Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MCP2562-E/SN by Microchip: CAN transceiver for automotive apps. Data rate of 1 Mbps, operates at -40 to 125 °C. Small outline package with 8 terminals, matte tin finish, and nominal voltage of 5 V.
Median Price
$1.210
Lifecycle Status
Suppliers In-Stock
28
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.950
100+ parts
$0.775
1k+ parts
$0.774
10k+ parts
$0.772
Farnell
$0.972
$0.728
-
Mouser Electronics
$0.910
DigiKey
Microchip Technology
$0.890
$0.870
Arrow
$1.244
$1.171
Newark
$1.250
$0.937
Element14
$100.460
$75.560
Avnet
Verical
Master Electronics
$0.907
$0.888
$0.879
Future Electronics
$0.905
$0.865
Distrelec
Nova Conductors
$0.982
TME
$1.130
$0.920
Maritex
$1.472
$0.918
$0.745
Chip Stock
Vyrian
IBS Electronics
$1.403
$1.353
$1.269
J2 Sourcing AB
NAC Semi
$4.510
$4.100
Bristol Electronics
ComSIT USA
ComSIT Distribution GmbH
Semi Source
Micros sp.j. W. Kędra i J. Lic
$0.985
$0.953
Greenchips
Diverse Electronics
Ampacity Inc.
$0.720
Semicontronic
$0.702
$0.698
Vigor
Argo Parts USA
$0.974
Continental Prestige Electronics
$1.020
$0.790
Benley Electronics
$1.750
Advanced Electronics
$7.804
$7.414
Microchip USA
$7.865
Modulus Dynamics
$12.649
Corohmni
$13.861
Aztec Data Supply Inc.
$16.360
RC Electronics
Perfect Parts
Lixinc
A-Z Elektronik GmbH
Authorized Procurement Solutions
Marpe Global Electronics
QualityLine Systems
XL Components Corporation
Robosynatics
Lucentia Tech
$16.679
$16.338
Kepictronics
Glotronic Ltd.
GreenTree Electronics
Netroflash
$0.962
$0.933
$0.913
iodParts Technologies Inc.
Eastek
Futuretech Components
The use of plastic/epoxy material results in a lightweight and durable package, making it suitable for various applications.
The surface mount capability allows for easy and efficient installation on PCBs, saving space and simplifying the assembly process.
Meeting TS 16949 screening level ensures high quality and reliability, making it a dependable choice for automotive and industrial applications.
With a high maximum operating temperature of 125°C, this product can withstand harsh environments and extended use without compromising performance.
The matte tin finish provides excellent conductivity and corrosion resistance, ensuring long-term reliability and robust performance.
Being a CAN transceiver, this product is ideal for communication in automotive and industrial systems, offering high data rates and reliable performance.
Network Interfaces MCP2562-E/SN attributes and parameters. Explore more Network Interfaces devices from Microchip Technology
Data Rate:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Screening Level:
Maximum Seated Height:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
MCP2562-E/SN Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - MCP2561/2 Datasheet Update 11/Jul/2014
PCN Packaging - Label and Packing Changes 23/Sep/2015 Packing Changes 10/Oct/2016
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
2N2222A
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
KSZ9031RNXIA
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
Rectron
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
TJA1021T/10/CM,118
NXP Semiconductors
NXP Semiconductors' TJA1021T/10/CM,118 is a LIN transceiver with 8 terminals in a small outline package. It operates b/w -40°C to 150°C, suitable for automotive applications. With AEC-Q100 screening and 12V supply voltage, it's ideal for network interfaces in harsh environments.
TJA1042T,112
NXP Semiconductors' TJA1042T,112 is an automotive-grade network interface IC with 1 Mbps data rate and 5V supply voltage. It features a small outline package with 8 terminals in gull wing form for surface mount applications. Operating b/w -40 to 125°C, it's ideal for automotive communication systems.
MCP2561FD-E/SN
MCP2561FD-E/SN by Microchip: CAN FD transceiver, 8 Mbps data rate, 5V supply voltage. Ideal for automotive applications due to TS 16949 screening level and -40 to 125 °C operating temperature range.
KSZ8895FQXCA
KSZ8895FQXCA by Microchip: Ethernet switch with 5 transceivers, 100 Mbps data rate. Operates at -40 to 85°C. Ideal for network interfaces in commercial applications.
LAN9303I-ABZJ
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 56; Package Code: HVQCCN; Package Shape: SQUARE;
NCV7357D10R2G
Onsemi
NCV7357D10R2G by Onsemi is an AEC-Q100 compliant CAN FD transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at -40 to 150°C temperature range and has a nominal voltage of 5V. With a compact rectangular package style and dual terminal position, it offers high reliability in harsh environments.
KSZ9131RNXV-TRVAO
Microchip Technology's KSZ9131RNXV-TRVAO is an Ethernet transceiver with a data rate of 1000 Mbps. It operates in industrial temperature range (-40 to 105°C) and has AEC-Q100 screening level for automotive applications. The package style is chip carrier with 48 terminals, suitable for surface mount assembly.
LAN8710A-EZC-TR
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
MCP2561T-E/SNVAO
MCP2561T-E/SNVAO by Microchip is an AEC-Q100, TS 16949 certified CAN transceiver with 1Mbps data rate. Operating at -40 to 125°C, it has a supply voltage of 5V and consumes max. 70mA current. Ideal for automotive applications due to its small outline package and dual terminal position.
DP83848HSQ/NOPB
DP83848HSQ/NOPB by Texas Instruments is an Ethernet transceiver with 100000 Mbps data rate. It operates at -40 to 125 °C, suitable for automotive applications. This CMOS technology IC has a terminal pitch of 0.5 mm and comes in a square chip carrier package style.
KSZ8895FQXIA
KSZ8895FQXIA by Microchip: 5 transceivers, 100 Mbps data rate. Ethernet switch with 128 terminals. Industrial grade, operates from -40 to 85°C. Ideal for network interfaces in various applications.
MCP2561FD-E/P
MCP2561FD-E/P by Microchip: CAN FD transceiver for automotive apps. Data rate up to 8 Mbps, operates at -40 to 125°C. Package style: in-line, with 8 terminals and matte tin finish.
KSZ9031RNXCA-TR
Microchip Technology's KSZ9031RNXCA-TR is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. It operates b/w 0-70°C, has a terminal pitch of 0.5mm, and requires a nominal voltage of 1.2V. Ideal for network interfaces in commercial applications due to its compact square chip carrier package style.
MCP2562T-E/SNVAO
MCP2562T-E/SNVAO by Microchip: CAN transceiver for automotive apps. Operates at 1 Mbps data rate, 5V supply voltage, and -40 to 125°C temp range. Small outline package with dual terminals and matte tin finish.
ADIN1300BCPZ
Analog Devices
ADIN1300BCPZ by Analog Devices is an Ethernet transceiver IC with 40 terminals in a square chip carrier package. Operating temperature range from -40 to 85°C, suitable for industrial use. Features include 1.8V supply voltage, 0.5mm terminal pitch, and matte tin finish for surface mount applications.
TCAN330GDCNT
TCAN330GDCNT by Texas Instruments is a network interface IC with 8 terminals, operating from -40 to 125°C. It features a small outline package style, nickel palladium gold finish, and supports data rates up to 5 Mbps. Ideal for automotive applications requiring a 3.3V supply voltage and high-temperature tolerance.
88E1510-A0-NNB2I000
Marvell Technology
Marvell Technology's 88E1510-A0-NNB2I000 is a network interface IC with 48 terminals in a square chip carrier package. It operates at a nominal voltage of 3.3V and serves as an Ethernet transceiver, suitable for telecom applications.
DP83640TVV/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
KSZ8895MQXIA
Microchip Technology's KSZ8895MQXIA is an Ethernet switch with 5 transceivers, supporting data rate of 100 Mbps. It operates in industrial temperature range (-40 to 85 °C) and has a supply voltage of 1.2 V. The package style is flatpack, fine pitch, with 128 terminals for surface mount applications.
DP83620SQ/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: QCCN; Package Shape: SQUARE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MCP2551-I/SN
MCP2551-I/SN by Microchip Technology is a CAN transceiver with a data rate of 1 Mbps. It operates at a nominal voltage of 5V and has a max supply current of 75mA. This network interface is commonly used in industrial applications requiring reliable communication.
MCP2551T-I/SN
MCP2551T-I/SN by Microchip: CAN transceiver with 1Mbps data rate, operates at -40 to 85°C. Industrial grade, 5V supply voltage, and 75mA max supply current. Ideal for network interfaces in automotive and industrial applications.
MCP251863T-E/SS
CAN FD TRANSCEIVER;
MCP2562FD-E/SN
MCP2562FD-E/SN by Microchip is a CAN FD transceiver with 8 Mbps data rate, suitable for automotive applications. It operates at -40 to 125°C, with 70 mA supply current and nominal 5V voltage. The small outline package has dual terminals, matte tin finish, and measures 3.9mm x 4.9mm in size.
MCP2551-I/SNVAO
MCP2551-I/SNVAO by Microchip Tech is a CAN transceiver with 1Mbps data rate, 5V supply voltage, and 75mA max supply current. Ideal for industrial applications, it operates b/w -40 to 85°C and features AEC-Q100 screening level for automotive use.
MCP2551-I/SNG
MCP2551-I/SNG by Microchip: CAN transceiver, 1 Mbps data rate, 5V supply voltage. Ideal for industrial applications. Small outline package with dual terminals and matte tin finish.
MCP2551-E/SN
MCP2551-E/SN by Microchip is a CAN transceiver with 5V supply, 1Mbps data rate, and TS16949 screening. It operates in automotive grade temperature range (-40 to 125°C) and has a small outline package for surface mount applications. Ideal for network interfaces in automotive electronics due to its high reliability and compact design.
MCP2562T-E/SN
MCP2562T-E/SN by Microchip: CAN transceiver for automotive apps. Operates at 1 Mbps, 5V supply voltage, and -40 to 125°C temp range. Small outline package with 8 terminals, matte tin finish, and TS16949 screening level.
MCP2561-E/SN
MCP2561-E/SN by Microchip Tech is a CAN transceiver with 5V supply, 1Mbps data rate, and 70mA max current. Ideal for automotive applications, it operates b/w -40 to 125°C, in small outline package with dual terminals.
MCP251863T-H/SS
MCP2562T-E/MF
MCP2562T-E/MF by Microchip Tech is a CAN transceiver with 1Mbps data rate, operating at -40 to 125°C. It has 8 terminals, matte tin finish, and small outline package suitable for automotive applications. With a supply voltage of 5V and max current of 70mA, it's ideal for network interfaces in automotive systems.
MCP2562FD-E/MF
MCP2562FD-E/MF by Microchip is a CAN FD transceiver with 8 Mbps data rate, operating at -40 to 125°C. It has 70 mA supply current, suitable for automotive applications due to TS16949 screening and small outline package style.
MCP2562FDT-E/SN
MCP2562FDT-E/SN by Microchip Technology is a CAN FD transceiver with 1 function and a max supply current of 70 mA. It operates at temperatures ranging from -40 to 125 °C and has a data rate of 8 Mbps. This transceiver is commonly used in automotive applications for network interfaces.
MCP2551T-E/SN
MCP2551T-E/SN by Microchip: CAN transceiver, 5V supply, 1Mbps data rate. Automotive grade for network interfaces in vehicles. Small outline package with dual terminals and matte tin finish.
MCP251863T-E/SSVAO
MCP2551-I/P
MCP2551-I/P by Microchip Technology is a CAN transceiver with 5V supply, 1Mbps data rate, and 8 terminals. It operates in industrial temperature range (-40 to 85°C) and has a max supply current of 75mA. Ideal for network interfaces in automotive and industrial applications.
MCP2561T-E/SN
MCP2561T-E/SN by Microchip: CAN transceiver for automotive apps. Operates at 1 Mbps, 5V supply, -40 to 125°C temp range. Small outline package with 8 terminals and matte tin finish.
MCP2562-E/MF
MCP2562-E/MF by Microchip Technology is a CAN transceiver with 1 Mbps data rate and 70 mA max supply current. It is commonly used in automotive applications due to its TS 16949 screening level and automotive temperature grade.
MCP2562FDT-E/MF
MCP2562FDT-E/MF by Microchip is a CAN FD transceiver with 8 Mbps data rate, operating at -40 to 125 °C. It has 8 terminals, matte tin finish, and small outline package suitable for automotive applications. The IC supports a nominal voltage of 5 V with a max supply current of 70 mA.
MCP25612FDT-E/SL
MCP25612FDT-E/SL by Microchip Tech: 2 CAN FD transceivers, 8 Mbps data rate, 70 mA max supply current. Automotive grade for network interfaces in automotive applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved