Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MCP2561FDT-E/MF by Microchip: CAN FD transceiver, 8 Mbps data rate, 5V supply voltage. Ideal for automotive applications due to TS16949 screening and -40 to 125°C operating temperature range.
Median Price
$1.290
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Element14
1+ parts
$0.885
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$1.071
Mouser Electronics
Microchip Technology
$0.980
$0.940
$0.920
Farnell
$1.310
$1.079
$1.044
Newark
$1.330
$1.110
NAC Semi
$1.260
$1.140
$1.020
Nova Conductors
$1.320
Chip Stock
Vyrian
Semicontronic
$0.750
$0.731
$0.728
Argo Parts USA
Ampacity Inc.
$1.640
Aztec Data Supply Inc.
$7.200
Corohmni
$7.569
Advanced Electronics
$8.268
$7.854
Fulton Briggs Corp.
Lixinc
Continental Prestige Electronics
$0.794
Authorized Procurement Solutions
Bastille Electronics
The use of plastic/epoxy material for the package body makes the product lightweight and durable, perfect for portable or rugged applications.
The surface mount capability allows for easy and efficient installation on circuit boards, saving time and effort during the manufacturing process.
With a high maximum operating temperature of 125°C, this product can withstand harsh environmental conditions and ensure reliable performance in various applications.
The nominal supply voltage of 5V makes it compatible with standard voltage requirements, ensuring seamless integration into existing systems.
With a high data rate of 8 Mbps, this product offers fast and efficient data transfer capabilities, making it ideal for high-speed networking and communication applications.
Network Interfaces MCP2561FDT-E/MF attributes and parameters. Explore more Network Interfaces devices from Microchip Technology
Data Rate:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Screening Level:
Maximum Seated Height:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
MCP2561FDT-E/MF Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8529.90.22.00
SB
8542.39.00.00
PCN Assembly/Origin - Assembly Site 12/Dec/2022
PCN Packaging - Label and Packing Changes 23/Sep/2015 Packing Changes 10/Oct/2016
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Good-ark Electronics
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
Hi-tron Semiconductor
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
TJA1028TK/5V0/20,1
NXP Semiconductors' TJA1028TK/5V0/20,1 is a LIN transceiver with 3.3V supply voltage and 4.5mA max current. It operates b/w -40 to 150°C, suitable for automotive applications meeting AEC-Q100 standards. The small outline package has 8 terminals, 0.65mm pitch, and measures 3x3mm in size.
AT86RF212B-ZUR
AT86RF212B-ZUR by Microchip Technology is a network interface with 32 terminals, operating at temperatures from -40 to 85°C. It has a supply voltage of 3V and terminal pitch of 0.5mm. This telecom IC type chip carrier is ideal for industrial applications requiring low-profile surface mount packages.
AMIS42770ICAW1RG
AMIS42770ICAW1RG by Onsemi is a Network Interface IC with 2 transceivers, operating at 5V. It has a data rate of 1 Mbps and operates in automotive temperature grade. This small outline package with dual terminals is ideal for interface circuit applications.
KSZ8081RNAIA
KSZ8081RNAIA by Microchip Technology is a surface mount Ethernet transceiver with 1 function and 24 terminals. It operates at temperatures ranging from -40 to 85°C and has a data rate of 100 Mbps. This IC is commonly used in network interfaces for industrial applications.
DP83865DVH
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 128; Package Code: FQFP; Package Shape: RECTANGULAR;
TJA1041T/CM,118
NXP Semiconductors' TJA1041T/CM,118 is a Network Interface IC with 14 terminals in a small outline package. It operates at 5V nominal voltage and has a peak reflow temperature of 260°C. Ideal for telecom applications, it features Gull Wing terminal form and dual position.
KSZ8041TL-TR
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: TFQFP; Package Shape: SQUARE;
TJA1041AT/CM,118
NXP Semiconductors' TJA1041AT/CM,118 is a 14-terminal network interface with 5V supply voltage and 1Mbps data rate. It features AEC-Q100 screening level for automotive applications. The IC is designed in CMOS technology, suitable for telecom interface circuits in compact designs.
TLE7250GXUMA1
Infineon Technologies
TLE7250GXUMA1 by Infineon is an AEC-Q100 compliant interface circuit with 8 terminals, 5V supply voltage, and 1.27mm terminal pitch. It is designed for telecom applications requiring small outline package style and dual terminal position for compact designs.
DP83620SQE/NOPB
Texas Instruments DP83620SQE/NOPB is a 48-terminal Ethernet transceiver with data rate of 100000 Mbps. It operates at temperatures from -40 to 85 °C and supports power supplies of 2.5/3.3,3.3 V. Ideal for industrial applications requiring reliable network interfaces in compact square package style.
DP83848IVV
DP83848IVV by Texas Instruments is an Ethernet transceiver with 48 terminals in a square package. It operates at -40 to 85°C, suitable for industrial use. With a supply voltage of 3.3V and CMOS technology, it's ideal for network interfaces in various applications.
SN65HVD234DRG4
SN65HVD234DRG4 by Texas Instruments is a network interface IC with 1 transceiver. It operates at a data rate of 1 Mbps and has a max supply current of 6 mA. This IC is commonly used in automotive applications due to its temperature grade and small package size.
TJA1052IT/2Y
INTERFACE CIRCUIT; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): 260;
DP83826IRHBT
DP83826IRHBT by Texas Instruments is an Ethernet transceiver with 100000 Mbps data rate. It operates at -40 to 85 °C, consuming 53 mA at 3.3 V. Suitable for network interfaces, it comes in a square chip carrier package with 32 terminals and no-lead terminal form.
ISO1042DW
ISO1042DW by Texas Instruments is a network interface with 16 terminals, suitable for automotive applications. It operates b/w -40 to 125°C, with a supply voltage of 5V. The package is small outline, surface mountable, and has a terminal pitch of 1.27mm.
TJA1145AT/FD/0Z
NXP Semiconductors' TJA1145AT/FD/0Z is a CAN transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at 5V nominal voltage and has a max supply current of 65mA. The package style is small outline with gull wing terminal form, making it ideal for surface mount applications.
TCAN1051HGVDRQ1
TCAN1051HGVDRQ1 by Texas Instruments is a network interface IC with 8 terminals, operating temperature range of -55 to 125°C, and data rate of 5 Mbps. It is designed for automotive applications requiring AEC-Q100 screening, featuring small outline package style and Gull Wing terminal form. With a supply voltage of 5V and max supply current of 180mA, it provides reliable interface circuitry in harsh environments.
NCV7342D10R2G
NCV7342D10R2G by Onsemi is a CMOS interface circuit with 8 terminals, operating at 5V. It has a data rate of 1 Mbps and is AEC-Q100 compliant for automotive applications. With a compact small outline package style, it is designed for surface mount assembly in harsh environments.
DP83822HRHBR
DP83822HRHBR by Texas Instruments is an Ethernet transceiver with 4 transceivers, supporting a data rate of 100Gbps. Operating in automotive-grade temperatures (-40 to 125°C), it features a compact chip carrier package with 32 terminals and no-lead terminal form. Suitable for network interfaces, this surface-mount device is ideal for high-speed communication applications.
CR95HF-VMD5T
STMicroelectronics
CR95HF-VMD5T by STMicroelectronics is a network interface chip carrier with 32 terminals, operating at -25 to 85°C. It has a low supply current of 0.0006 mA at 3.3V, suitable for Ethernet transceiver applications due to its small size and surface-mount capability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MCP2551-I/SN
MCP2551-I/SN by Microchip Technology is a CAN transceiver with a data rate of 1 Mbps. It operates at a nominal voltage of 5V and has a max supply current of 75mA. This network interface is commonly used in industrial applications requiring reliable communication.
MCP2551T-I/SN
MCP2551T-I/SN by Microchip: CAN transceiver with 1Mbps data rate, operates at -40 to 85°C. Industrial grade, 5V supply voltage, and 75mA max supply current. Ideal for network interfaces in automotive and industrial applications.
MCP251863T-E/SS
CAN FD TRANSCEIVER;
MCP2562FD-E/SN
MCP2562FD-E/SN by Microchip is a CAN FD transceiver with 8 Mbps data rate, suitable for automotive applications. It operates at -40 to 125°C, with 70 mA supply current and nominal 5V voltage. The small outline package has dual terminals, matte tin finish, and measures 3.9mm x 4.9mm in size.
MCP2551-I/SNVAO
MCP2551-I/SNVAO by Microchip Tech is a CAN transceiver with 1Mbps data rate, 5V supply voltage, and 75mA max supply current. Ideal for industrial applications, it operates b/w -40 to 85°C and features AEC-Q100 screening level for automotive use.
MCP2551-I/SNG
MCP2551-I/SNG by Microchip: CAN transceiver, 1 Mbps data rate, 5V supply voltage. Ideal for industrial applications. Small outline package with dual terminals and matte tin finish.
MCP2551-E/SN
MCP2551-E/SN by Microchip is a CAN transceiver with 5V supply, 1Mbps data rate, and TS16949 screening. It operates in automotive grade temperature range (-40 to 125°C) and has a small outline package for surface mount applications. Ideal for network interfaces in automotive electronics due to its high reliability and compact design.
MCP2562T-E/SN
MCP2562T-E/SN by Microchip: CAN transceiver for automotive apps. Operates at 1 Mbps, 5V supply voltage, and -40 to 125°C temp range. Small outline package with 8 terminals, matte tin finish, and TS16949 screening level.
MCP2562-E/SN
MCP2562-E/SN by Microchip: CAN transceiver for automotive apps. Data rate of 1 Mbps, operates at -40 to 125 °C. Small outline package with 8 terminals, matte tin finish, and nominal voltage of 5 V.
MCP2561-E/SN
MCP2561-E/SN by Microchip Tech is a CAN transceiver with 5V supply, 1Mbps data rate, and 70mA max current. Ideal for automotive applications, it operates b/w -40 to 125°C, in small outline package with dual terminals.
MCP251863T-H/SS
MCP2562T-E/MF
MCP2562T-E/MF by Microchip Tech is a CAN transceiver with 1Mbps data rate, operating at -40 to 125°C. It has 8 terminals, matte tin finish, and small outline package suitable for automotive applications. With a supply voltage of 5V and max current of 70mA, it's ideal for network interfaces in automotive systems.
MCP2562FD-E/MF
MCP2562FD-E/MF by Microchip is a CAN FD transceiver with 8 Mbps data rate, operating at -40 to 125°C. It has 70 mA supply current, suitable for automotive applications due to TS16949 screening and small outline package style.
MCP2562FDT-E/SN
MCP2562FDT-E/SN by Microchip Technology is a CAN FD transceiver with 1 function and a max supply current of 70 mA. It operates at temperatures ranging from -40 to 125 °C and has a data rate of 8 Mbps. This transceiver is commonly used in automotive applications for network interfaces.
MCP2551T-E/SN
MCP2551T-E/SN by Microchip: CAN transceiver, 5V supply, 1Mbps data rate. Automotive grade for network interfaces in vehicles. Small outline package with dual terminals and matte tin finish.
MCP251863T-E/SSVAO
MCP2551-I/P
MCP2551-I/P by Microchip Technology is a CAN transceiver with 5V supply, 1Mbps data rate, and 8 terminals. It operates in industrial temperature range (-40 to 85°C) and has a max supply current of 75mA. Ideal for network interfaces in automotive and industrial applications.
MCP2561T-E/SN
MCP2561T-E/SN by Microchip: CAN transceiver for automotive apps. Operates at 1 Mbps, 5V supply, -40 to 125°C temp range. Small outline package with 8 terminals and matte tin finish.
MCP2562-E/MF
MCP2562-E/MF by Microchip Technology is a CAN transceiver with 1 Mbps data rate and 70 mA max supply current. It is commonly used in automotive applications due to its TS 16949 screening level and automotive temperature grade.
MCP2562FDT-E/MF
MCP2562FDT-E/MF by Microchip is a CAN FD transceiver with 8 Mbps data rate, operating at -40 to 125 °C. It has 8 terminals, matte tin finish, and small outline package suitable for automotive applications. The IC supports a nominal voltage of 5 V with a max supply current of 70 mA.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved