Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LC75742E by Onsemi is a CMOS Graphics Display Driver with 64 terminals in a square flatpack package. Operating temperature ranges from -40 to 85 °C, suitable for industrial applications. It requires a nominal voltage of 5V and has a max supply current of 10mA.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Kulean Microsystems
Problanco Electronics
TANS Electronics
SupplyDigital Components
Corphita
UHIMA Technologies
Corohmni
The use of plastic/epoxy material makes the product lightweight and durable, ensuring longevity and reliability.
The surface mount capability allows for easy installation and space-saving design, making it suitable for compact electronic devices.
With a higher number of terminals, this product can support complex connections and functionalities, making it versatile for various applications.
The high maximum operating temperature allows the product to withstand harsh environmental conditions, ensuring consistent performance.
The use of CMOS technology ensures low power consumption and high speed operation, enhancing efficiency and performance.
Graphics Display Drivers LC75742E attributes and parameters. Explore more Graphics Display Drivers devices from Onsemi
JESD-30 Code:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Sub-Category:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
LC75742E Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Silicon Standard
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Laube Technology
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
Secos
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
NSI50010YT1G
Onsemi
NSI50010YT1G by Onsemi is a small outline LED display driver with 2 terminals, matte tin finish, and gull wing terminal form. It has a peak reflow temperature of 260°C and is suitable for graphics display applications requiring compact design and surface mount technology.
PCA9532PW
Philips Semiconductors
Display Drivers; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR;
MAX16834AUP+T
Maxim Integrated
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR;
TPS54200DDCT
TPS54200DDCT by Texas Instruments is a graphics display driver with a max supply voltage of 28V. It has a small outline, thin profile package style and operates in industrial temperature range (-40 to 85°C). This LED display driver is suitable for various applications requiring high voltage and compact size.
BCR420UE6327
Infineon Technologies
BCR420UE6327 by Infineon Technologies is a Graphics Display Driver with 6 terminals, operating at 24V. It has a max supply voltage of 40V and is AEC-Q101 compliant. Ideal for LED display driver applications due to its small outline package style and bipolar technology.
TLC6C5724QDAPRQ1
TLC6C5724QDAPRQ1 by Texas Instruments is a Graphics Display Driver with 24 channels, operating voltage range of 3-5.5V, and max frequency of 4MHz. Ideal for automotive applications due to AEC-Q100 screening, it features serial data input mode and compact rectangular package design.
PCF8566T/1
PCF8566T/1 by NXP Semiconductors is a graphics display driver with a segment display mode and serial data input. It has a small outline, shrink pitch package style and can operate in industrial temperature grades. It is commonly used as an interface IC for liquid crystal displays (LCDs).
MAX7219EWG+T
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
LP55231SQE/NOPB
LP55231SQE/NOPB by Texas Instruments is a graphics display driver with 9 channels and constant-current output. It operates at 2.7-5.5V, -40 to 85°C, with a max supply current of 0.95mA. Ideal for LED displays, it features serial data input mode and multiplexed display capability in a square chip carrier package style.
PCF8577CT/F3,118
NXP Semiconductors' PCF8577CT/F3,118 is a 40-terminal graphics display driver with dot matrix display mode and serial data input. Operating b/w -40 to 85 °C, it supports multiplexed displays and has a max supply voltage of 6 V. Ideal for industrial applications requiring liquid crystal display drivers in compact spaces.
STP08DP05MTR
STMicroelectronics
STP08DP05MTR by STMicroelectronics is a Graphics Display Driver with 8 segments, serial data input mode, and 5.5V max supply voltage. Ideal for LED display driver applications in automotive industry due to its small outline package style and dual terminal position.
ICM7211AMIPLZ
Renesas Electronics
Renesas Electronics ICM7211AMIPLZ is a 4-DIGIT LCD driver with 28 segments, operating at 0.019 MHz. It features a supply voltage range of 4.5V to 5.5V and an industrial temperature grade of -40°C to 85°C. Ideal for graphics display applications requiring parallel data input in segment display mode.
CAP1126-1-AP-TR
Microchip Technology
CAP1126-1-AP-TR by Microchip Technology is a graphics display driver with SERIAL data input mode, 16 terminals, and TRUE output polarity. It operates b/w 0 to 85 °C and has a supply voltage range of 3V to 3.6V. Ideal for LED display driver applications due to its compact square chip carrier package style.
MAX20090ATP/VY+T
Analog Devices
LED DISPLAY DRIVER; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: Matte Tin (Sn) - annealed; Screening Level: AEC-Q100;
MAX6952EAX+
MAX6952EAX+ by Analog Devices is a 4-DIGIT LED DISPLAY DRIVER with DOT MATRIX display mode. It operates at 2.7-5.5 V, -40 to 85 °C, and has a max fmax of 8 MHz. Ideal for industrial applications requiring multiplexed display capability in small outline packages.
LT3475EFE-1#TRPBF
Analog Devices' LT3475EFE-1#TRPBF is a LED display driver with 2 functions, operating at -40 to 85°C. It has a supply voltage range of 4-36V and comes in a small outline package suitable for industrial applications. The terminal finish is matte tin, and it features gull wing terminals with a pitch of 0.65mm.
PCF2112CT/1,112
NXP Semiconductors' PCF2112CT/1,112 is a DOT MATRIX display driver with SERIAL data input mode. It operates b/w -40 to 85 °C and has a supply voltage range of 2.25V to 6V. Ideal for industrial applications requiring a compact SMALL OUTLINE package with GULL WING terminals.
NSIC2030JBT3G
LED DISPLAY DRIVER; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN;
LT3761EMSE#PBF
Linear Technology
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Power Supplies (V): 24;
TPS92691QPWPRQ1
TPS92691QPWPRQ1 by Texas Instruments is a graphics display driver with 16 terminals, operating voltage range of 6.5V to 65V, and constant-current output. It is designed for automotive applications, featuring AEC-Q100 screening level and compact rectangular package style suitable for LED displays.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LC75832ES-E
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: QFP; Package Shape: SQUARE;
LC75843UGA-AH
LIQUID CRYSTAL DISPLAY DRIVER; Moisture Sensitivity Level (MSL): 3; Peak Reflow Temperature (C): 260; JESD-609 Code: e6; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: TIN BISMUTH;
LC7582E
Sanyo Electric
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: QFP; Package Shape: SQUARE;
LC75857W-E
LC75805PEH-3H
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: QFP; Package Shape: RECTANGULAR;
LC75808WS-E
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: QFP; Package Shape: SQUARE;
LC75809PT
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
LC75809PT-H
LC75725E
Display Drivers; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: QFP; Package Shape: SQUARE;
LC75741W
LC75806PT
LIQUID CRYSTAL DISPLAY DRIVER;
LC75808W-E
LC75760UJA-AH
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: LSSOP; Package Shape: RECTANGULAR;
LC75808W-SH-E
LC75741E
LC75806PT-H
LC75806PTS-H
LC75806PTS-T-H
LC75805PES-3H
LC7574NW
VACUUM FLUORESCENT DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: LFQFP; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved