Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAC4DSNT4 by Onsemi is a single TRIAC with 800V repetitive peak off-state voltage and 4A max RMS on-state current. It operates b/w -40 to 125 °C, ideal for AC power control applications in small outline packages requiring surface mount assembly.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Advanced Electronics
$2.676
$2.435
$2.194
Problanco Electronics
TANS Electronics
Kulean Microsystems
SupplyDigital Components
Corphita
UHIMA Technologies
Corohmni
This material provides durability and protection for the internal components of the TRIAC, ensuring a longer lifespan.
This high trigger current ensures reliable and consistent switching performance, suitable for a wide range of applications.
The surface mount capability allows for easy and efficient installation on circuit boards, saving space and reducing assembly time.
With a high maximum operating temperature, this TRIAC can withstand harsh environmental conditions and maintain stable performance.
The high off-state voltage rating makes this TRIAC suitable for high voltage applications, providing reliable isolation and protection.
Triode For Alternating Current (TRIAC) MAC4DSNT4 attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from Onsemi
Case Connection:
Configuration:
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
JESD-30 Code:
JESD-609 Code:
Maximum Leakage Current:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Trigger Device Type:
MAC4DSNT4 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
LM358M
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Grande Electronics
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
LM2675M-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Dc Components
LM78L05ACMX/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
Texas Instruments
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
TIC236A
TIC236A by Texas Instruments is a TRIAC with 12A RMS current, 100V repetitive peak off-state voltage, and 2.5V DC gate trigger voltage. It operates b/w -40°C to 110°C, suitable for AC power control applications requiring precise switching capabilities.
MAC15SDG
Onsemi
MAC15SDG by Onsemi is a single TRIAC with 3 terminals, capable of handling up to 15A RMS on-state current and 400V repetitive peak off-state voltage. It operates b/w -40 °C to 110°C, making it suitable for various AC applications requiring precise switching control at low DC gate trigger current of 5mA.
Q8008DH4RP
Littelfuse
Q8008DH4RP by Littelfuse is a single TRIAC with 2 terminals, featuring a max RMS on-state current of 8A and repetitive peak off-state voltage of 800V. Ideal for applications requiring AC power control, such as dimmers and motor speed controllers. Operating temperature ranges from -40 to 125°C.
BT139B-800E,118
Ween Semiconductors
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
Z0405MF1AA2
STMicroelectronics
Z0405MF1AA2 by STMicroelectronics is a TRIAC with 4A RMS current, 600V repetitive peak off-state voltage, and 5mA max DC gate trigger current. Ideal for applications requiring precise AC power control like dimmers, motor speed controllers, and heating regulators.
T1235T-6I
T1235T-6I by STMicroelectronics is a snubberless TRIAC with 600V repetitive peak off-state voltage, 12A max RMS on-state current, and 35mA max DC gate trigger current. It is used in applications requiring AC switching such as dimmers, motor speed control, and heating control systems.
MAC15SN
MAC15SN by Onsemi is a single TRIAC with 15A RMS on-state current and 800V repetitive peak off-state voltage. It operates b/w -40 to 110 °C, ideal for AC power control in various applications like lighting dimmers and motor speed controllers.
MAC15-008
MAC15-008 by Onsemi is a TRIAC with 15A RMS current and 600V repetitive peak off-state voltage. It has a plastic/epoxy body, single configuration, and through-hole terminals. Ideal for AC power control applications due to its flange mount package style and trigger device type as a TRIAC.
Q6030LH5TP
Q6030LH5TP by Littelfuse is a single TRIAC with 600V repetitive peak off-state voltage and 30A max RMS on-state current. It has a plastic/epoxy package body material, -40 to 125 °C operating temperature range, and is ideal for alternating current applications.
T2550-12G-TR
T2550-12G-TR by STMicroelectronics is a single TRIAC with 1200V repetitive peak reverse voltage and 25A max RMS on-state current. It is a snubberless TRIAC suitable for applications requiring high power control, such as industrial motor drives and lighting systems. The device operates b/w -40°C to 125°C, making it ideal for various temperature conditions.
DTA08E
DTA08E by Onsemi is a TRIAC with 1.5V max on-state voltage, 0.8A max RMS current, and 400V repetitive peak off-state voltage. It is used in AC power control applications due to its 10mA max gate trigger current and -40 to 125 °C operating temperature range.
BTA12-800C4G
BTA12-800C4G by Onsemi is a 4 QUADRANT LOGIC LEVEL TRIAC with 800V Repetitive Peak Off-state Voltage and 12A Max RMS On-state Current. It has a Max DC Gate Trigger Current of 25mA, making it suitable for applications requiring precise AC power control in various electronic devices.
MAC223A6
MAC223A6 by Onsemi is a TRIAC with 25A RMS on-state current, 50mA DC gate trigger current, and 400V repetitive peak off-state voltage. It is ideal for applications requiring precise AC power control in various electronic devices.
Z0103MARL1G
Z0103MARL1G by Onsemi is a single TRIAC with 3mA DC gate trigger current, 1A RMS on-state current, and 600V repetitive peak off-state voltage. It is used in applications requiring precise AC power control like dimmers, motor speed controllers, and heating control systems.
Z0107MN0,135
NXP Semiconductors
Z0107MN0,135 by NXP Semiconductors is a TRIAC with 600V repetitive peak off-state voltage and 1A max RMS on-state current. It has a 5mA max DC gate trigger current and operates b/w -40°C to 150°C. Ideal for AC power control applications requiring precise switching capabilities.
BT138-600E
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
TIC205B
TIC205B by Texas Instruments is a TRIAC with 3 terminals, max. RMS current of 2A, and DC gate trigger voltage of 2V. It operates b/w -40 to 110°C and is ideal for AC power control applications due to its 4-quadrant logic level trigger device type.
BTA41-600BRG
BTA41-600BRG by STMicroelectronics is a TRIAC with a max RMS on-state current of 40A and a repetitive peak off-state voltage of 600V. It is commonly used in applications requiring 4 quadrant logic level triggering, such as motor control and lighting systems.
T1635-600G-TR
STMicroelectronics T1635-600G-TR is a single TRIAC with 16A max RMS on-state current, 35mA max DC gate trigger current, and 600V repetitive peak off-state voltage. Ideal for snubberless applications in temperature range -40 to 125°C.
BTA06T-600CWRG
BTA06T-600CWRG by STMicroelectronics is a single TRIAC with 600V repetitive peak off-state voltage and 6A max RMS on-state current. It has a snubberless design, 35mA DC gate trigger current, and operates b/w -40 to 125°C. Ideal for AC power control applications requiring high reliability and performance in industrial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MAC4DSNT4G
TRIAC; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
MAC4DCN-1G
TRIAC; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
MAC4DHMT4G
MAC4DCMT4G
MAC4DCN-1
MAC4DCM-001G
MAC4DCNT4
MAC4DCMT4
MAC4DHM-001
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): IN-LINE; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
MAC4DCNT4G
MAC4DCM-1
MAC4DHM
TRIAC; Surface Mount: YES; Maximum Leakage Current: .01 mA; Maximum DC Gate Trigger Voltage: 1.3 V; Maximum Operating Temperature: 110 Cel; Maximum RMS On-state Current: 4 A;
MAC4DCN
TRIAC; Surface Mount: YES; Maximum DC Gate Trigger Voltage: 5 V; Maximum Holding Current: 35 mA; Maximum Leakage Current: .01 mA; Maximum RMS On-state Current: 4 A;
MAC4DCM
TRIAC; Surface Mount: YES; Maximum Leakage Current: .01 mA; Minimum Critical Rate of Rise of Off-state Voltage: 500 V/us; Repetitive Peak Off-state Voltage: 600 V; Maximum DC Gate Trigger Voltage: 5 V;
MAC4DCN-001
MAC4DHM-1
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved