Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FPF1008 by Onsemi is a peripheral driver with 6 terminals, operating at 1.2-5.5V and -40 to 85°C. It features built-in transient protection, 0.65mm terminal pitch, and a turn-on time of 125us. Ideal for industrial applications requiring a compact, high-performance buffer or inverter-based peripheral driver in a small outline package.
Median Price
$0.522
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Farnell
1+ parts
$0.334
100+ parts
-
1k+ parts
$0.293
10k+ parts
$0.258
Rochester
$0.383
$0.360
$0.325
Element14
$0.661
$0.576
$0.492
Arrow
$0.702
$0.443
$0.319
$0.288
Mouser Electronics
$0.830
$0.480
$0.354
$0.313
Verical
$0.378
$0.299
$0.266
Flip Electronics (Authorized)
Digiode
$0.364
Nova Conductors
$0.597
Flip Electronics
Vyrian
Chip Stock
Connector Distribution Corp
Prism Electronics
Ampacity Inc.
$0.321
Corphita
$0.345
Corohmni
Bastille Electronics
$0.567
$0.539
$0.531
Argo Parts USA
$0.579
Continental Prestige Electronics
$0.585
Microchip USA
$2.275
Perfect Parts
Problanco Electronics
SupplyDigital Components
Kulean Microsystems
TANS Electronics
Authorized Procurement Solutions
Futuretech Components
Supply Digital
UHIMA Technologies
Provides durability and protection for the internal components of the peripheral driver.
Allows for a higher voltage input range, increasing compatibility with various systems.
Supports low voltage applications while maintaining optimal performance.
Ensures stable operation even in high temperature environments.
Suitable for use in extreme cold conditions without compromising functionality.
Provides current sourcing capability, suitable for driving external components.
Peripheral Drivers FPF1008 attributes and parameters. Explore more Peripheral Drivers devices from Onsemi
Built-in Protections:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
FPF1008 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
LM358AN
Texas Instruments
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
ULN2803AN
Motorola
Peripheral Drivers; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
TPS22965NQWDSGRQ1
TPS22965NQWDSGRQ1 by Texas Instruments is a peripheral driver with 8 terminals, operating voltage range of 2.5V to 5.5V, and automotive temperature grade up to 125°C. It features built-in transient protection and sink output current flow direction, making it ideal for automotive applications requiring reliable performance in harsh environments.
BTS441TGNTMA1
BTS441TGNTMA1 by Infineon is a 4-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 4.75V to 43V, with a nominal output peak current limit of 21A. This small outline package IC is ideal for applications requiring sink output current flow direction and turn-on/off times of 200us/250us.
L293B
STMicroelectronics
L293B by STMicroelectronics is a 16-terminal peripheral driver with a max supply voltage of 36V. It features built-in protections for over current and thermal issues, making it ideal for applications requiring a true output polarity and nominal output peak current limit of 2A. The technology used is bipolar with an interface IC type of half bridge based peripheral driver.
ULN2003D
Signetics
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Terminal Pitch: 1.27 mm;
MIC5842YN
Microchip Technology
MIC5842YN by Microchip Technology is an 8-bit SIPO-based peripheral driver with inverted output polarity. It operates at a nominal voltage of 5V and has a max supply current of 16mA. Ideal for industrial applications, it offers built-in transient protections and sink output current flow direction.
DRV103H/2K5G3
DRV103H/2K5G3 by Texas Instruments is a peripheral driver with a max supply voltage of 32V and built-in protections for transient, over current, and thermal issues. It operates in industrial temperature grades from -40 to 85°C, making it suitable for various applications requiring a nominal output peak current limit of 3.5A. The package style is small outline with gull wing terminals, ideal for surface mount designs.
L293D
L293D by STMicroelectronics is a peripheral driver with 2 functions, operating at a max supply voltage of 36V. It features built-in transient and thermal protections, suitable for applications requiring true output polarity and standard input characteristics. With a nominal output peak current limit of 1.2A, this half bridge-based peripheral driver is ideal for various electronic projects.
FDC6330L_NL
FDC6330L_NL by Fairchild Semiconductor is a CMOS peripheral driver with 6 terminals, 2.3A output current, and built-in transient protection. It operates in temperatures ranging from -55 to 150°C and is ideal for military-grade applications requiring a low-profile, small outline package with source current flow direction.
BTN8962TAAUMA1
BTN8962TAAUMA1 by Infineon is a MOS technology peripheral driver with 7 terminals. It offers built-in protections against transient, over current, and over voltage. Ideal for applications requiring a half bridge based interface IC with true output polarity and source/sink current flow direction.
TBD62783AFNG,EL
Toshiba
Toshiba's TBD62783AFNG,EL is a peripheral driver with 8 functions and a max supply voltage of 50V. It has a small outline package style and is suitable for industrial applications.
TPS2H160BQPWPRQ1
TPS2H160BQPWPRQ1 by Texas Instruments is a Peripheral Driver with 2 functions, operating at -40 to 125 °C. It offers built-in protections for transient, over current, thermal, and under voltage scenarios. Ideal for automotive applications due to its AEC-Q100 screening level and high side driver feature.
ULN2068B
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: HDIP; Package Shape: RECTANGULAR;
VND5050J-E
VND5050J-E by STMicroelectronics is a peripheral driver with 36V max supply voltage, built-in protections, and 12 terminals. It is used as a buffer or inverter-based peripheral driver for applications requiring sink output current flow direction. The package style is small outline with low profile and matte tin terminal finish.
TPS27S100ARRKR
TPS27S100ARRKR by Texas Instruments is a high-side driver with 16 terminals and built-in protections for transient, over current, thermal, and under voltage. It operates b/w -40 to 125°C, suitable for automotive applications. With a max supply voltage of 40V and turn-on time of 80µs, it offers efficient sink output current flow direction.
ISO1H812GAUMA1
Infineon's ISO1H812GAUMA1 is a 36-terminal peripheral driver with 8-bit driver configuration and 0.625 A output current. It operates on power supplies of 3.3/5,15/30 V and has a max output peak current limit of 2.2 A. Ideal for applications requiring sink flow direction such as half bridge based interface ICs in small outline packages.
BTS452TATMA1
BTS452TATMA1 by Infineon is a MOS technology peripheral driver with 4 terminals. It offers built-in protections for transient, over current, and over voltage situations. With a max supply voltage of 52V, it is ideal for applications requiring a nominal output peak current limit of 2.2A such as buffer or inverter based systems.
VND5050AK-E
VND5050AK-E by STMicroelectronics is a peripheral driver with 24 terminals, operating voltage range of 4.5-36 V, and built-in protections against various faults. It features a small outline package style suitable for surface mount applications. Ideal for buffering or inverting signals in electronic circuits requiring source current flow direction control.
DRV8846RGET
Texas Instruments DRV8846RGET is a 24-terminal peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates in industrial temperature range (-40 to 85°C) with a max output current of 2A. Ideal for applications requiring source and sink output current flow direction in a compact chip carrier package.
BTS462TATMA1
BTS462TATMA1 by Infineon is a peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It has a max supply voltage of 34V and nominal output peak current limit of 4.4A. Ideal for applications requiring sink output current flow direction in a small outline package style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FPF1321UCX
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 6; Package Code: VFBGA; Package Shape: RECTANGULAR;
FPF1009
FPF1009 by Onsemi is a peripheral driver with 6 terminals, operating voltage range of 1.2V to 5.5V, and built-in transient protection. It comes in a small outline package with very thin profile, suitable for industrial applications requiring source current flow control. The device has fast turn-on time of 2000us and turn-off time of 40us, making it ideal for buffer or inverter based interface ICs.
FPF1320UCX
FPF1320UCX-T
BUFFER OR INVERTER BASED PERIPHERAL DRIVER;
FPF1107
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 4; Package Code: FBGA; Package Shape: SQUARE;
FPF1007
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: HVSON; Package Shape: SQUARE;
FPF1321BUCX
FPF1207UCX
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 4; Package Code: VFBGA; Package Shape: SQUARE;
FPF1016
FPF1016 by Onsemi is a square-shaped peripheral driver with 6 terminals, operating at -40 to 85°C. It features a max output current of 1A and interface IC type as buffer or inverter based. Ideal for applications requiring sink output current flow direction in industrial temperature grade environments.
FPF1208UCX
FPF1017
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 6; Package Code: SON; Package Shape: SQUARE;
FPF1018
FPF1013
FPF1103
FPF1014
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved