Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FDMC2523P by Onsemi is a P-CHANNEL Power FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max Drain Current of 3A, Max Power Dissipation of 25W, and ON Resistance of 1.5 ohm. This MOSFET operates in ENHANCEMENT MODE and has a max temperature rating of 150°C, suitable for various electronic designs requiring high power efficiency.
Median Price
$1.550
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Farnell
1+ parts
$1.170
100+ parts
$0.715
1k+ parts
$0.555
10k+ parts
$0.536
Newark
$0.792
$0.633
-
Mouser Electronics
$2.270
$1.070
DigiKey
$2.490
$1.088
$0.800
Chip1Stop
$4.770
$2.000
$1.280
Arrow
$0.772
Verical
$0.647
Adafruit Industries
Nova Conductors
$0.825
Digiode
$1.349
TME
$2.040
$1.020
$0.810
Martec Srl
Chip Stock
Velocity Electronics
Vyrian
Bristol Electronics
IBS Electronics
$1.318
Sensible Micro Corp
Cyclops Electronics Ltd
A2Z Electronics, Inc.
Microfarads
Prism Electronics
NexGen Digital
Corohmni
$0.279
Component Stockers USA
$0.390
$0.310
$0.280
Ampacity Inc.
$0.550
Semicontronic
$0.534
Aztec Data Supply Inc.
$0.579
Argo Parts USA
Continental Prestige Electronics
$0.808
Corphita
$1.278
Modulus Dynamics
$1.459
Microchip USA
$4.809
Andel Nordic
$7.530
$7.228
iodParts Technologies Inc.
Perfect Parts
Robosynatics
$0.597
$0.585
Lucentia Tech
Kepictronics
GreenTree Electronics
Lixinc
Authorized Procurement Solutions
Problanco Electronics
Glotronic Ltd.
Kulean Microsystems
SupplyDigital Components
TANS Electronics
Assy Fe
Netroflash
$0.784
$0.767
UHIMA Technologies
Supply Digital
Formix International (Excess)
Futuretech Components
Advanced Electronics
This material provides durability and reliability for the product, ensuring it can withstand various environmental conditions.
P-channel FETs allow for easier control of the flow of current, making them suitable for switching applications.
Having a built-in diode simplifies circuit design and can improve overall efficiency in switching applications.
Designed specifically for switching applications, this FET can provide efficient and reliable performance in controlling power flow.
Surface mount capability allows for easy integration into electronic circuit boards, saving space and simplifying assembly processes.
With a high breakdown voltage, this FET can handle high voltages, making it suitable for a wide range of applications.
The high maximum pulsed drain current allows for handling of peak current demands, ensuring reliable performance under varying load conditions.
With a high maximum power dissipation, this FET can effectively dissipate heat generated during operation, preventing overheating and ensuring long-term reliability.
Operating at a high temperature range allows for use in demanding environments without sacrificing performance or reliability.
Low on-resistance results in reduced power losses and improved efficiency in switching applications.
Power Field Effect Transistors (FET) FDMC2523P attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
FDMC2523P Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MBRS1100T3G
Onsemi
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Dc Components
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
Infineon Technologies
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
FDS6675BZ
FDS6675BZ by Onsemi is a P-CHANNEL Power FET with 30V DS Breakdown Voltage and 55A IDM. Ideal for SWITCHING applications, it features SINGLE configuration with BUILT-IN DIODE in a RECTANGULAR package. Operating in ENHANCEMENT MODE, it offers low 0.013 ohm Drain-Source On Resistance and can handle up to 2.5W power dissipation.
FQP30N06L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 79 W; Qualification: Not Qualified; JESD-609 Code: e3;
STH2N120K5-2AG
Power Field-Effect Transistors; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Peak Reflow Temperature (C): 245; Terminal Finish: MATTE TIN;
JANTX2N6796
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 25 W; Transistor Application: SWITCHING; Operating Mode: ENHANCEMENT MODE;
IRFR4104TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 140 W; JESD-30 Code: R-PSSO-G2; Maximum Drain-Source On Resistance: .0055 ohm;
RJK0651DPB-00-J5
Renesas Electronics
Renesas Electronics RJK0651DPB-00-J5 is a N-CHANNEL FET with 60V DS Breakdown Voltage, 100A IDM, and 0.018 ohm RDS. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE at up to 150°C, making it suitable for high-power tasks.
IRFR9024PBF
P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Maximum Power Dissipation Ambient: 42 W; No. of Terminals: 2;
IRFH5015TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 250 W; No. of Elements: 1; JESD-609 Code: e3;
BSC160N15NS5ATMA1
BSC160N15NS5ATMA1 by Infineon is a N-CHANNEL Power FET with 150V DS Breakdown Voltage. Ideal for SWITCHING applications, it features a max IDM of 224A and 0.016 ohm Drain-Source On Resistance. The transistor's METAL-OXIDE SEMICONDUCTOR technology and SILICON material make it reliable for high-power operations.
IRF9640STRLPBF
Vishay Intertechnology's IRF9640STRLPBF is a P-CHANNEL FET with 200V DS breakdown voltage and 44A pulsed drain current. Ideal for switching applications, it operates in enhancement mode with 0.5 ohm on-resistance and 125W power dissipation.
SPW47N60C3
SPW47N60C3 by Infineon Technologies is a N-CHANNEL Power FET with 600V DS Breakdown Voltage. It features a Max Drain Current of 47A and 0.07 ohm On Resistance, suitable for high-power applications. Ideal for use in power supplies, motor control, and industrial equipment due to its high current handling capabilities.
IRF740APBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; JEDEC-95 Code: TO-220AB; Terminal Position: SINGLE; Transistor Application: SWITCHING;
IRF4905STRLPBF
IRF4905STRLPBF by Infineon is a P-CHANNEL FET with 55V DS Breakdown Voltage, 280A IDM, and 0.02 ohm RDS. It's used for SWITCHING applications in ENHANCEMENT MODE at -55 to 150 °C, with 170W power dissipation.
FQB12P20TM
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 120 W; Package Shape: RECTANGULAR; JESD-609 Code: e3;
IRFL9014TRPBF-BE3
Vishay Intertechnology's IRFL9014TRPBF-BE3 is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 14A IDM and 140mJ EAS, suitable for high-power operations. With a compact GULL WING package style and -55 to 150 °C operating temperature range, it offers reliable performance in various electronic devices.
AUIRF5210STRL
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 170 W; Maximum Pulsed Drain Current (IDM): 140 A; Transistor Element Material: SILICON;
IRF840SPBF
Vishay Intertechnology's IRF840SPBF is a N-CHANNEL FET with 500V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 32A IDM, 510mJ EAS, and 0.85 ohm RDS(on). Operating in ENHANCEMENT MODE, it has a max power dissipation of 125W and can withstand up to 150°C.
IRF7425TRPBF-1
IRF7425TRPBF-1 by Infineon is a P-channel Power FET with 20V DS breakdown voltage, 15A max drain current, and 0.0082 ohm RDS(on). It's used in power management applications due to its small outline package, 60A pulsed drain current, and -55 to +150°C operating temperature range.
IRF7759L2TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 125 W; Package Shape: RECTANGULAR; No. of Elements: 1;
IPZ40N04S5L2R8ATMA1
Infineon's IPZ40N04S5L2R8ATMA1 is a N-CHANNEL FET with 40V DS Breakdown Voltage, 160A IDM, and 0.0038 ohm RDS(ON). Ideal for automotive applications due to AEC-Q101 standard compliance.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FDMC86139P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 40 W; Terminal Form: NO LEAD; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FDMC86139P by Onsemi is a P-CHANNEL Power FET with 100V DS Breakdown Voltage and 30A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 0.067 ohm RDS(on), and operates in ENHANCEMENT MODE.
FDMC5614P
FDMC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage and 23A IDM. Ideal for SWITCHING applications, it features SINGLE configuration with BUILT-IN DIODE in a SQUARE PLASTIC/EPOXY package. Operating in ENHANCEMENT MODE, it has a max power dissipation of 6W at 150°C.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 6 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; JESD-30 Code: S-PDSO-F5;
FDMC86102LZ
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 41 W; No. of Terminals: 5; Peak Reflow Temperature (C): 260;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 41 W; Maximum Time At Peak Reflow Temperature (s): 30; Package Body Material: PLASTIC/EPOXY;
FDMC86102L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 41 W; Maximum Drain Current (Abs) (ID): 30 A; Minimum DS Breakdown Voltage: 100 V;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 41 W; Transistor Application: SWITCHING; JESD-30 Code: S-PDSO-N5;
FDMC8622
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 31 W; Operating Mode: ENHANCEMENT MODE; Package Body Material: PLASTIC/EPOXY;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 31 W; Terminal Finish: NICKEL PALLADIUM GOLD; Maximum Operating Temperature: 150 Cel;
FDMC2523P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 25 W; Terminal Form: FLAT; Minimum DS Breakdown Voltage: 150 V;
FDMC3612
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 35 W; Case Connection: DRAIN; Minimum DS Breakdown Voltage: 100 V;
FDMC3612 by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 15A and EAS of 32mJ, suitable for ENHANCEMENT MODE operation. With a Drain Current of 16A and 0.11 ohm RDS(on), this transistor offers high performance in a SMALL OUTLINE package.
FDMC86260
FDMC86260 by Onsemi is a N-CHANNEL Power FET with 150V DS Breakdown Voltage and 48A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 0.034 ohm RDS(on), and 121mJ EAS rating. Operating in ENHANCEMENT MODE, this transistor has a max power dissipation of 54W in a SMALL OUTLINE package.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 54 W; Transistor Application: SWITCHING; No. of Terminals: 5;
FDMC8360LET40
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 75 W; Maximum Drain-Source On Resistance: .0021 ohm; Operating Mode: ENHANCEMENT MODE;
FDMC8360LET40 by Onsemi is an N-CHANNEL Power FET with 40V DS Breakdown Voltage and 658A Pulsed Drain Current. Ideal for SWITCHING applications, it features a built-in diode, 0.0021 ohm Drain-Source Resistance, and operates in ENHANCEMENT MODE.
FDMC010N08C
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 52 W; Operating Mode: ENHANCEMENT MODE; No. of Elements: 1;
FDMC86259P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 62 W; Maximum Drain Current (Abs) (ID): 3.2 A; Transistor Application: SWITCHING;
FDMC2674
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.4 W; No. of Elements: 1; Maximum Time At Peak Reflow Temperature (s): 30;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved