Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FAN7318AMX by Onsemi is a Graphics Display Driver with 16 terminals, operating voltage range of 6-30V, and temp. range of -25 to 85 °C. It is used in Liquid Crystal Displays for driving graphics and supports surface mount installation.
Median Price
$0.617
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.595
1k+ parts
$0.493
10k+ parts
$0.440
DigiKey
$0.740
Verical
$0.550
Digiode
$0.463
Vyrian
$0.487
Euro-Tech
ComSIT Distribution GmbH
ACDS - Activité Composants Distribution Service
Bristol Electronics
$0.613
$0.458
Dan-Mar Components
Corphita
$0.438
Corohmni
Perfect Parts
TANS Electronics
Problanco Electronics
SupplyDigital Components
Kulean Microsystems
Microchip USA
Supply Digital
Authorized Procurement Solutions
Assy Fe
Northwest PG Solutions
$4.729
UHIMA Technologies
Native Components
$4.681
The use of plastic/epoxy material ensures a lightweight and durable package, making the product easy to handle and resistant to damage.
Being surface mountable allows for easy installation and integration onto circuit boards, saving space and improving overall design efficiency.
The high maximum supply voltage allows for compatibility with a wide range of power sources and ensures reliable performance under varying conditions.
The rectangular shape provides a standardized form factor for easy compatibility and installation in various systems.
Having 16 terminals allows for versatile connectivity options and enables the product to interface with multiple components efficiently.
The high maximum operating temperature ensures reliability and stability in harsh environments, making the product suitable for a wide range of applications.
The low minimum operating temperature allows the product to function effectively in cold conditions, enhancing its versatility and suitability for diverse environments.
The tin terminal finish provides excellent conductivity and solderability, ensuring reliable electrical connections and easy assembly during manufacturing.
The dual terminal position offers flexibility in circuit design and component placement, allowing for optimized performance and efficient routing of signals.
The narrow width of 3.9 mm saves space on the circuit board and enables a compact design, ideal for applications where size constraints are critical.
The nominal supply voltage of 15 V provides a stable power source for the product, ensuring consistent performance and optimal functionality.
The use of a liquid crystal display driver interface IC enhances display performance and efficiency, making the product ideal for graphics applications requiring high-resolution and quality visuals.
Graphics Display Drivers FAN7318AMX attributes and parameters. Explore more Graphics Display Drivers devices from Onsemi
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Multiplexed Display Capability:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
FAN7318AMX Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
1N4148
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Taitron Components
PCF2112CT/1,118
NXP Semiconductors
PCF2112CT/1,118 by NXP Semiconductors is a 40-terminal graphics display driver with dot matrix mode and serial data input. It operates in industrial temperature range (-40 to 85 °C) with a supply voltage of 2.25-6 V. Ideal for liquid crystal displays, it features small outline package style and Gull Wing terminal form.
LT3599EUH#TRPBF
Linear Technology
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
TPS92515HVDGQR
TPS92515HVDGQR by Texas Instruments is a LED display driver with 10 terminals, operating voltage range of 5.5V to 65V, and temperature grade suitable for automotive applications. It features small outline package style, dual terminal position, and nickel palladium gold silver finish. Ideal for graphics display drivers in automotive LED lighting systems.
FAN5640S7X
FAN5640S7X by Onsemi is a LED display driver with 4 segments, operating voltage range of 6-20V. It has a compact thin profile package suitable for industrial applications. With dual terminals and matte tin finish, it can handle temperatures from -40 to 85°C efficiently.
MM5450YV-TR
Microchip Technology
MM5450YV-TR by Microchip is a 5-DIGIT LED DISPLAY DRIVER with 34 segments, operating at 0.5 MHz. It has SERIAL data input mode and TRUE output polarity, suitable for industrial applications requiring segment display drivers. The chip carrier package style with 44 terminals makes it ideal for graphics displays in various electronic devices.
PTPS92200D2RXLR
The Texas Instruments PTPS92200D2RXLR is a LED display driver with 6 terminals, operating voltage range of 4-30V, and output in totem-pole configuration. It is designed for graphics displays, featuring small outline package style and dual terminal position for compact applications. With an operating temperature range of -40 to 85°C, it offers standard input characteristics and low supply current of 1mA.
LED1202QTR
LED1202QTR by STMicroelectronics is a graphics display driver with SERIAL data input mode and 20 terminals. It operates b/w -40 to 85 °C, with a supply voltage range of 2.6V to 5V. Ideal for LED display applications due to its compact square chip carrier package style and low supply current of 2mA.
MXHV9910BE
Ixys Integrated Circuits Division
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HSOP; Package Shape: RECTANGULAR;
TPS61161DRVRG4
TPS61161DRVRG4 by Texas Instruments is a graphics display driver with a max supply voltage of 18V. It has 1 channel and operates at an industrial temperature range of -40 to 85°C. This LED display driver is suitable for applications requiring a small outline, heat sink profile.
LP5521YQX/NOPB
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: RECTANGULAR;
CD4056BM
CD4056BM by Texas Instruments is a graphics display driver with 7 bits, operating at 5/15V. It features parallel data input mode and segment display mode for LCD drivers. Ideal for military-grade applications due to its CMOS technology and MIL temperature grade.
TPS54201DDCT
TPS54201DDCT by Texas Instruments is a LED display driver with 4 segments, operating at -40 to 125 °C. It has a supply voltage range of 4.5-28 V and comes in a small outline package suitable for automotive applications. The terminal finish is matte tin, with dual position terminals and gull wing form factor.
TPS61193PWPRQ1
TPS61193PWPRQ1 by Texas Instruments is a 20-terminal LED display driver with 3 channels, operating at -40 to 125°C. It supports a supply voltage range of 4.5-45V and features a GULL WING terminal form for automotive applications. With a package style of SMALL OUTLINE, HEAT SINK/SLUG, it is ideal for driving up to 6 segments with a min fmax of 0.02 MHz.
NCP5006SNT1G
NCP5006SNT1G by Onsemi is a graphics display driver with 5.5V max supply voltage, suitable for LED displays. It operates b/w -25 to 85°C, has 3/5V power supplies, and a small outline package style. Ideal for applications requiring compact design and efficient power management.
TLC5917IN
TLC5917IN by Texas Instruments is a graphics display driver with 16 terminals, operating voltage of 3-5.5 V, and constant-current output. It features serial data input mode for segment display applications. With a compact rectangular package style and automotive temperature grade, it is ideal for LED display driver interfaces in various electronic devices.
BU97981MUV-E2
ROHM
ROHM's BU97981MUV-E2 is a 56-terminal graphics display driver with 49 segments. It operates at temperatures from -30 to 70°C and supports power supplies of 2/3.3V to 5V. Ideal for liquid crystal displays, this chip carrier package is surface-mountable and features a segment display mode.
TPS61195RUYR
TPS61195RUYR by Texas Instruments is a graphics display driver with 8 channels, 96 segments, and serial data input mode. It operates in industrial temperature range (-40 to 85 °C) with a supply voltage of 4.5-21 V. Ideal for LED displays, it has a compact chip carrier package style suitable for surface mount applications.
IS31FL3731-SALS2-TR
Integrated Silicon Solution
IS31FL3731-SALS2-TR by Integrated Silicon Solution is a DOT MATRIX LED DISPLAY DRIVER with SERIAL data input mode. It operates b/w -40 to 85 °C and has 144 segments, suitable for industrial applications requiring high-quality graphics display drivers. The package style is SMALL OUTLINE, SHRINK PITCH with GULL WING terminals, making it ideal for compact designs.
LP3943ISQ/NOPB
Display Drivers; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: QCCN; Package Shape: SQUARE;
ICM7224IPL
Rochester Electronics
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 40; Package Shape: RECTANGULAR; Maximum Operating Temperature: 85 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FAN7711MX
FAN7711MX by Onsemi is a small outline graphics display driver with 8 terminals. It operates b/w -25 to 125°C, supporting a nominal voltage of 14V. Ideal for EL displays, it features nickel palladium gold terminal finish and Gull Wing form factor.
EL DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FAN7346MX
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR;
FAN7711N
EL DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FAN7711N by Onsemi is an EL display driver with 8 terminals, operating temperature range of -25 to 125 °C. Its package style is in-line rectangular shape made of plastic/epoxy material. Ideal for graphics display applications due to its nominal voltage of 14 V and compact dimensions (7.62mm x 9.805mm).
FAN7311N
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
FAN7317BM
LIQUID CRYSTAL DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY; Terminal Position: DUAL;
FAN7317BMX
LIQUID CRYSTAL DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Finish: MATTE TIN;
FAN7318AM
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
FAN7318BM
LIQUID CRYSTAL DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G20; Maximum Time At Peak Reflow Temperature (s): 30;
FAN7318BMX
LIQUID CRYSTAL DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE; Peak Reflow Temperature (C): 260;
FAN7319M
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
FAN7319MX
FAN7340MX
LED DISPLAY DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: NICKEL PALLADIUM GOLD; JESD-609 Code: e4; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
FAN7346M
FAN7711M
FAN7734MX
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
FAN7318M
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved