish, and dual terminal position. Ideal for network interfaces in automotive applications due to AEC-Q100 screening level.
NCV7342D10R2G
INTERFACE CIRCUIT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCV7351D10R2G
NCV7351D10R2G by Onsemi is an AEC-Q100 compliant interface circuit with 8 terminals, operating at 5V. It has a data rate of 1 Mbps and operates in automotive applications. The package style is small outline, with matte tin terminal finish and dual terminal position.
NCV7344AMW0R2G
NCV7344AMW0R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 150°C and has a max supply current of 70 mA. This small outline package with dual terminals measures 3x3 mm and has a very thin profile.
NCV7344D13R2G
NCV7344D13R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 150°C and has a nominal voltage of 5V. This small outline package features gull wing terminals and matte tin finish, making it ideal for network interfaces in automotive systems.
NCV7357D10R2G
NCV7357D10R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at -40 to 150°C temperature range and has a nominal voltage of 5V. With a compact rectangular package style and dual terminal position, it offers high reliability in harsh environments.
NCV7351D1ER2G
NCV7351D1ER2G by Onsemi is an AEC-Q100 compliant interface circuit with 8 terminals, operating at 5V. It offers a data rate of 1 Mbps and is suitable for automotive applications due to its temperature grade and moisture sensitivity level. The package style is small outline, making it ideal for surface mount applications in the automotive industry.
NCV7342D13R2G
NCV7342D13R2G by Onsemi is an AEC-Q100 compliant interface circuit with 8 terminals, operating at 5V. It features a data rate of 1 Mbps and is designed for automotive applications. With a compact rectangular package style and CMOS technology, it offers reliable performance in harsh environments.
NCV7344AD13R2G
CAN FD TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCV7344AD10R2G
NCV7344AD10R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 150°C and has a max supply current of 70 mA. This small outline package with gull wing terminals is designed for surface mount assembly.
NCV7356D1R2G
NCV7356D1R2G by Onsemi is an AEC-Q100 compliant network interface IC with 8 terminals, operating at -40 to 125°C. It has a supply voltage range of 5-27V and data rate of 0.1 Mbps, suitable for automotive applications requiring high-temperature tolerance and reliable connectivity in compact designs.
NCV7357D13R2G
NCV7357D13R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate. It operates b/w -40 to 150°C, draws 105 mA supply current at 5 V, and has a compact rectangular package suitable for automotive applications.
NCV7329D10R2G
LIN TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCV7344AMW3R2G
CAN FD TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
NCV7344D10R2G
NCV7344D10R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at temperatures ranging from -40 to 150°C and has a nominal voltage of 5V. The package style is small outline with gull wing terminals, making it ideal for surface mount designs.
NCV7321MW2R2G
NCV7321MW2R2G by Onsemi is an AEC-Q100 compliant LIN transceiver with 8mA max supply current. Operating from -40 to 125 °C, it supports data rates up to 0.02 Mbps. Ideal for automotive applications requiring a 12V nominal voltage and small outline package style.
NCV7327MW0R2G
LIN TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: SQUARE;
NCV7344MW0R2G
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved