Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NXP Semiconductors' TJA1043TK/1Y is a network interface IC with 14 terminals, AEC-Q100 screening level, and 5V nominal voltage. It features a small outline package style, gull wing terminal form, and nickel palladium gold silver finish. Ideal for telecom applications requiring high reliability in compact designs.
Median Price
$1.330
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Newark
1+ parts
$0.757
100+ parts
1k+ parts
-
10k+ parts
Chip1Stop
$1.000
$0.975
$0.916
$0.802
Mouser Electronics
$2.170
$1.320
$1.200
$1.100
DigiKey
$2.560
$1.560
$1.437
Element14
$3.070
$2.220
$1.510
$1.410
Avnet
EBV Elektronik
Arrow
$1.123
Verical
$1.127
Elektronika Sales Private Limited
Rochester
$0.984
Farnell
$10.480
$7.140
$6.800
Digiode
$0.889
Nova Conductors
$1.288
Maritex
$1.810
$1.004
$0.820
Tomark Electronics Ltd
$4.720
Chip Stock
Vyrian
NexGen Digital
Sensible Micro Corp
Anansix
Velocity Electronics
ComSIT Distribution GmbH
Semicontronic
$0.640
$0.624
$0.621
Corphita
$0.842
Argo Parts USA
$1.265
Modulus Dynamics
$1.455
Corohmni
Advanced Electronics
$1.499
$1.424
Ampacity Inc.
$1.680
Continental Prestige Electronics
$2.090
$1.370
$0.930
Microchip USA
$6.748
Aztec Data Supply Inc.
$9.090
Perfect Parts
Infinite Electronics LLP (Excess)
GreenTree Electronics
A-Z Elektronik GmbH
UNI Independent Distributors
Lixinc
Component Connect
iodParts Technologies Inc.
Futuretech Components
Robosynatics
$1.426
$1.397
Lucentia Tech
Authorized Procurement Solutions
Netroflash
$1.263
$1.224
$1.198
Plastic/Epoxy material provides durability and flexibility, making the product resistant to wear and tear.
Surface mount technology allows for easy and secure installation on circuit boards, saving space and simplifying the manufacturing process.
AEC-Q100 screening ensures high quality and reliability, making the product suitable for automotive applications where ruggedness is required.
Dual terminal position allows for more stable connections, reducing the risk of signal loss or interference.
Low seated height enables the product to fit in compact spaces while maintaining high performance.
5 V nominal supply voltage ensures compatibility with standard power sources, simplifying integration into existing systems.
Network Interfaces TJA1043TK/1Y attributes and parameters. Explore more Network Interfaces devices from NXP Semiconductors
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Screening Level:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Telecom IC Type:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
TJA1043TK/1Y Telecommunications trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Packaging - Mult Dev Pkg Seal 15/Dec/2020 All Dev Label Update 15/Dec/2020
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
MBRS3200T3G
Onsemi
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
LM358N
Motorola
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
2N7002-7-F
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
MAX3051EKA+T
Analog Devices
Analog Devices' MAX3051EKA+T is a BICMOS technology network interface IC with 8 terminals, operating at 3.3V. It offers a data rate of 1 Mbps and is ideal for industrial applications requiring low profile, small outline packages in telecom interface circuits.
TLE9255WLCXUMA1
Infineon Technologies
TLE9255WLCXUMA1 by Infineon Technologies is a network interface IC with 14 terminals, AEC-Q100 screening level, and 5V nominal voltage. It is designed for automotive applications requiring a small outline package with surface mount capability and dual terminal position.
TCAN1042HVDQ1
TCAN1042HVDQ1 by Texas Instruments is an Ethernet transceiver with 2 Mbps data rate, operating at -55 to 125°C. It features a small outline package with 8 terminals and supports a supply voltage of 5V. Ideal for military-grade applications requiring high-temperature resilience and reliable network interfaces.
DP83848QSQE/NOPB
DP83848QSQE/NOPB by Texas Instruments is an Ethernet transceiver with 100Mbps data rate, operating at 3.3V. It features a CMOS technology, AEC-Q100 screening level, and industrial temperature grade suitability. The chip carrier package has 40 terminals in a square shape for surface mount applications.
TCAN330GDCNR
TCAN330GDCNR by Texas Instruments is a Network Interface IC with 8 terminals, operating temperature range of -40 to 125°C, and data rate of 5 Mbps. It is designed for automotive applications requiring a small outline package with low profile and shrink pitch.
MCP2551-I/SNG
Microchip Technology
MCP2551-I/SNG by Microchip: CAN transceiver, 1 Mbps data rate, 5V supply voltage. Ideal for industrial applications. Small outline package with dual terminals and matte tin finish.
KSZ8081RNBIA-G3XX-TR
Microchip's KSZ8081RNBIA-G3XX-TR is a 32-terminal Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85°C. It features a 3.3V supply voltage, TS16949 screening level, and square chip carrier package style. Ideal for industrial applications requiring reliable network interfaces in compact spaces.
Maxim Integrated
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSSOP; Package Shape: RECTANGULAR;
KSZ9031RNXUB-TRVAO
Microchip's KSZ9031RNXUB-TRVAO is an Ethernet transceiver with 1000 Mbps data rate, operating from -40 to 85 °C. It features a square chip carrier package with 48 terminals and matte tin finish. Ideal for industrial applications requiring reliable network interfaces in tight spaces.
KSZ9031RNXCC-TR
The Microchip Technology KSZ9031RNXCC-TR is a 48-terminal Ethernet transceiver with a data rate of 1000 Mbps. It operates b/w 0 to 70°C, suitable for commercial applications. This surface-mount chip carrier has a very thin profile and matte tin finish, ideal for network interfaces in compact devices.
KSZ9021RNI
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
TJA1027T/20,118
NXP Semiconductors
NXP Semiconductors' TJA1027T/20,118 is an AEC-Q100 compliant interface circuit with 8 terminals in a small outline package. It operates at a nominal voltage of 12V and has a peak reflow temperature of 260°C. Ideal for automotive applications requiring reliable network interfaces in compact designs.
KSZ9131RNXI
The Microchip Technology KSZ9131RNXI is an Ethernet transceiver with a data rate of 1000 Mbps. It operates in industrial temperature range from -40 to 85°C and has a supply voltage of 1.2V. This network interface chip comes in a square chip carrier package with 48 terminals, suitable for surface mount applications.
TCAN332D
TCAN332D by Texas Instruments is an automotive-grade network interface IC with 1Mbps data rate. It operates b/w -40 to 125°C, suitable for harsh environments. With a small outline package and gull wing terminals, it's ideal for telecom interface circuits.
KSZ8721BL
Microchip Technology's KSZ8721BL is a 48-terminal Ethernet transceiver with 100 Mbps data rate. It operates b/w 0-70°C, suitable for commercial applications. The IC features CMOS technology, matte tin finish, and low-profile flatpack package ideal for network interfaces.
DP83620SQE/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: QCCN; Package Shape: SQUARE;
KSZ9131RNXU-TRVAO
KSZ9131RNXU-TRVAO by Microchip: Ethernet transceiver with 1000 Mbps data rate, operates at -40 to 85 °C. Industrial grade, AEC-Q100 screening level for automotive applications. Package style: chip carrier, heat sink/slug, very thin profile.
ADM3055EBRIZ-RL
ADM3055EBRIZ-RL by Analog Devices is a network interface IC with 20 terminals, operating b/w -40 to 105°C. It has a supply current of 260mA at 5V and Gull Wing terminal form. Ideal for industrial applications requiring Interface Circuit Telecom ICs in compact SMD packages.
TCAN332GD
TCAN332GD by Texas Instruments is an automotive-grade network interface IC with 8 terminals, operating from -40 to 125°C. It supports a data rate of 5 Mbps at a supply voltage of 3.3 V, making it ideal for telecom applications requiring high-speed interface circuits.
ADM3058EBRIZ-RL
ADM3058EBRIZ-RL by Analog Devices is a CAN FD transceiver with 12 Mbps data rate, operating at -40 to 125°C. It features Gull Wing terminals, 5V supply voltage, and small outline package suitable for automotive applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TJA1051TK/3,118
NXP Semiconductors' TJA1051TK/3,118 is a CAN transceiver with 5V supply voltage and 1Mbps data rate. It features AEC-Q100 screening level for automotive applications. This small outline package has 8 terminals, 0.65mm pitch, and operates at peak reflow temperature of 260°C.
TJA1042T/3,118
NXP Semiconductors' TJA1042T/3,118 is a network interface with 8 terminals and 5V supply voltage. It operates at data rates up to 1 Mbps, suitable for automotive applications due to its temperature grade. The IC features a small outline package style, Gull Wing terminal form, and nickel palladium gold silver finish.
TJA1042TK/3/1J
NXP Semiconductors' TJA1042TK/3/1J is a CAN transceiver with 5 Mbps data rate, AEC-Q100 screening level, and 8 terminals. It operates b/w -40 to 150°C, has a supply voltage of 5V, and consumes only 0.07 mA. Ideal for automotive applications due to its small outline package style and dual terminal position.
TJA1051T/3/1J
NXP Semiconductors' TJA1051T/3/1J is a CAN transceiver with 8 terminals, operating at 5V and 1Mbps data rate. It has a temperature range of -40 to 125°C, suitable for automotive applications. The small outline package measures 4.9mm x 3.9mm x 1.75mm and supports surface mount assembly.
TJA1051T/3,118
NXP Semiconductors' TJA1051T/3,118 is a CAN transceiver with 5V supply voltage and 1Mbps data rate. It operates in automotive grade temperatures (-40 to 125°C) and has AEC-Q100 screening level for reliability. With a small outline package style, it's ideal for automotive network interfaces.
TJA1051TK/3/1J
NXP's TJA1051TK/3/1J is an AEC-Q100 compliant CAN transceiver with 5 Mbps data rate, operating at 5V. It features a small outline package with 8 terminals and peak reflow temp of 260°C. Ideal for automotive applications requiring high-speed network interfaces in compact spaces.
TJA1050T/CM,118
TJA1050T/CM,118 by NXP Semiconductors is a network interface IC with 1 transceiver. It operates at a data rate of 1 Mbps and has a nominal voltage of 5V. This small outline package is commonly used in automotive applications.
TJA1042TK/3,118
NXP Semiconductors' TJA1042TK/3,118 is an AEC-Q100 compliant network interface with 8 terminals and 5V supply voltage. Operating b/w -40 to 125 °C, it supports data rates up to 1 Mbps. Ideal for automotive applications requiring a compact, low-power interface circuit.
TJA1043T,118
NXP Semiconductors' TJA1043T,118 is a CAN transceiver with 5V nominal voltage and 1Mbps data rate. It features 14 terminals in a small outline package for automotive applications. AEC-Q100 screening level ensures reliability in harsh environments.
TJA1042T/3/1J
NXP Semiconductors' TJA1042T/3/1J is an automotive-grade network interface IC with 8 terminals, operating from -40 to 125°C. It features a small outline package, Gull Wing terminals, and supports a 5V supply voltage. Ideal for interface circuits in automotive applications due to its robust design and high-temperature tolerance.
TJA1051T/3/CM,118
NXP Semiconductors' TJA1051T/3/CM,118 is a CAN transceiver with 5V supply voltage and 1Mbps data rate. It features 8 terminals in a small outline package for automotive applications. AEC-Q100 screening level ensures high reliability in harsh environments.
TJA1042T/3/CM,118
NXP Semiconductors' TJA1042T/3/CM,118 is a network interface with 8 terminals and 5V supply voltage. It operates at 1Mbps data rate, suitable for interface circuits in automotive applications. The small outline package with matte tin finish and gull wing terminals makes it ideal for surface mount designs.
TJA1043T/1J
NXP Semiconductors' TJA1043T/1J is a 14-terminal interface circuit with AEC-Q100 screening. It operates at 5V nominal voltage, suitable for automotive applications. With small outline package style and gull wing terminal form, it measures 8.65mm x 3.9mm x 1.75mm for compact designs.
TJA1042T/1J
NXP Semiconductors' TJA1042T/1J is an automotive-grade network interface IC with 8 terminals, operating from -40 to 125°C. It features a small outline package, Gull Wing terminal form, and supports a nominal voltage of 5V. Ideal for interface circuits in automotive applications requiring robust communication solutions.
TJA1040T/CM,118
NXP Semiconductors' TJA1040T/CM,118 is a CMOS interface circuit with 8 terminals and 1 Mbps data rate. It operates at 5V supply voltage, consuming 0.07 mA current. Ideal for network interfaces in automotive applications due to its small outline package and dual terminal position.
TJA1021TK/20/C,118
NXP Semiconductors' TJA1021TK/20/C,118 is a LIN transceiver with 8 terminals. It operates b/w -40 to 150°C, suitable for automotive applications. The package style is small outline with a max seated height of 0.8mm, making it ideal for space-constrained designs.
TJA1051T/E/1J
NXP Semiconductors' TJA1051T/E/1J is an AEC-Q100 compliant CAN transceiver with 8 terminals, operating at 5V and 1Mbps data rate. It has a temperature range of -40 to 125°C, suitable for automotive applications. The small outline package measures 4.9mm x 3.9mm x 1.75mm, making it ideal for space-constrained designs.
TJA1051T/E,118
NXP Semiconductors' TJA1051T/E,118 is a CAN transceiver with 1 Mbps data rate and 5V nominal voltage. It operates in automotive-grade temperatures (-40 to 125°C) and has AEC-Q100 screening level. This small outline package with gull wing terminals is ideal for automotive network interfaces.
TJA1051T/1J
TJA1051T/1J by NXP Semiconductors is a CAN transceiver with 8 terminals, operating at 5V and supporting data rates up to 1 Mbps. It has a temperature range of -40 to 125°C, making it suitable for automotive applications. The package style is small outline with gull wing terminals, ideal for surface mount designs.
TJA1042T/3,112
NXP Semiconductors' TJA1042T/3,112 is an AEC-Q100 compliant network interface with 8 terminals and 5V supply voltage. It operates at data rates up to 1 Mbps, suitable for automotive applications due to its wide temperature range (-40 to 125°C) and small outline package style.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved