Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FDMC8622 by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 30A and EAS of 37mJ, operating in ENHANCEMENT MODE. With a package style of SMALL OUTLINE and 0.056 ohm RDS(on), it offers high performance in compact designs.
Median Price
$1.681
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Farnell
1+ parts
$1.505
100+ parts
$1.018
1k+ parts
$0.722
10k+ parts
$0.673
Element14
$1.056
$0.739
$0.644
Chip1Stop
$1.790
$0.940
$0.705
$0.583
Mouser Electronics
$2.420
$1.060
$0.775
-
DigiKey
Newark
$2.490
$1.090
$0.797
Arrow
$0.600
Verical
$0.836
$0.745
Rochester
$0.846
$0.702
$0.626
Digiode
Nova Conductors
$1.005
Chip Stock
Vyrian
Flip Electronics
Bristol Electronics
Semicontronic
$0.510
$0.497
$0.495
Ampacity Inc.
Corphita
$0.593
Corohmni
$0.659
Argo Parts USA
Aztec Data Supply Inc.
$0.855
Bastille Electronics
$0.955
$0.907
$0.894
Perfect Parts
Lixinc
QUARKTWIN TECHNOLOGY LTD
Futuretech Components
Problanco Electronics
Microchip USA
Kulean Microsystems
Kepictronics
Continental Prestige Electronics
$0.851
$0.625
Formix International (Excess)
Infinite Electronics LLP (Excess)
GreenTree Electronics
Eastek
S.R.D Solutions
Authorized Procurement Solutions
Supply Digital
Advanced Electronics
TANS Electronics
SupplyDigital Components
UHIMA Technologies
Provides good insulation and protection for the components inside, ensuring long-term durability.
N-Channel FETs typically have better performance and efficiency compared to P-Channel FETs, making them suitable for various applications.
The built-in diode allows for more efficient switching and protection against voltage spikes.
Designed specifically for switching applications, ensuring fast and efficient performance.
Allows for easy and secure mounting on a PCB, saving space and simplifying the assembly process.
A high breakdown voltage allows for operation in high voltage circuits, making this FET suitable for a wide range of applications.
Can handle high current pulses effectively, making it suitable for applications with varying loads.
With a high power dissipation rating, this FET can handle large amounts of power without overheating.
Can operate at higher temperatures without performance degradation, suitable for industrial and automotive applications.
Power Field Effect Transistors (FET) FDMC8622 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Additional Features:
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
FDMC8622 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
Transys Electronics
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603JR-070RL
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
Frontier Electronics
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
Surge Components
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
AUIRFN8459TR
Infineon Technologies
AUIRFN8459TR by Infineon Technologies is a N-CHANNEL Power FET with 40V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 320A IDM, 66mJ EAS, and 0.0059 ohm Drain-Source On Resistance. This SMALL OUTLINE transistor has DUAL terminals and AEC-Q101 standard compliance.
IRLML0030TRPBF
Infineon's IRLML0030TRPBF is a N-CHANNEL FET with 30V DS Breakdown Voltage and 5.3A Drain Current. Ideal for SWITCHING applications, it features a built-in diode, 1.3W Power Dissipation, and operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150 °C.
CSD18540Q5BT
Texas Instruments
CSD18540Q5BT by Texas Instruments is a N-CHANNEL FET for SWITCHING applications. It has a 60V DS Breakdown Voltage, 400A IDM, and 0.0033 ohm Drain-Source On Resistance. Operating in ENHANCEMENT MODE, it can handle temperatures from -55 to 175 °C.
AUIRF7759L2TR
AUIRF7759L2TR by Infineon is a N-CHANNEL FET with 75V DS Breakdown Voltage and 640A Pulsed Drain Current. Ideal for SWITCHING applications, it features a built-in diode, 0.0023 ohm On Resistance, and operates in ENHANCEMENT MODE.
NDT3055L_NL
Fairchild Semiconductor
Fairchild Semiconductor's NDT3055L_NL is a Power FET with N-CHANNEL polarity, suitable for SWITCHING applications. It features a 60V DS Breakdown Voltage, 25A IDM, and 0.1 ohm RDS(on). The transistor operates in ENHANCEMENT MODE with a max temp of 150°C, making it ideal for high-power switching circuits.
FDS2582
Onsemi
FDS2582 by Onsemi is a N-CHANNEL Power FET with 150V DS Breakdown Voltage. It features a built-in diode, 4.1A Drain Current, and 0.066 ohm On Resistance. Ideal for SWITCHING applications, this transistor operates in ENHANCEMENT MODE with an EAS of 252mJ and can handle up to 2.5W power dissipation.
ZXMP6A17GTA
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3.9 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Minimum DS Breakdown Voltage: 60 V;
IRF3205LPBF
International Rectifier
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 200 W; Peak Reflow Temperature (C): 260; No. of Elements: 1;
NDT3055L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY;
BS170
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): .83 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; No. of Elements: 1;
BSP295H6327XTSA1
BSP295H6327XTSA1 by Infineon is a N-CHANNEL FET with 60V DS breakdown voltage and 7.2A max pulsed drain current. It is used in enhancement mode applications, featuring a built-in diode, 0.5 ohm max RDS(on), and AEC-Q101 standard compliance for automotive electronics.
SI7113ADN-T1-GE3
Vishay Intertechnology
SI7113ADN-T1-GE3 by Vishay Intertechnology is a P-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 20A IDM, 11.25mJ EAS, and 0.132 ohm Drain-Source On Resistance. Operating from -55 to 150 °C, it has a DUAL Terminal Position and DRAIN Case Connection.
BSC060N10NS3GATMA1/SAMPLE
BSC060N10NS3GATMA1/SAMPLE by Infineon is a N-CHANNEL FET with PLASTIC/EPOXY package, ideal for SWITCHING applications. It features SINGLE configuration with built-in DIODE and METAL-OXIDE SEMICONDUCTOR technology. This 8-terminal transistor has RECTANGULAR shape, DUAL position terminals, and DRAIN case connection for surface mount use.
IRLL014NTRPBF
IRLL014NTRPBF by Infineon Technologies is a N-CHANNEL Power FET with 55V DS Breakdown Voltage and 16A IDM. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a PLASTIC/EPOXY package. Operating in ENHANCEMENT MODE, it has an EAS of 32mJ and 0.14 ohm Drain-Source On Resistance.
FDS3890
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
IRF3205STRLPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 200 W; Minimum DS Breakdown Voltage: 55 V; Additional Features: AVALANCHE RATED, HIGH RELIABILITY, ULTRA LOW RESISTANCE;
FQP30N06L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 79 W; Qualification: Not Qualified; JESD-609 Code: e3;
IRF9530
Samsung
P-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 88 W; Qualification: Not Qualified; Transistor Application: SWITCHING;
IRF9530NPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 79 W; Maximum Drain-Source On Resistance: .2 ohm; Maximum Pulsed Drain Current (IDM): 56 A;
SI7149ADP-T1-GE3
SI7149ADP-T1-GE3 by Vishay Intertechnology is a P-CHANNEL FET with 30V DS Breakdown Voltage, 300A IDM, and 0.0052 ohm RDS(ON). Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation. Package style is SMALL OUTLINE with DUAL terminals and DRAIN case connection.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FDMC86139P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 40 W; Terminal Form: NO LEAD; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FDMC86139P by Onsemi is a P-CHANNEL Power FET with 100V DS Breakdown Voltage and 30A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 0.067 ohm RDS(on), and operates in ENHANCEMENT MODE.
FDMC5614P
FDMC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage and 23A IDM. Ideal for SWITCHING applications, it features SINGLE configuration with BUILT-IN DIODE in a SQUARE PLASTIC/EPOXY package. Operating in ENHANCEMENT MODE, it has a max power dissipation of 6W at 150°C.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 6 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; JESD-30 Code: S-PDSO-F5;
FDMC86102LZ
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 41 W; No. of Terminals: 5; Peak Reflow Temperature (C): 260;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 41 W; Maximum Time At Peak Reflow Temperature (s): 30; Package Body Material: PLASTIC/EPOXY;
FDMC86102L
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 41 W; Maximum Drain Current (Abs) (ID): 30 A; Minimum DS Breakdown Voltage: 100 V;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 41 W; Transistor Application: SWITCHING; JESD-30 Code: S-PDSO-N5;
FDMC8622
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 31 W; Operating Mode: ENHANCEMENT MODE; Package Body Material: PLASTIC/EPOXY;
FDMC2523P
FDMC2523P by Onsemi is a P-CHANNEL Power FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max Drain Current of 3A, Max Power Dissipation of 25W, and ON Resistance of 1.5 ohm. This MOSFET operates in ENHANCEMENT MODE and has a max temperature rating of 150°C, suitable for various electronic designs requiring high power efficiency.
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 25 W; Terminal Form: FLAT; Minimum DS Breakdown Voltage: 150 V;
FDMC3612
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 35 W; Case Connection: DRAIN; Minimum DS Breakdown Voltage: 100 V;
FDMC3612 by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max IDM of 15A and EAS of 32mJ, suitable for ENHANCEMENT MODE operation. With a Drain Current of 16A and 0.11 ohm RDS(on), this transistor offers high performance in a SMALL OUTLINE package.
FDMC86260
FDMC86260 by Onsemi is a N-CHANNEL Power FET with 150V DS Breakdown Voltage and 48A IDM. Ideal for SWITCHING applications, it features a built-in DIODE, 0.034 ohm RDS(on), and 121mJ EAS rating. Operating in ENHANCEMENT MODE, this transistor has a max power dissipation of 54W in a SMALL OUTLINE package.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 54 W; Transistor Application: SWITCHING; No. of Terminals: 5;
FDMC8360LET40
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 75 W; Maximum Drain-Source On Resistance: .0021 ohm; Operating Mode: ENHANCEMENT MODE;
FDMC8360LET40 by Onsemi is an N-CHANNEL Power FET with 40V DS Breakdown Voltage and 658A Pulsed Drain Current. Ideal for SWITCHING applications, it features a built-in diode, 0.0021 ohm Drain-Source Resistance, and operates in ENHANCEMENT MODE.
FDMC010N08C
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 52 W; Operating Mode: ENHANCEMENT MODE; No. of Elements: 1;
FDMC86259P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 62 W; Maximum Drain Current (Abs) (ID): 3.2 A; Transistor Application: SWITCHING;
FDMC8678S
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 41 W; Minimum DS Breakdown Voltage: 30 V; JESD-30 Code: R-PDSO-N5;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved