Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FDD3860 by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. Featuring a max IDM of 60A and EAS of 121mJ, this ENHANCEMENT MODE transistor has a 0.036 ohm Drain-Source Resistance. Its GULL WING terminals and SMALL OUTLINE package make it suitable for surface mount designs in various electronic systems.
Median Price
$0.591
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Arrow
1+ parts
$0.475
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$0.741
Mouser Electronics
$1.460
$0.722
$0.523
$0.451
Future Electronics
Rochester
$0.491
$0.438
Digiode
$0.425
Vyrian
$0.447
TME
$0.860
$0.650
Component Electronics Inc.
$3.850
$2.880
$2.500
Ozdisan Elektronik
$47.048
Chip Stock
Connector Distribution Corp
Right Parts Inc.
NAC Semi
$0.610
Carlin Systems, Inc.
Bristol Electronics
Atlantic Semiconductor
Flip Electronics
North Shore Components
South Electronics
Inventory MP
Prism Electronics
Native Components
$0.083
$0.080
Northwest PG Solutions
$0.091
Corphita
$0.402
Corohmni
Perfect Parts
Metaverse IC Inc.
GreenTree Electronics
Kepictronics
Microchip USA
QUARKTWIN TECHNOLOGY LTD
Lixinc
Assy Fe
TANS Electronics
SupplyDigital Components
Supply Digital
iodParts Technologies Inc.
Kulean Microsystems
Authorized Procurement Solutions
Problanco Electronics
UHIMA Technologies
This material provides good insulation properties and is cost-effective, making the product more durable and affordable.
N-channel FETs typically have higher mobility and faster switching speeds, making them suitable for high-performance applications.
The built-in diode helps protect the circuit from transient voltages and enhances the overall efficiency of the switching operation.
Designed specifically for switching applications, this FET can handle high current and voltage demands effectively.
Surface mount technology allows for easy and efficient PCB assembly, saving space and reducing overall production costs.
With a high breakdown voltage, this FET can safely operate at higher voltages without risk of damage.
Low on-resistance results in reduced power losses and improved efficiency in the circuit.
With a high power dissipation rating, this FET can handle high power loads without overheating.
The FET can operate efficiently at high temperatures, ensuring reliability in challenging environments.
Power Field Effect Transistors (FET) FDD3860 attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
FDD3860 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Design/Specification - Logo 17/Aug/2017 Description Chg 01/Apr/2016
PCN Assembly/Origin - Multi Dev 29/Sep/2022
PCN Packaging - Mult Devices 24/Oct/2017 Tape and Box/Reel Barcode Update 07/Aug/2014
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SMBJ18CA
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
Unitrode
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
General Diode
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
Zetex Plc
Diodes Incorporated
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
1554216004
Molex
WIRE AND CABLE;
Semitronics
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
IRFP4668PBF
Infineon Technologies
IRFP4668PBF by Infineon is a N-CHANNEL Power FET with 200V DS Breakdown Voltage. It has a max IDM of 520A and EAS of 760mJ, suitable for SWITCHING applications. With 0.0097 ohm RDS(on) and 520W Pdiss, it operates in ENHANCEMENT MODE at up to 175°C.
FQT4N20LTF
Onsemi
FQT4N20LTF by Onsemi is a N-CHANNEL Power FET with 200V DS Breakdown Voltage, ideal for SWITCHING applications. It features a Max Pulsed Drain Current of 3.4A and Avalanche Energy Rating of 52mJ. With ENHANCEMENT MODE operation and small outline package style, it offers efficient performance in various electronic devices.
IRLML9303TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.25 W; Package Body Material: PLASTIC/EPOXY; Transistor Application: SWITCHING;
IRFZ44NS
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 94 W; Maximum Drain Current (ID): 49 A; Terminal Position: SINGLE;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
FQP27P06
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 120 W; Operating Mode: ENHANCEMENT MODE; Terminal Position: SINGLE;
FQD3P50TM
FQD3P50TM by Onsemi is a P-CHANNEL Power FET with 500V DS Breakdown Voltage, ideal for SWITCHING applications. It features 8.4A Max Pulsed Drain Current, 250mJ Avalanche Energy Rating, and 4.9 ohm Max Drain-Source Resistance. This ENHANCEMENT MODE transistor operates at up to 150°C and has a compact SMALL OUTLINE package style for efficient power dissipation.
FDBL86062-F085
FDBL86062-F085 by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 300A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, operates in ENHANCEMENT MODE, and has a max power dissipation of 429W.
IRLML6401PBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Maximum Feedback Capacitance (Crss): 125 pF; Peak Reflow Temperature (C): 260;
IRF640
First Components International
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Maximum Drain Current (Abs) (ID): 18 A; Operating Mode: ENHANCEMENT MODE;
FDB035N10A
FDB035N10A by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage. It features 120A Max Drain Current, 0.0035 ohm Max RDS(on), and 333W Max Power Dissipation. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a built-in DIODE, suitable for high-power requirements.
STP40NF10L
STP40NF10L by STMicroelectronics is a N-CHANNEL FET with 100V DS Breakdown Voltage, 160A IDM, and 0.036 ohm RDS(on). Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE at up to 175°C temperature.
FDS8984
FDS8984 by Onsemi is a N-CHANNEL Power FET with 30V DS Breakdown Voltage and 32mJ Avalanche Energy Rating. Ideal for SWITCHING applications, it features a SEPARATE configuration with 2 ELEMENTS and BUILT-IN DIODE. This small outline transistor has a max operating temperature of 150°C and can handle up to 30A pulsed drain current.
Harris Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Maximum Turn Off Time (toff): 122 ns; Transistor Element Material: SILICON;
IPB017N10N5LFATMA1
Infineon's IPB017N10N5LFATMA1 is a N-CHANNEL FET with 100V DS Breakdown Voltage, 720A IDM, and 0.0017 ohm RDS(on). Ideal for power applications requiring high current handling and low on-resistance. Suitable for use in power supplies, motor control, and automotive systems due to its high power dissipation of 313W and wide operating temperature range (-55 to 150 °C).
IRF9Z34NSTRLPBF
IRF9Z34NSTRLPBF by Infineon Technologies is a P-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 68A and 0.1 ohm RDS(ON), suitable for ENHANCEMENT MODE operation in various electronic devices. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, making it easy to mount on PCBs.
BSC160N15NS5ATMA1
BSC160N15NS5ATMA1 by Infineon is a N-CHANNEL Power FET with 150V DS Breakdown Voltage. Ideal for SWITCHING applications, it features a max IDM of 224A and 0.016 ohm Drain-Source On Resistance. The transistor's METAL-OXIDE SEMICONDUCTOR technology and SILICON material make it reliable for high-power operations.
AUIRF540Z
AUIRF540Z by Infineon Technologies is a N-CHANNEL FET with 100V DS breakdown voltage, ideal for switching applications. It features 140A max pulsed drain current and 0.0265 ohm max drain-source resistance. Operating in enhancement mode, it has a 175°C max temp rating and 92W power dissipation capability.
FDS3672_NL
FDS3672_NL by Fairchild Semiconductor is a N-CHANNEL Power FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 7.5A Drain Current, 0.023 ohm On Resistance, and 150°C Operating Temperature. Package: PLASTIC/EPOXY, GULL WING terminals in RECTANGULAR shape.
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Minimum DS Breakdown Voltage: 200 V; JESD-30 Code: R-PSFM-T3; Package Body Material: PLASTIC/EPOXY;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FDD390N15ALZ
FDD390N15ALZ by Onsemi is a N-CHANNEL Power FET with 150V DS Breakdown Voltage, 104A IDM, and 0.042 ohm RDS(on). Ideal for SWITCHING applications, it features a SINGLE configuration with built-in diode in a PLASTIC/EPOXY package. Operating at up to 150°C, this MOSFET offers high power dissipation of 63W.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 63 W; Maximum Pulsed Drain Current (IDM): 104 A; Transistor Element Material: SILICON;
FDD3N50NZTM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 40 W; Moisture Sensitivity Level (MSL): 1; No. of Elements: 1;
FDD3N50NZTM by Onsemi is a N-CHANNEL Power FET with 500V DS Breakdown Voltage and 2.5A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, 10A Pulsed Drain Current, and 40W Power Dissipation in a small outline package.
FDD3672
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 135 W; Maximum Drain Current (ID): 6.5 A; Terminal Form: GULL WING;
FDD3672 by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 6.5A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, 0.028 ohm On Resistance, and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, this transistor has a max power dissipation of 135W in a RECTANGULAR package style.
FDD3680
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 60 W; Transistor Element Material: SILICON; Peak Reflow Temperature (C): 260;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 60 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
FDD390N15A
FDD390N15A by Onsemi is a N-CHANNEL Power FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 104A and 0.04 ohm Drain-Source On Resistance, operating in ENHANCEMENT MODE at up to 150°C. This PLASTIC/EPOXY package with GULL WING terminals offers a compact solution for high-power requirements.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 63 W; Case Connection: DRAIN; JESD-609 Code: e3;
FDD3706
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 44 W; Transistor Application: SWITCHING; Peak Reflow Temperature (C): 260;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 44 W; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
FDD3670
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Qualification: Not Qualified; Maximum Operating Temperature: 175 Cel;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Minimum DS Breakdown Voltage: 100 V; Peak Reflow Temperature (C): 260;
FDD3510H
N-CHANNEL AND P-CHANNEL; Configuration: COMMON DRAIN, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 35 W; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY;
N-CHANNEL AND P-CHANNEL; Configuration: COMMON DRAIN, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 35 W; Terminal Position: SINGLE; JEDEC-95 Code: TO-252;
FDD3672-F085
FDD3672-F085 by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage, 44A Drain Current, and 0.028 ohm On Resistance. Ideal for SWITCHING applications in automotive (AEC-Q101) due to its 144W Power Dissipation, -55 to 175 °C Operating Temperature range, and ENHANCEMENT MODE operation.
FDD3672_F085
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 144 W; Terminal Position: SINGLE; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FDD3N40TM
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 30 W; No. of Terminals: 2; JESD-30 Code: R-PSSO-G2;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 30 W; Transistor Element Material: SILICON; Operating Mode: ENHANCEMENT MODE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved