Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DP83848MPHPEP by Texas Instruments is a 3.3V Ethernet transceiver with data rate of 100000 Mbps. It operates in temperatures from -55 to 125°C, suitable for military-grade applications. The package is a square flatpack with gull wing terminals, ideal for network interfaces requiring high performance in compact spaces.
Median Price
$52.450
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$44.835
100+ parts
$39.853
1k+ parts
$29.304
10k+ parts
-
Arrow
$40.840
$40.010
Chip1Stop
DigiKey
$74.520
$55.190
Mouser Electronics
Digiode
$42.593
Nova Conductors
$45.040
Vyrian
Chip Stock
Bristol Electronics
Semtec, LLC
Parana Technologies
$10.788
$11.268
DigiPath Technology Company
$11.879
$10.928
IDEA Electronic Components Group
$12.121
$11.515
$10.909
ChromeModa Solutions
$9.939
Corohmni
$17.146
Advanced Electronics
$18.453
$17.531
Semicontronic
$38.110
$37.157
$36.967
Corphita
$40.352
Continental Prestige Electronics
$44.139
Netroflash
$42.788
$41.887
Modulus Dynamics
$49.995
$49.495
$47.995
Ampacity Inc.
$82.940
Authorized Procurement Solutions
A-Z Elektronik GmbH
Alle Elektronik GmbH
Lixinc
Argo Parts USA
Kepictronics
Futuretech Components
Robosynatics
Lucentia Tech
$14.155
Provides durability and lightweight design for easy installation.
Allows for easy and secure attachment to circuit boards for efficient connectivity.
Compact shape fits well in tight spaces in electronic devices.
Operates efficiently at low voltage, reducing energy consumption.
High data rate ensures fast and reliable network connectivity.
Network Interfaces DP83848MPHPEP attributes and parameters. Explore more Network Interfaces devices from Texas Instruments
Data Rate:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
No. of Transceivers:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Maximum Seated Height:
Sub-Category:
Nominal Supply Voltage:
Surface Mount:
Technology:
Telecom IC Type:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
DP83848MPHPEP Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
1N4148
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
First Components International
CC0603KRX7R9BB104
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
1N4148WS
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
Diotec Semiconductor Ag
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99-7-F
Multicomp Pro
Changzhou Galaxy Century Microelectronics
1N4148WT
Bytesonic Electronics
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
TJA1040T/N1,118
NXP Semiconductors
NXP Semiconductors' TJA1040T/N1,118 is a CMOS interface circuit with 8 terminals and 5V supply voltage. It operates at 1Mbps data rate, suitable for network interfaces in various applications. The small outline package measures 3.9mm x 4.9mm with a terminal pitch of 1.27mm, making it ideal for compact designs requiring low power consumption.
RTL8211F-CG
Realtek Semiconductor
Realtek RTL8211F-CG is a 40-terminal Ethernet transceiver with a square package shape. Operating b/w 0-70°C, it has a low profile of 0.9mm and terminal pitch of 0.4mm. Ideal for network interfaces in commercial-grade telecom applications.
TLE9250XSJXUMA1
Infineon Technologies
TLE9250XSJXUMA1 by Infineon is an AEC-Q100 compliant interface circuit with 8 terminals, 5V supply voltage, and 1.27mm terminal pitch. It is designed for telecom applications requiring a small outline package with nickel gold palladium finish and gull wing terminal form.
KSZ9031RNXUB-TRVAO
Microchip Technology
Microchip's KSZ9031RNXUB-TRVAO is an Ethernet transceiver with 1000 Mbps data rate, operating from -40 to 85 °C. It features a square chip carrier package with 48 terminals and matte tin finish. Ideal for industrial applications requiring reliable network interfaces in tight spaces.
TJA1043TK/1Y
NXP Semiconductors' TJA1043TK/1Y is a network interface IC with 14 terminals, AEC-Q100 screening level, and 5V nominal voltage. It features a small outline package style, gull wing terminal form, and nickel palladium gold silver finish. Ideal for telecom applications requiring high reliability in compact designs.
KSZ9031RNXCA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
DP83825IRMQT
Texas Instruments DP83825IRMQT is an Ethernet transceiver with a data rate of 100Gbps. It operates in industrial temperature range (-40 to 85°C) and requires a nominal voltage of 3.3V. The chip carrier package style with 24 terminals makes it suitable for network interfaces in various applications.
LAN8710A-EZC
LAN8710A-EZC by Microchip Technology is a 32-terminal Ethernet transceiver with 100 Mbps data rate. Operating b/w 0-85°C, it's ideal for network interfaces in commercial applications. This square chip carrier has a terminal pitch of 0.5 mm and requires a nominal voltage of 1.2 V.
KSZ9131RNXC
Microchip Technology's KSZ9131RNXC is a Network Interface with 48 terminals in a square chip carrier package. It operates at temperatures from 0 to 70°C, supporting data rates up to 1000 Mbps. Ideal for Ethernet transceiver applications due to its low profile and matte tin finish.
SN65HVD233DR
SN65HVD233DR by Texas Instruments is an automotive-grade interface circuit with 1Mbps data rate. It operates at -40 to 125°C, consuming a max of 6mA at 3.3V. The small outline package with gull wing terminals makes it suitable for network interfaces in harsh environments.
PCA82C250T/N4
PCA82C250T/N4 by NXP Semiconductors is an automotive-grade BICMOS technology interface circuit with 8 terminals, operating at 5V. It has a temperature range of -40 to 125°C and peak reflow temp of 260°C. Ideal for network interfaces in automotive applications due to its small outline package and dual terminal position.
ISO1044BDR
ISO1044BDR by Texas Instruments is a Network Interface with 8 terminals in a small outline package. It operates b/w -40 to 125°C, suitable for automotive applications. Features include 1.8V supply voltage, 70mA max supply current, and Gull Wing terminal form.
TJA1042T/3/CM,118
NXP Semiconductors' TJA1042T/3/CM,118 is a network interface with 8 terminals and 5V supply voltage. It operates at 1Mbps data rate, suitable for interface circuits in automotive applications. The small outline package with matte tin finish and gull wing terminals makes it ideal for surface mount designs.
DP83848HSQ/NOPB
DP83848HSQ/NOPB by Texas Instruments is an Ethernet transceiver with 100000 Mbps data rate. It operates at -40 to 125 °C, suitable for automotive applications. This CMOS technology IC has a terminal pitch of 0.5 mm and comes in a square chip carrier package style.
LAN8742I-CZ-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
TJA1057GT/3J
NXP Semiconductors' TJA1057GT/3J is an AEC-Q100 compliant interface circuit with 8 terminals in a small outline package. It operates at a nominal voltage of 5V, with peak reflow temperature of 260°C for up to 30 seconds. Ideal for automotive applications requiring reliable network interfaces.
KSZ8041NL-TR
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
MCP2562FD-E/MFVAO
MCP2562FD-E/MFVAO by Microchip: AEC-Q100, TS 16949 compliant CAN FD transceiver. Operates at 8 Mbps with 70 mA supply current. Ideal for automotive network interfaces due to -40 to 125 °C temp range and small outline package style.
MAX3051ESA+T
Analog Devices
Analog Devices' MAX3051ESA+T is a BICMOS technology network interface IC with 8 terminals, operating at 3.3V. It offers a data rate of 1 Mbps and is ideal for industrial applications requiring interface circuitry in small outline packages.
MCP2562FD-H/SN
MCP2562FD-H/SN by Microchip: CAN FD transceiver, 8 Mbps data rate, 5V supply voltage. Automotive grade for network interfaces in vehicles. Small outline package with dual terminals and matte tin finish.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
DP83867IRPAPR
DP83867IRPAPR by Texas Instruments is an Ethernet transceiver with 8 transceivers, supporting data rate of 1000000 Mbps. It operates in industrial temperature range (-40 to 85 °C) and has a package style of flatpack with gull wing terminals. Ideal for network interfaces requiring high-speed connectivity in harsh environments.
DP83822IRHBR
DP83822IRHBR by Texas Instruments is an Ethernet transceiver with 4 transceivers, supporting data rate of 100000 Mbps. It operates in industrial temperature range (-40 to 85 °C) and has a supply voltage of 1.8 V. Suitable for network interfaces, it comes in a square chip carrier package with 32 terminals and surface mount capability.
DP83848CVVX/NOPB
DP83848CVVX/NOPB by Texas Instruments is a 4-transceiver Ethernet IC with data rate of 100000 Mbps. It operates at 3.3 V, has quad terminals, and CMOS technology. Suitable for network interfaces, it comes in a square flatpack package with matte tin finish and can withstand temperatures from 0 to 70 °C.
DP83848IVV/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
DP83848IVV/NOPB by Texas Instruments is a 3.3V Ethernet transceiver with data rate of 100000 Mbps. It features a flatpack, low profile package style and operates in industrial temperature range (-40 to 85 °C). Ideal for network interfaces, it has 48 terminals and is surface mountable.
DP83867ERGZT
DP83867ERGZT by Texas Instruments is an Ethernet transceiver IC with a data rate of 1 Gbps. It operates in industrial temperature range (-40 to 105°C) and has a no-lead terminal form. The package style is chip carrier with 48 terminals, suitable for network interfaces applications.
DP83848CVV/NOPB
DP83848CVV/NOPB by Texas Instruments is a 3.3V Ethernet transceiver with 100000 Mbps data rate. It features a quad terminal position, matte tin finish, and operates b/w 0-70°C. Ideal for network interfaces in commercial applications due to its compact flatpack design and fine pitch terminals.
ETHERNET TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
DP83867IRRGZR
DP83867IRRGZR by Texas Instruments is an Ethernet transceiver with a data rate of 1Gbps. It operates in industrial temperature range (-40 to 85°C) and has a supply voltage of 1.1V. This network interface chip comes in a square package with 48 terminals, suitable for surface mount applications.
DP83867ERGZR
DP83867ERGZR by Texas Instruments is an Ethernet transceiver IC with 1V supply voltage, supporting data rate of 1000000 Mbps. It operates in industrial temperature range (-40 to 105 °C) and comes in a square chip carrier package with 48 terminals for surface mount applications.
DP83867ISRGZR
DP83867ISRGZR by Texas Instruments is an Ethernet transceiver with 1V supply voltage and 1000000 Mbps data rate. It operates in industrial temperature range (-40 to 85 °C) and comes in a square chip carrier package with 48 terminals for surface mount applications.
DP83867IRRGZT
DP83867IRRGZT by Texas Instruments is an Ethernet transceiver with 1.1V supply voltage, 1000000 Mbps data rate, and operates in industrial temperature range. It comes in a square chip carrier package with 48 terminals for surface mount applications. Ideal for high-speed network interfaces requiring reliable performance in harsh environments.
DP83867ISRGZT
DP83867ISRGZT by Texas Instruments is an Ethernet transceiver with a data rate of 1Gbps. It operates in industrial temperature range (-40 to 85°C) and has a terminal pitch of 0.5mm. This network interface IC comes in a square chip carrier package suitable for surface mount applications.
DP83867IRPAPT
DP83867IRPAPT by Texas Instruments is a Network Interface with 4 transceivers, supporting data rate of 1Gbps. It operates in industrial temperature range (-40 to 85°C) and has a low supply current of 73mA. Ideal for Ethernet applications requiring high-speed connectivity in compact spaces.
DP83848IVVX
DP83848IVVX by Texas Instruments is an Ethernet transceiver with 48 terminals in a square package. Operating temperature ranges from -40 to 85°C, suitable for industrial use. It features CMOS technology, GULL WING terminal form, and requires a nominal voltage of 3.3V.
DP83640TVV/NOPB
DP83640TVV/NOPB by Texas Instruments is an Ethernet transceiver with 100000 Mbps data rate. It operates at 3.3 V, has 48 terminals in a square package, and supports surface mount technology. Ideal for industrial applications requiring reliable network interfaces in a compact form factor.
DP83867CSRGZT
DP83867CSRGZT by Texas Instruments is an Ethernet transceiver with 1V supply voltage, supporting data rate of 1000000 Mbps. It operates b/w 0-70°C, in a square chip carrier package style with 48 terminals. Ideal for network interfaces, it features nickel palladium gold terminal finish and very thin profile design.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved