Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LA6588MC-AH by Onsemi is a Motion Control IC with 24V nominal voltage, suitable for Brushless DC Motor Controller applications. It features a small outline package style, Gull Wing terminal form, and operates b/w -30 to 90°C temperature range.
Median Price
$0.874
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.858
1k+ parts
$0.713
10k+ parts
$0.635
DigiKey
$1.070
Verical
$0.891
$0.794
Farnell
$0.775
$0.556
$0.516
Digiode
$0.700
Nova Conductors
$0.749
Chip Stock
Vyrian
Semicontronic
$0.630
$0.614
$0.611
Ampacity Inc.
Corphita
$0.663
Corohmni
$0.734
Bastille Electronics
$0.712
$0.676
$0.667
Argo Parts USA
Aztec Data Supply Inc.
$6.420
AZTECH Wire
$17.640
Continental Prestige Electronics
Kulean Microsystems
SupplyDigital Components
Problanco Electronics
Authorized Procurement Solutions
TANS Electronics
UHIMA Technologies
Microchip USA
Kepictronics
Provides durability and protects the internal components of the IC, ensuring long-lasting performance.
Optimal supply voltage for efficient operation of the motion control IC.
Allows the IC to operate in a wide range of temperature conditions, making it suitable for various environments.
Can function in colder temperatures, enhancing the versatility of the IC.
Sufficient number of terminals for connectivity and integration with other components in a motion control system.
Capable of delivering high output current, making it suitable for driving motors in motion control applications.
Motion Control ICs LA6588MC-AH attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LA6588MC-AH Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 19/Dec/2017 Mult Dev EOL 7/Apr/2021 Mult Dev EOL Retraction 15/Jun/2018
PCN Design/Specification - Mult Dev Material Chg 12/Dec/2018
PCN Assembly/Origin - MFP10SK Products Transfer Revision 21/Jan/2014
PCN Other - Temporary Suspension 08/Sep/2021
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
1N4148WS
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
Microsemi
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
Micropac Industries
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
DRV10866DSCR
DRV10866DSCR by Texas Instruments is a motion control IC with a square package and a small outline, heat sink/slug, very thin profile. It operates at a nominal voltage of 3V and has a max output current of 0.85A. This IC is commonly used as a brushless DC motor controller in industrial applications.
IRAMY20UP60B
Infineon Technologies
Infineon Technologies' IRAMY20UP60B is a 15-20V AC motor controller with 40A output current. Its hybrid technology and zig-zag terminal position make it ideal for motion control applications. The rectangular package style with flange mount and 18 terminals ensure easy integration in various systems.
FSBB20CH60C
Fairchild Semiconductor
AC MOTOR CONTROLLER; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Package Style (Meter): MICROELECTRONIC ASSEMBLY; Minimum Supply Voltage (Vsup): 13.5 V;
MAX22205ATU+
Maxim Integrated
BRUSH DC MOTOR CONTROLLER; No. of Terminals: 38; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES; No. of Functions: 1;
MAX14872ETC+T
BRUSH DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: HVSON; Package Shape: SQUARE; Surface Mount: YES;
A3967SLBTR-T
Allegro MicroSystems
Allegro MicroSystems' A3967SLBTR-T is a Motion Control IC with 24 terminals, operating voltage of 3-5V, and max output current of 0.85A. Ideal for stepper motor control applications due to its bipolar technology and compact small outline package design.
TC648BEOA
Microchip Technology
Microchip Technology's TC648BEOA is a motion control IC with 1 function, operating at a nominal voltage of 5V. It is used as a brushless DC motor controller in industrial applications.
L297D
STMicroelectronics
STMicroelectronics L297D is a Motion Control IC with 20 terminals, operating at 5V. It is a Stepper Motor Controller in a small outline package, suitable for applications requiring precise motion control. With bipolar technology and Gull Wing terminals, it offers reliable performance at supply voltages ranging from 4.75V to 7V.
DRV8876NPWPR
DRV8876NPWPR by Texas Instruments is a Motion Control IC with 16 terminals, operating voltage range of 4.5V to 37V, and temperature range from -40°C to 125°C. It is designed for brush DC motor control applications in automotive environments due to its small outline package and high-temperature tolerance up to 260°C during reflow.
VNH7070BASTR
VNH7070BASTR by STMicroelectronics is a Motion Control IC with 16 terminals, AEC-Q100 screening level, and 4-28 V supply voltage range. It is a brush DC motor controller in small outline package suitable for automotive applications.
L297
STMicroelectronics L297 is a Motion Control IC with 20 terminals, operating at -40 to 150°C. It has a supply voltage of 5V and is ideal for automotive applications due to its bipolar technology. The package material is plastic/epoxy, in-line style, with rectangular shape and matte tin finish on dual-positioned terminals.
TLE71851EXUMA1
TLE71851EXUMA1 by Infineon Technologies is a motion control IC with a nominal voltage of 7V. It is a small outline package with 36 terminals and can be used as an AC motor controller. Its compact size (12.8mm length, 7.6mm width) makes it suitable for various applications requiring precise motion control.
MC33035DWG
Onsemi
MC33035DWG by Onsemi is a Motion Control IC with 24 terminals, operating voltage range of 10-20V. It is a Brushless DC Motor Controller in small outline package suitable for industrial applications. Features include max output current of 0.1A, temp range -40 to 85°C, and terminal pitch of 1.27mm.
VNH7040AYTR
VNH7040AYTR by STMicroelectronics is a Motion Control IC with 36 terminals, AEC-Q100 screening level, and 13V nominal voltage. It is used as a Brush DC Motor Controller in automotive applications due to its compact rectangular package and dual terminal position.
DRV10963PDSNT
DRV10963PDSNT by Texas Instruments is a Motion Control IC with 10 terminals, operating at -40 to 85°C. It supports brushless DC motor control, with a supply voltage range of 2.1V to 5.5V and peak reflow temperature of 260°C. This square-shaped IC in small outline package is ideal for industrial applications requiring precise motion control in compact spaces.
DRV8304HRHAT
DRV8304HRHAT by Texas Instruments is a Motion Control IC with 40 terminals, operating temperature range of -40 to 125°C, and supply voltage from 6V to 38V. It is ideal for automotive applications as a Brushless DC Motor Controller in a square chip carrier package suitable for surface mount assembly.
MC3479PG
MC3479PG by Onsemi is a Motion Control IC with 16 terminals, operating at 12V. It features a max output current of 0.5A and operates in a temperature range of 0-70°C. Ideal for stepper motor control applications due to its bipolar technology and through-hole terminal form.
DRV8703QRHBTQ1
DRV8703QRHBTQ1 by Texas Instruments is a Motion Control IC with 32 terminals, operating voltage range of 5.5V to 45V, and temperature grade suitable for automotive applications. It features a max operating temperature of 125°C, package style in chip carrier with very thin profile, and terminal finish in Nickel/Palladium/Gold. Ideal for stepper motor control systems requiring precise motion control in harsh environments.
TLE52062SAKSA1
TLE52062SAKSA1 by Infineon is a BCDMOS Motion Control IC with 6A max output current. It operates at 6-40V, suitable for brush DC motor control applications. This rectangular IC has 7 terminals and a flange mount package style.
DRV10983PWP
DRV10983PWP by Texas Instruments is a Brushless DC Motor Controller with 24V nominal voltage and 3A max output current. This motion control IC is designed for automotive applications, featuring a small outline package with gull wing terminals and operating temperature range from -40 to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LA6584M-TLM-H
LA6584M-TLM-H by Onsemi is a motion control IC with 16 terminals, operating voltage of 2.8-12V, and max output current of 1.6A. Ideal for brushless DC motor control applications due to its small outline package and temp range of -30 to 90°C.
LA6597FMC-AH
LA6597FMC-AH by Onsemi is a Motion Control IC with 12V supply voltage, 1A output current, and -30 to 110°C operating temperature range. Ideal for Brushless DC Motor control applications due to its bipolar technology, small outline package style, and dual terminal position.
LA6583MC
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LA6581U-TE-L-E
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOF; Package Shape: SQUARE; Surface Mount: YES;
LA6581M
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LA6541ND
Motion Control Electronics; Temperature Grade: COMMERCIAL; No. of Terminals: 30; Package Code: SDIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LA6583MC-AH
LA6565
BRUSH DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 36; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LA6581MC-BH
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LA6581MC-DH
LA6581U
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LA6581DMR2G
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
LA6583M
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 10; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LA6560
Motion Control Electronics; Temperature Grade: OTHER; No. of Terminals: 44; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LA6565VR
BRUSH DC MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 44; Package Code: HLSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LA6581T
LA6581T-TE-L-E
LA6581MC
LA6502
Motion Control Electronics; Temperature Grade: COMMERCIAL; No. of Terminals: 54; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LA6588M
Sanyo Electric
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved