Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 30; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
AZTECH Wire
$18.550
TANS Electronics
Kulean Microsystems
Problanco Electronics
SupplyDigital Components
Corphita
Microchip USA
Corohmni
UHIMA Technologies
Motion Control ICs LB11697V-W-AH attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LB11697V-W-AH Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 19/Dec/2017
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM555CN
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
New Jersey Semiconductor Products
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Siemens
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
Infinex
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
Lite-on Semiconductor
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DRV8821DCAR
DRV8821DCAR by Texas Instruments is a Motion Control IC with 2 functions, suitable for Stepper Motor Controllers. It operates at a supply voltage range of 8-32V and can handle a max output current of 1.5A. This industrial-grade IC comes in a small outline package with gull wing terminals.
TLE62086GXUMA2
Infineon Technologies
TLE62086GXUMA2 by Infineon is a Motion Control IC with 28 terminals, operating at 5V. It is a Brush DC Motor Controller with a max output current of 2A. This small outline package IC is ideal for motion control applications requiring precise voltage regulation and high current output.
MC3479P
MC3479P by Onsemi is a Motion Control IC with 16 terminals, operating at 12V. It features a max output current of 0.5A and operates in a temperature range of 0-70°C. Ideal for stepper motor control applications due to its bipolar technology and through-hole terminal form.
DRV8873SPWPRQ1
DRV8873SPWPRQ1 by Texas Instruments is a motion control IC with a nominal voltage of 13.5V and a max operating temperature of 125°C. It is used as a brush DC motor controller in automotive applications.
L6234D
L6234D by STMicroelectronics is a Motion Control IC with 20 terminals, operating at a supply voltage range of 8-48V. It features a max output current of 2.5A and is designed for Brushless DC Motor control applications. The IC utilizes BCDMOS technology in a small outline package with gull wing terminals, making it suitable for compact designs requiring precise motor control.
DRV8353HMRTAT
DRV8353HMRTAT by Texas Instruments is a Motion Control IC with 40 terminals, operating voltage of 9-10V, and output current up to 1A. Ideal for Brushless DC Motor control applications in military-grade environments, featuring a compact square package design for surface mounting.
IRSM505-025PA
International Rectifier
AC MOTOR CONTROLLER;
IRAM136-3023B
AC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 18; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Pitch: 2.54 mm;
L297D
STMicroelectronics L297D is a Motion Control IC with 20 terminals, operating at 5V. It is a Stepper Motor Controller in a small outline package, suitable for applications requiring precise motion control. With bipolar technology and Gull Wing terminals, it offers reliable performance at supply voltages ranging from 4.75V to 7V.
PDRV8245SPWPQ1
PDRV8245SPWPQ1 by Texas Instruments is a Motion Control IC with AEC-Q100 screening. It operates b/w -40 to 125 °C, supporting a Vsup range of 4.5V to 35V and delivering up to 32A output current. Ideal for automotive applications due to its robust design and high performance in controlling half bridge brush DC motors.
TMC260C-PA
Trinamic Motion Control & Kg
STEPPER MOTOR CONTROLLER; No. of Terminals: 44; Package Code: LFQFP; Package Shape: SQUARE; Surface Mount: YES; Additional Features: it also has 2k ESD wrt application handling;
DRV8256ERGER
DRV8256ERGER by Texas Instruments is a Motion Control IC with 24V nominal voltage, 5A max output current, and 48V max supply voltage. It is ideal for automotive applications due to its nickel palladium gold terminal finish and -40 to 125°C operating temperature range. The chip carrier package style with a very thin profile makes it suitable for compact designs requiring precise brush DC motor control.
FSBB30CH60CT
AC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Operating Temperature: 125 Cel;
BD67929EFV-E2
ROHM
ROHM's BD67929EFV-E2 is a Motion Control IC with 28 terminals, operating voltage range of 19-28 V. It features a max output current of 2.5 A and operates b/w -25 to 85°C. Ideal for Brushless DC Motor control applications due to its compact size and dual terminal position design.
L6202
Sprague Electric
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LMD18245T/NOPB
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 15; Package Code: ZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
A4963GLPTR-T
Allegro MicroSystems
Allegro MicroSystems' A4963GLPTR-T is a Motion Control IC with 20 terminals, operating voltage range of 4.2V to 28V, and temp range from -25°C to 150°C. Ideal for Brushless DC Motor control applications due to its compact rectangular package design and surface-mount capability.
SLA7078MPRT
Allegro MicroSystems' SLA7078MPRT is a Motion Control IC with 23 terminals, operating voltage of 5V, and output current up to 3A. Ideal for stepper motor control applications, it has a temperature range from -20°C to 85°C and supports supply voltages from 3V to 5.5V.
LV8413GP-E
LV8413GP-E by Onsemi is a Motion Control IC in PLASTIC/EPOXY package with 16 terminals. Operates at -30 to 85 °C, BICMOS tech, and supports 3.3V/5V power supplies. Ideal for motion control applications requiring precise voltage regulation.
UC2625DW
UC2625DW by Texas Instruments is a motion control IC with 12V nominal voltage and 2A max output current. Ideal for brushless DC motor control applications, it features a small outline package style, industrial temperature grade, and surface mount capability. With a wide operating temperature range from -40 to 85°C, this bipolar technology IC offers high performance in various industrial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LB11600JV-TLM-E
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 30; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB11660FV-TLM-E
LB11660FV-TLM-E by Onsemi is a Motion Control IC with 16 terminals, operating voltage of 4-15V, and output current up to 1.5A. Ideal for Brushless DC Motor control applications, it features a compact rectangular package with low profile design and operates b/w -30 to 90°C temperature range.
LB11867RV-TLM-H
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB11851FA-BH
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
LB11696V-TLM-E
LB11696V-W-AH
LB11696V-MPB-E
LB11696V-TRM-E
LB11867FV-TLM-H
LB11651H
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 44; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB11620T-MPB-E
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB11660FV-MPB-E
LB11651-E
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 14; Package Code: HSZIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LB11620T
LB11660FV
LB11610P
Motion Control Electronics; Temperature Grade: INDUSTRIAL; No. of Terminals: 44; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LB11660FV-MPB-H
LB11600JV-MPB-E
LB11620GP
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: VQCCN; Package Shape: SQUARE; Surface Mount: YES;
LB11620T-TLM-E
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved