Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MCH3383-TL-W by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, 3.5A ID, and 0.069 ohm RDS(on). Ideal for SWITCHING applications in ENHANCEMENT MODE, it operates b/w -55 to 150 °C with a peak reflow temp of 260 °C.
Median Price
$0.201
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.167
10k+ parts
$0.149
Digiode
$0.188
Chip Stock
Flip Electronics
Vyrian
J2 Sourcing AB
Ampacity Inc.
$0.168
Corphita
$0.178
Corohmni
$0.198
Continental Prestige Electronics
$0.397
$0.202
$0.157
AZTECH Wire
$10.930
QUARKTWIN TECHNOLOGY LTD
Kepictronics
Authorized Procurement Solutions
TANS Electronics
Problanco Electronics
Kulean Microsystems
UHIMA Technologies
SupplyDigital Components
This material is commonly used for transistor packages due to its durability and cost-effectiveness.
P-channel FETs are often used in power management applications and can be advantageous in certain circuit designs.
Having a built-in diode can provide additional functionality and protection in certain switching applications.
Designed specifically for switching applications, making it suitable for use in various electronic devices.
Surface mount technology allows for easy and efficient assembly onto circuit boards.
With a breakdown voltage of 12V, this FET can handle moderate power applications.
Rectangular packages are commonly used in small signal switching applications, offering a compact form factor.
Flat terminals ensure easy and secure soldering connections during assembly.
Enhancement mode FETs offer improved performance and efficiency in switching applications.
Having 3 terminals allows for easy connection and control within a circuit.
With a maximum power dissipation of 1W, this FET can handle moderate power levels without overheating.
Small outline packages are suitable for compact electronic devices where space is limited.
MOSFET technology offers high performance and reliability in small signal switching applications.
With a maximum operating temperature of 150 °C, this FET can withstand high temperature environments.
Silicon FETs are widely used due to their high performance and reliability in electronic circuits.
With a minimum operating temperature of -55 °C, this FET can operate in cold environments without issues.
Tin bismuth provides a reliable and durable finish on the terminals for long-lasting performance.
Capable of handling a maximum drain current of 3.5A, making it suitable for medium power applications.
With a low drain-source on resistance of 0.069 ohm, this FET can minimize power loss in switching applications.
Dual terminal position provides flexibility in circuit design and connection options.
This FET can withstand reflow soldering process for up to 30 seconds without damage.
With peak reflow temperature of 260 °C, this FET can be easily integrated into surface mount assembly processes.
Small Signal Field Effect Transistors (FET) MCH3383-TL-W attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from Onsemi
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
MCH3383-TL-W Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - Mult Dev EOL 7/Apr/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
Grande Electronics
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
1N4148WT
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
Weitronic Enterprise
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
BSS138-7-F
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
Electronic Devices
USB2514BI-AEZG
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
BSS138Q-7-F
BSS138Q-7-F by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage and 0.2A max drain current, ideal for switching applications. It operates in enhancement mode, has 3 terminals, and features a built-in diode. With a max power dissipation of 0.3W and operating temperature range from -55 to 150°C, it meets AEC-Q101 standards for automotive use.
BSS138PS
The NXP Semiconductors BSS138PS is a small signal FET with N-CHANNEL polarity. It features 2 elements with built-in diode for SWITCHING applications. With a min DS Breakdown Voltage of 60V, it has a Max Drain Current of 0.32A and Max Drain-Source On Resistance of 1.6Ω, making it ideal for various ENHANCEMENT MODE operations in electronic circuits.
DMG1029SV-7
DMG1029SV-7 by Diodes Inc. is a Small Signal FET with N/P-channel types, ideal for switching applications. Features include 60V DS breakdown voltage, 0.5A max drain current, and 1W max power dissipation. Utilizes MOSFET tech with 1.7 ohm RDS(on) for efficient operation in enhancement mode at up to 150°C.
DMP2035U-7
DMP2035U-7 by Diodes Inc. is a P-channel FET with 20V DS breakdown voltage, 3.6A max drain current, and 0.045 ohm RDS(on). Ideal for switching applications in small outline packages, it operates in enhancement mode with a max temp of 150°C.
2N7002DW
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
LND150N3-G
LND150N3-G by Microchip is a N-CHANNEL FET with 500V DS Breakdown Voltage. Ideal for SWITCHING applications, it operates in DEPLETION MODE with 0.74W power dissipation and -55 to 150°C temperature range. Package: PLASTIC/EPOXY, Shape: ROUND, Terminals: 3.
FDC6333C
FDC6333C by Onsemi is a small signal field effect transistor (FET) with N-channel and P-channel polarity. It has a min DS breakdown voltage of 30V and max drain current of 2.5A, making it suitable for switching applications. This surface mount transistor operates in enhancement mode and has a max operating temperature of 150°C.
BF862,215
BF862,215 by NXP Semiconductors is a small signal FET with N-channel configuration for amplifier applications. It features a min DS breakdown voltage of 20V and max drain current of 0.04A. With surface mount capability and operating temperature up to 150°C, it offers reliable performance in various electronic circuits.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
BSS127H6327XTSA2
Infineon Technologies
Infineon Technologies' BSS127H6327XTSA2 is a small signal N-channel FET with a min DS breakdown voltage of 600V. It operates in enhancement mode and has a max drain current of 0.021A. This transistor is commonly used in applications requiring high voltage switching and amplification.
2N7000
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; No. of Elements: 1; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
NDS332P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1;
ZVP2106A
Zetex Plc
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .7 W; Maximum Drain Current (Abs) (ID): .28 A; JESD-609 Code: e3;
SI4459ADY-T1-GE3
Vishay Siliconix
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Qualification: Not Qualified; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain-Source On Resistance: .005 ohm;
PMV65XPEAR
Nexperia
PMV65XPEAR by Nexperia is a P-CHANNEL FET with 20V DS Breakdown Voltage and 2.8A ID. Ideal for SWITCHING applications, it features SINGLE configuration with BUILT-IN DIODE in a PLASTIC/EPOXY package. AEC-Q101 & IEC-60134 compliant, it operates in ENHANCEMENT MODE with 0.078 ohm RDS(on).
BSN20-7
Diodes Inc.'s BSN20-7 is a N-channel FET with 50V DS breakdown voltage, 0.5A max drain current, and 1.8 ohm max on resistance. Ideal for switching applications, it operates in enhancement mode with a peak reflow temp of 260°C and AEC-Q101 standard compliance.
NDS9407
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; No. of Elements: 1; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BS170
Siemens
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Package Shape: ROUND;
IRFHS9351TRPBF
IRFHS9351TRPBF by Infineon is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features 2 ELEMENTS, 5.1A Drain Current, and 0.17 ohm On Resistance. With a max power dissipation of 1.4W and operating temperature up to 150°C, it's suitable for various electronic devices requiring high-performance transistors.
FDV304P-F169
Onsemi's FDV304P-F169 is a P-CHANNEL FET for switching applications. It features a 25V DS breakdown voltage, 0.46A max drain current, and 1.1 ohm max on resistance. With a small outline package style and GULL WING terminals, it operates in enhancement mode at -55 to 150 °C temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MCH3478-TL-W
Small Signal Field-Effect Transistors; Terminal Finish: TIN BISMUTH; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e6;
MCH3375-TL-H
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .8 W; JESD-30 Code: R-PDSO-F3; Transistor Application: SWITCHING;
MCH3478-TL-H
Sanyo Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.2 W; Maximum Drain Current (ID): 2 A; Maximum Time At Peak Reflow Temperature (s): 30;
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.2 W; Maximum Drain Current (ID): 2 A; No. of Elements: 1;
MCH3333A-TL-W
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .9 W; Terminal Position: DUAL; Maximum Drain Current (ID): 2 A;
MCH3377-TL-W
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; JESD-609 Code: e6; Maximum Drain-Source On Resistance: .083 ohm;
MCH3374-TL-W
Small Signal Field-Effect Transistors; Peak Reflow Temperature (C): 260; Terminal Finish: TIN BISMUTH; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e6; Moisture Sensitivity Level (MSL): 1;
MCH3382-TL-W
Small Signal Field-Effect Transistors; Terminal Finish: Tin/Bismuth (Sn/Bi); JESD-609 Code: e6; Moisture Sensitivity Level (MSL): 1;
MCH3333
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .9 W; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
MCH3375
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .8 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
MCH3383-TL-H
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Terminal Position: DUAL; No. of Elements: 1;
MCH3377-TL-H
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Package Shape: RECTANGULAR; JESD-609 Code: e6;
MCH3374-TL-E
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Maximum Drain Current (Abs) (ID): 3 A; Transistor Application: SWITCHING;
MCH3382-TL-H
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .8 W; Minimum DS Breakdown Voltage: 12 V; Package Body Material: PLASTIC/EPOXY;
MCH3322
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; Minimum DS Breakdown Voltage: 100 V; Terminal Position: DUAL;
MCH3375-TL-W
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): 1.6 A; No. of Terminals: 3; Moisture Sensitivity Level (MSL): 1;
MCH3333A-TL-H
Small Signal Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; Terminal Finish: TIN BISMUTH; JESD-609 Code: e6;
MCH3376-TL-E
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .8 W; Maximum Drain Current (ID): 1.5 A; Terminal Finish: TIN BISMUTH;
MCH3315
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .9 W; Transistor Application: SWITCHING; JESD-30 Code: R-PDSO-F3;
MCH3312
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1 W; JESD-30 Code: R-PDSO-F3; No. of Terminals: 3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved