Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MCP2562FD-H/SN by Microchip: CAN FD transceiver, 8 Mbps data rate, 5V supply voltage. Automotive grade for network interfaces in vehicles. Small outline package with dual terminals and matte tin finish.
Median Price
$1.380
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Farnell
1+ parts
$1.080
100+ parts
$0.848
1k+ parts
-
10k+ parts
Microchip Technology
$1.060
$1.020
$1.010
Mouser Electronics
DigiKey
Newark
$1.420
$1.090
Element14
$1.920
$1.850
Master Electronics
$1.050
$0.980
Verical
$1.235
$1.200
Nova Conductors
$1.224
Chip Stock
Vyrian
IBS Electronics
$1.946
$1.889
$1.833
Semicontronic
$0.890
$0.868
$0.863
Ampacity Inc.
Vigor
Continental Prestige Electronics
$1.110
$0.927
Modulus Dynamics
$1.213
$1.201
$1.164
Argo Parts USA
Advanced Electronics
$7.826
$7.435
Aztec Data Supply Inc.
$11.660
Corohmni
$16.245
QUARKTWIN TECHNOLOGY LTD
Lixinc
Fulton Briggs Corp.
Authorized Procurement Solutions
Robosynatics
$7.473
$7.321
Lucentia Tech
The use of plastic/epoxy body material makes the product lightweight and durable, ideal for automotive applications.
Having 8 terminals provides ample connectivity options for various devices, increasing versatility.
The high maximum operating temperature ensures reliability even in extreme conditions.
The matte tin terminal finish offers good conductivity and corrosion resistance, enhancing the product's lifespan.
The high data rate of 8 Mbps allows for fast and efficient data transmission, making this product suitable for applications requiring quick communication.
Network Interfaces MCP2562FD-H/SN attributes and parameters. Explore more Network Interfaces devices from Microchip Technology
Data Rate:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Screening Level:
Maximum Seated Height:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
MCP2562FD-H/SN Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Assembly Site Addition 08/Apr/2015
PCN Packaging - Label and Packing Changes 23/Sep/2015 Packing Changes 10/Oct/2016
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
MBR0540T1G
Onsemi
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
2N2222A
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
Plessey Semiconductors Discrete Components Div
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
Weitronic Enterprise
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LAN8710A-EZK
LAN8710A-EZK by Microchip Tech is a 32-terminal Ethernet transceiver with 100 Mbps data rate. It operates at -40 to 85°C, consuming max 54 mA at 1.2 V. Ideal for network interfaces in commercial applications due to its compact square chip carrier package style.
MAX14882AWE+T
INTERFACE CIRCUIT; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: MATTE TIN;
ISO1042DWR
ISO1042DWR by Texas Instruments is a 16-terminal network interface with a small outline package style. It operates b/w -40 to 125°C, making it suitable for automotive applications. With nickel palladium gold terminal finish and gull wing form, it has a nominal voltage of 5V.
TCAN1042HVDRBRQ1
TCAN1042HVDRBRQ1 by Texas Instruments is an Ethernet transceiver with a data rate of 2 Mbps. It operates b/w -55 to 125 °C, suitable for military applications. With a supply voltage of 5 V and max current of 110 mA, it's ideal for automotive network interfaces.
MC33664ATL1EG
NXP Semiconductors
INTERFACE CIRCUIT; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 40;
KSZ8851SNL-TR
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
PTCAN1057AVDRQ1
Texas Instruments PTCAN1057AVDRQ1 is an AEC-Q100 compliant CAN FD transceiver with 8 Mbps data rate. Operating temperature range from -40 to 150°C makes it ideal for automotive applications. With a small outline package and gull wing terminals, it offers high reliability in harsh environments.
KSZ8851SNL
Microchip Technology's KSZ8851SNL is a Network Interface with 32 terminals in a square chip carrier package. Operating temperature range of 0-70°C, CMOS technology, and Ethernet transceiver type make it ideal for commercial telecom applications. Terminal finish in nickel palladium gold ensures high-quality connectivity.
TJA1050T/N,118
NXP Semiconductors' TJA1050T/N,118 is a CMOS interface circuit with 1 Mbps data rate and 5V nominal voltage. It is designed for automotive applications, featuring a small outline package with 8 terminals and operating temperatures ranging from -40 to 125°C.
TJA1051T/3
NXP Semiconductors' TJA1051T/3 is an AEC-Q100 compliant CAN transceiver with 5 Mbps data rate, suitable for automotive applications. It operates at 5V nominal voltage, drawing a max of 110mA current. The small outline package measures 4.9mm x 3.9mm x 1.75mm and features gull wing terminals for surface mounting.
TJA1028TK/5V0/20/J
NXP Semiconductors' TJA1028TK/5V0/20/J is a LIN transceiver with 3.3V supply voltage, AEC-Q100 screening, and -40 to 150°C operating range. It features a small outline package with 8 terminals for automotive network interfaces. Ideal for applications requiring reliable communication in harsh environments.
DP83TG720SWRHATQ1
Texas Instruments DP83TG720SWRHATQ1 is an Ethernet transceiver with 4 channels, supporting data rates up to 1000 Mbps. Operating in automotive-grade temperatures (-40 to 125°C), it features a low supply current of 225 mA at 1V. This chip carrier package with very thin profile and quad terminals is ideal for network interfaces in automotive applications.
AR8035-AL1A
Qualcomm
Qualcomm's AR8035-AL1A is an Ethernet transceiver with 1000 Mbps data rate, operating at 0-70°C. It features a square chip carrier package style, 48 terminals, and requires 3.3V supply voltage. Ideal for network interfaces in commercial applications due to its compact size and low supply current of 113.7 mA.
TJA1462AT/0Z
NXP Semiconductors' TJA1462AT/0Z is a CAN FD transceiver with 8 Mbps data rate. It operates at a nominal voltage of 5V and has a max supply current of 70mA. This small outline package is suitable for network interfaces in automotive applications.
TCAN1051HGVDQ1
TCAN1051HGVDQ1 by Texas Instruments is a network interface IC with 8 terminals, operating temperature range of -55 to 125°C, and data rate of 5 Mbps. It is designed for telecom applications requiring a supply voltage of 5V, with AEC-Q100 screening level for automotive use. The small outline package style makes it suitable for space-constrained designs in harsh environments.
KSZ8041NL-TR
TJA1043TK/1Y
NXP Semiconductors' TJA1043TK/1Y is a network interface IC with 14 terminals, AEC-Q100 screening level, and 5V nominal voltage. It features a small outline package style, gull wing terminal form, and nickel palladium gold silver finish. Ideal for telecom applications requiring high reliability in compact designs.
ATA6563-GAQW0
ATA6563-GAQW0 by Microchip Tech is a CAN transceiver with 5 Mbps data rate, AEC-Q100 screening, and 8 terminals. Ideal for automotive applications due to its -40 to 150 °C operating temp range and small outline package style. Offers high reliability with TS 16949 certification and gull wing terminal form.
KSZ8041MLL
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
DP83848YB/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MCP2551-I/SN
MCP2551-I/SN by Microchip Technology is a CAN transceiver with a data rate of 1 Mbps. It operates at a nominal voltage of 5V and has a max supply current of 75mA. This network interface is commonly used in industrial applications requiring reliable communication.
MCP2551T-I/SN
MCP2551T-I/SN by Microchip: CAN transceiver with 1Mbps data rate, operates at -40 to 85°C. Industrial grade, 5V supply voltage, and 75mA max supply current. Ideal for network interfaces in automotive and industrial applications.
MCP251863T-E/SS
CAN FD TRANSCEIVER;
MCP2562FD-E/SN
MCP2562FD-E/SN by Microchip is a CAN FD transceiver with 8 Mbps data rate, suitable for automotive applications. It operates at -40 to 125°C, with 70 mA supply current and nominal 5V voltage. The small outline package has dual terminals, matte tin finish, and measures 3.9mm x 4.9mm in size.
MCP2551-I/SNVAO
MCP2551-I/SNVAO by Microchip Tech is a CAN transceiver with 1Mbps data rate, 5V supply voltage, and 75mA max supply current. Ideal for industrial applications, it operates b/w -40 to 85°C and features AEC-Q100 screening level for automotive use.
MCP2551-I/SNG
MCP2551-I/SNG by Microchip: CAN transceiver, 1 Mbps data rate, 5V supply voltage. Ideal for industrial applications. Small outline package with dual terminals and matte tin finish.
MCP2551-E/SN
MCP2551-E/SN by Microchip is a CAN transceiver with 5V supply, 1Mbps data rate, and TS16949 screening. It operates in automotive grade temperature range (-40 to 125°C) and has a small outline package for surface mount applications. Ideal for network interfaces in automotive electronics due to its high reliability and compact design.
MCP2562T-E/SN
MCP2562T-E/SN by Microchip: CAN transceiver for automotive apps. Operates at 1 Mbps, 5V supply voltage, and -40 to 125°C temp range. Small outline package with 8 terminals, matte tin finish, and TS16949 screening level.
MCP2562-E/SN
MCP2562-E/SN by Microchip: CAN transceiver for automotive apps. Data rate of 1 Mbps, operates at -40 to 125 °C. Small outline package with 8 terminals, matte tin finish, and nominal voltage of 5 V.
MCP2561-E/SN
MCP2561-E/SN by Microchip Tech is a CAN transceiver with 5V supply, 1Mbps data rate, and 70mA max current. Ideal for automotive applications, it operates b/w -40 to 125°C, in small outline package with dual terminals.
MCP251863T-H/SS
MCP2562T-E/MF
MCP2562T-E/MF by Microchip Tech is a CAN transceiver with 1Mbps data rate, operating at -40 to 125°C. It has 8 terminals, matte tin finish, and small outline package suitable for automotive applications. With a supply voltage of 5V and max current of 70mA, it's ideal for network interfaces in automotive systems.
MCP2562FD-E/MF
MCP2562FD-E/MF by Microchip is a CAN FD transceiver with 8 Mbps data rate, operating at -40 to 125°C. It has 70 mA supply current, suitable for automotive applications due to TS16949 screening and small outline package style.
MCP2562FDT-E/SN
MCP2562FDT-E/SN by Microchip Technology is a CAN FD transceiver with 1 function and a max supply current of 70 mA. It operates at temperatures ranging from -40 to 125 °C and has a data rate of 8 Mbps. This transceiver is commonly used in automotive applications for network interfaces.
MCP2551T-E/SN
MCP2551T-E/SN by Microchip: CAN transceiver, 5V supply, 1Mbps data rate. Automotive grade for network interfaces in vehicles. Small outline package with dual terminals and matte tin finish.
MCP251863T-E/SSVAO
MCP2551-I/P
MCP2551-I/P by Microchip Technology is a CAN transceiver with 5V supply, 1Mbps data rate, and 8 terminals. It operates in industrial temperature range (-40 to 85°C) and has a max supply current of 75mA. Ideal for network interfaces in automotive and industrial applications.
MCP2561T-E/SN
MCP2561T-E/SN by Microchip: CAN transceiver for automotive apps. Operates at 1 Mbps, 5V supply, -40 to 125°C temp range. Small outline package with 8 terminals and matte tin finish.
MCP2562-E/MF
MCP2562-E/MF by Microchip Technology is a CAN transceiver with 1 Mbps data rate and 70 mA max supply current. It is commonly used in automotive applications due to its TS 16949 screening level and automotive temperature grade.
MCP2562FDT-E/MF
MCP2562FDT-E/MF by Microchip is a CAN FD transceiver with 8 Mbps data rate, operating at -40 to 125 °C. It has 8 terminals, matte tin finish, and small outline package suitable for automotive applications. The IC supports a nominal voltage of 5 V with a max supply current of 70 mA.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved