Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FDMC3612 by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 15A and EAS of 32mJ, suitable for ENHANCEMENT MODE operation. With a Drain Current of 16A and 0.11 ohm RDS(on), this transistor offers high performance in a SMALL OUTLINE package.
Median Price
$0.740
Lifecycle Status
Suppliers In-Stock
28
In-Stock Inventory
1k+
Arrow
1+ parts
$0.680
100+ parts
$0.547
1k+ parts
$0.535
10k+ parts
-
Chip1Stop
$0.800
$0.620
Newark
$1.070
$0.445
$0.314
Mouser Electronics
$1.230
$0.394
Farnell
$1.391
$0.817
$0.559
Element14
$1.730
$1.150
$0.824
$0.754
Flip Electronics (Authorized)
Rochester
$0.374
$0.311
$0.277
DigiKey
$0.297
Verical
$0.389
$0.346
Future Electronics
$0.500
Master Electronics
$0.658
$0.603
$0.557
RS (Exports)
$0.896
Digiode
IBS Electronics
$0.804
$0.726
$0.705
$1.636
Nova Conductors
$0.831
Maritex
$1.007
$0.542
$0.427
Flip Electronics
Chip Stock
Vyrian
Cyclops Electronics Ltd
Sensible Micro Corp
Kruse Electronics AG
NAC Semi
$2.150
Bristol Electronics
A2Z Electronics, Inc.
Microfarads
LWI Electronics Inc
Ampacity Inc.
$0.212
Semicontronic
$0.207
$0.206
Corohmni
$0.250
Corphita
$0.263
Component Stockers USA
$0.810
$0.450
$0.420
Argo Parts USA
Netroflash
Continental Prestige Electronics
$1.260
$0.533
Aztec Data Supply Inc.
$1.414
Microchip USA
$3.849
Perfect Parts
RC Electronics
$0.570
$0.520
$0.510
Kepictronics
Futuretech Components
GreenTree Electronics
Authorized Procurement Solutions
Lixinc
TANS Electronics
Problanco Electronics
SupplyDigital Components
S.R.D Solutions
Kulean Microsystems
Supply Digital
UHIMA Technologies
The plastic/epoxy package material allows for lightweight and durable construction, making it ideal for various applications.
N-channel transistors typically have higher mobility and conductivity compared to P-channel counterparts, offering better performance in many switching applications.
Designed specifically for switching applications, this FET offers fast response times and efficient power handling capabilities.
Surface mount capability allows for easy and efficient PCB assembly, saving space and facilitating mass production.
With a minimum breakdown voltage of 100V, this FET can handle high voltage applications with ease.
The high maximum drain current rating of 16A ensures reliable performance even under heavy load conditions.
The high power dissipation rating of 35W allows for efficient heat dissipation and long-term reliability.
With a maximum operating temperature of 150°C, this FET can withstand high temperature environments without compromising performance.
Power Field Effect Transistors (FET) FDMC3612 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
FDMC3612 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
FDD86102LZ
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 54 W; JESD-30 Code: R-PSSO-G2; Maximum Drain Current (ID): 8 A;
IRFH5010TRPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 250 W; Package Style (Meter): SMALL OUTLINE; Minimum DS Breakdown Voltage: 100 V;
FDB2710
FDB2710 by Onsemi is a N-CHANNEL Power FET with 250V DS Breakdown Voltage, 50A Drain Current, and 0.0425 ohm On Resistance. Ideal for power management applications due to its 260W Power Dissipation, ENHANCEMENT MODE operation, and built-in DIODE configuration.
FDD7N25LZTM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 56 W; Package Body Material: PLASTIC/EPOXY; Transistor Element Material: SILICON;
BSP315PH6327
Infineon Technologies
Infineon's BSP315PH6327 is a P-CHANNEL FET with 60V DS Breakdown Voltage and 4.68A IDM. Ideal for automotive applications, it features a built-in diode, 0.8 ohm RDS(on), and 24mJ EAS rating. AEC-Q101 compliant, this MOSFET has a small outline package and matte tin finish for enhanced performance in harsh environments.
IRLML6344TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
FDMC86102LZ
FDMC86102LZ by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 30A IDM. Ideal for SWITCHING applications, it features a built-in diode, 0.024 ohm RDS(on), and 41W Pdiss. Suitable for surface mount designs in various electronic systems requiring high power efficiency and reliability.
IRF530NSTRLPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Position: SINGLE; JESD-609 Code: e3; Maximum Pulsed Drain Current (IDM): 60 A;
IRFB4115PBF
IRFB4115PBF by Infineon is a N-CHANNEL Power FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 420A and EAS of 830mJ, making it suitable for high-power operations. With an operating temperature up to 175°C and 0.011 ohm RDS(on), this transistor offers reliable performance in various industrial settings.
IRFR4104TRPBF
IRFR4104TRPBF by Infineon Technologies is a N-CHANNEL Power FET with 40V DS Breakdown Voltage and 42A Drain Current. It is used for SWITCHING applications, featuring a built-in DIODE, 480A Pulsed Drain Current, and 145mJ Avalanche Energy Rating. Ideal for surface mount designs in power electronics.
IRFL9014PBF
Vishay Intertechnology's IRFL9014PBF is a N-CHANNEL Power FET with 60V DS Breakdown Voltage and 14A IDM. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a PLASTIC/EPOXY package. Operating from -55 to 150 °C, it has 0.5 ohm Drain-Source On Resistance and 3.1W Max Power Dissipation.
PMV40UN2R
NXP Semiconductors
PMV40UN2R by NXP Semiconductors is a Power FET with N-CHANNEL polarity, suitable for SWITCHING applications. It features a 30V DS Breakdown Voltage, 16A IDM, and 0.044 ohm Drain-Source On Resistance. This SMALL OUTLINE transistor operates in an ENHANCEMENT MODE with a max temperature of 150 °C.
IRF7319TRPBF
N-CHANNEL AND P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Terminal Position: DUAL; Package Shape: RECTANGULAR;
BSC030P03NS3GAUMA1
BSC030P03NS3GAUMA1 by Infineon is a P-CHANNEL FET with 30V DS Breakdown Voltage, 200A IDM, and 0.0046 ohm RDS(ON). Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 125W. The transistor has a small outline package style and can withstand temperatures from -55 to 150 °C.
IRF640SPBF
Vishay Intertechnology's IRF640SPBF is a N-CHANNEL Power FET with 200V DS Breakdown Voltage and 72A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, operates in ENHANCEMENT MODE, and has a max power dissipation of 130W.
CSD18540Q5BT
Texas Instruments
CSD18540Q5BT by Texas Instruments is a N-CHANNEL FET for SWITCHING applications. It has a 60V DS Breakdown Voltage, 400A IDM, and 0.0033 ohm Drain-Source On Resistance. Operating in ENHANCEMENT MODE, it can handle temperatures from -55 to 175 °C.
PMV20ENR
PMV20ENR by NXP Semiconductors is an N-CHANNEL FET with a max drain current of 7.6A and power dissipation of 6.94W in enhancement mode. Ideal for applications requiring high-power handling, it operates at temperatures up to 150°C and features surface mount configuration for easy installation.
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
IRF540PBF
Vishay Intertechnology's IRF540PBF is a N-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features 110A IDM, 230mJ EAS, and 0.077 ohm RDS(ON). Operating in ENHANCEMENT MODE, it has a max power dissipation of 150W and can withstand temperatures up to 175°C.
IRFP460PBF
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Drain-Source On Resistance: .27 ohm; Avalanche Energy Rating (EAS): 960 mJ;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FDMC86139P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 40 W; Terminal Form: NO LEAD; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FDMC86139P by Onsemi is a P-CHANNEL Power FET with 100V DS Breakdown Voltage and 30A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 0.067 ohm RDS(on), and operates in ENHANCEMENT MODE.
FDMC5614P
FDMC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage and 23A IDM. Ideal for SWITCHING applications, it features SINGLE configuration with BUILT-IN DIODE in a SQUARE PLASTIC/EPOXY package. Operating in ENHANCEMENT MODE, it has a max power dissipation of 6W at 150°C.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 6 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; JESD-30 Code: S-PDSO-F5;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 41 W; No. of Terminals: 5; Peak Reflow Temperature (C): 260;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 41 W; Maximum Time At Peak Reflow Temperature (s): 30; Package Body Material: PLASTIC/EPOXY;
FDMC86102L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 41 W; Maximum Drain Current (Abs) (ID): 30 A; Minimum DS Breakdown Voltage: 100 V;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 41 W; Transistor Application: SWITCHING; JESD-30 Code: S-PDSO-N5;
FDMC8622
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 31 W; Operating Mode: ENHANCEMENT MODE; Package Body Material: PLASTIC/EPOXY;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 31 W; Terminal Finish: NICKEL PALLADIUM GOLD; Maximum Operating Temperature: 150 Cel;
FDMC2523P
FDMC2523P by Onsemi is a P-CHANNEL Power FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max Drain Current of 3A, Max Power Dissipation of 25W, and ON Resistance of 1.5 ohm. This MOSFET operates in ENHANCEMENT MODE and has a max temperature rating of 150°C, suitable for various electronic designs requiring high power efficiency.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 25 W; Terminal Form: FLAT; Minimum DS Breakdown Voltage: 150 V;
FDMC3612
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 35 W; Case Connection: DRAIN; Minimum DS Breakdown Voltage: 100 V;
FDMC86260
FDMC86260 by Onsemi is a N-CHANNEL Power FET with 150V DS Breakdown Voltage and 48A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 0.034 ohm RDS(on), and 121mJ EAS rating. Operating in ENHANCEMENT MODE, this transistor has a max power dissipation of 54W in a SMALL OUTLINE package.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 54 W; Transistor Application: SWITCHING; No. of Terminals: 5;
FDMC8360LET40
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 75 W; Maximum Drain-Source On Resistance: .0021 ohm; Operating Mode: ENHANCEMENT MODE;
FDMC8360LET40 by Onsemi is an N-CHANNEL Power FET with 40V DS Breakdown Voltage and 658A Pulsed Drain Current. Ideal for SWITCHING applications, it features a built-in diode, 0.0021 ohm Drain-Source Resistance, and operates in ENHANCEMENT MODE.
FDMC010N08C
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 52 W; Operating Mode: ENHANCEMENT MODE; No. of Elements: 1;
FDMC86259P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 62 W; Maximum Drain Current (Abs) (ID): 3.2 A; Transistor Application: SWITCHING;
FDMC3020DC
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 50 W; Maximum Drain Current (Abs) (ID): 40 A; Case Connection: DRAIN;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved