Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
EL DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$0.800
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.702
1k+ parts
$0.556
10k+ parts
$0.492
Chip1Stop
$3.610
$1.520
-
Adafruit Industries
$10.208
$9.289
$8.371
Rochester
$0.667
$0.554
$0.494
Verical
$0.692
$0.617
EBV Elektronik
Digiode
$0.519
Nova Conductors
$0.625
Vyrian
Chip Stock
Flip Electronics
ComSIT Distribution GmbH
Cyclops Electronics Ltd
Holdelec - ElecDif-Pro
ACDS - Activité Composants Distribution Service
Ampacity Inc.
$0.464
Semicontronic
$0.452
$0.450
Corphita
$0.491
Corohmni
$0.610
Aranea Global
$0.612
$0.588
Continental Prestige Electronics
Argo Parts USA
$0.606
Aztec Data Supply Inc.
$8.028
Advanced Electronics
Perfect Parts
GreenTree Electronics
RC Electronics
$0.640
$0.580
$0.560
Lixinc
Microchip USA
TANS Electronics
Kulean Microsystems
Problanco Electronics
SupplyDigital Components
iodParts Technologies Inc.
Cyclops Electronics Ltd (Excess)
Supply Digital
Kepictronics
UHIMA Technologies
Graphics Display Drivers FAN7711MX attributes and parameters. Explore more Graphics Display Drivers devices from Fairchild Semiconductor
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Multiplexed Display Capability:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
FAN7711MX Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.31.00.01
SB
8542.31.00.00
PCN Design/Specification - Datasheet Chg 11/Mar2016 Logo 17/Aug/2017
PCN Assembly/Origin - Mold Compound Change 21/Jul/2021
PCN Packaging - Mult Devices 24/Oct/2017 Mult MSL1 Pkg Rev 20/Dec/2018
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
LM317T
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
Cheng-yi Electronic
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Rectron
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Continental Device India
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Meritek Electronics
LM3414MR/NOPB
Texas Instruments
LM3414MR/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 42V and power supplies of 24V. It features constant-current output characteristics, making it ideal for automotive applications requiring LED display drivers. With a small outline package style and low profile, this IC is suitable for compact designs in harsh environments.
PCA9685PW,112
NXP Semiconductors
PCA9685PW,112 by NXP Semiconductors is a SERIAL LED DISPLAY DRIVER with 16 segments. It operates b/w -40 to 85 °C and supports a supply voltage range of 2.3-5.5 V. Ideal for industrial applications due to its small size and low power consumption.
ICM7224IPL+
Analog Devices
Analog Devices' ICM7224IPL+ is a 40-terminal graphics display driver with serial data input mode. It operates b/w -20 to 85 °C and supports liquid crystal displays with 29 segments. With a CMOS technology, it has a max supply voltage of 6V and min fmax of 15 MHz, making it ideal for various display applications.
MM5450YN
Micrel
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 40; Package Code: DIP; Package Shape: RECTANGULAR;
MAX16834AUP+T
Maxim Integrated
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: TSSOP; Package Shape: RECTANGULAR;
MAX6957AAI+
MAX6957AAI+ by Analog Devices is a Graphics Display Driver with 20 segments, 7-digit display mode, and serial data input. It operates at supply voltages of 2.5V to 5.5V and temperature range of -40°C to 125°C. Ideal for automotive applications due to its small outline package style and CMOS technology.
LT3497EDDB#TRMPBF
Analog Devices' LT3497EDDB#TRMPBF is a LED display driver with 10V max supply voltage, 2.5V min supply voltage, and -40 to 85°C operating temperature range. It comes in a small outline package ideal for industrial applications requiring compact design and efficient power management.
TLC5955DCA
TLC5955DCA by Texas Instruments is a graphics display driver with 48 channels and segments. It operates in segment display mode with serial data input, suitable for LED displays. The IC has a supply voltage range of 3V to 5.5V, industrial temperature grade, and small outline package style.
TLC6C598PWR
TLC6C598PWR by Texas Instruments is a graphics display driver with 8 channels, operating at 10 MHz. It features a serial data input mode and supports LED displays. With a small outline package style and industrial temperature grade, it's ideal for applications requiring high-speed data processing in compact spaces.
HV9910CLG-G
Supertex
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: HLSOP; Package Shape: RECTANGULAR;
LM3915N
National Semiconductor
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
MM5451YV-TR
MM5451YV-TR by Microchip Technology is a graphics display driver with a serial data input mode and 35 segments. It has a max supply voltage of 11V and is commonly used in LED display driver applications.
PCA9626B/S911,118
NXP Semiconductors' PCA9626B/S911,118 is a Graphics Display Driver with 48 terminals in a square flatpack package. It operates b/w -40°C to 85°C, suitable for industrial applications. With power supplies of 2.5/5V, it's ideal for surface mount designs requiring precise control and management of graphic displays.
LT3518IFE#PBF
LT3518IFE#PBF by Analog Devices is a LED display driver with 16 terminals, operating voltage range of 3-30V, and temperature grade suitable for automotive applications. It features a small outline package style, matte tin terminal finish, and gull wing terminal form. Ideal for graphics displays requiring high performance in harsh environments.
TLC59116IPWRG4
TLC59116IPWRG4 by Texas Instruments is a LED display driver with 16 segments, operating voltage range of 3-5.5V, and serial data input mode. Ideal for industrial applications, it comes in a small outline package with 28 terminals and can withstand temperatures from -40 to 85°C.
MAX6962ATH
MAX6962ATH by Maxim Integrated is a graphics display driver with dot matrix display mode and serial data input. It operates at 2.7-3.6V, has 44 terminals in a square package, and supports multiplexed displays. Ideal for automotive applications due to its BICMOS technology and LED display driver interface IC type.
TPS61161DRVTG4
TPS61161DRVTG4 by Texas Instruments is a graphics display driver with 6 terminals, operating voltage range of 2.7V to 18V, and low supply current of 1.8mA. Ideal for LED display driver applications due to its small outline package style and industrial temperature grade suitability.
TLC5916IDRG4
TLC5916IDRG4 by Texas Instruments is a graphics display driver with 16 terminals, operating voltage of 3-5.5V, and constant-current output. It is used in automotive applications for segment display mode with serial data input at temperatures ranging from -40 to 125°C.
TPS61161ADRVR
TPS61161ADRVR by Texas Instruments is a LED display driver with 6 terminals, operating voltage range of 2.7V to 18V, and low supply current of 1.8mA. Ideal for graphics displays, it features a small outline package with very thin profile suitable for industrial applications at temperatures ranging from -40°C to 85°C.
MIC2292-34YML-TR
MIC2292-34YML-TR by Microchip is a graphics display driver with 3 segments, suitable for automotive applications. It operates b/w -40 to 125 °C, with a supply voltage range of 2.5V to 10V. The chip carrier package has a very thin profile and nickel palladium gold terminal finish for surface mount assembly.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FAN7711MX
FAN7711MX by Onsemi is a small outline graphics display driver with 8 terminals. It operates b/w -25 to 125°C, supporting a nominal voltage of 14V. Ideal for EL displays, it features nickel palladium gold terminal finish and Gull Wing form factor.
FAN7346MX
Fairchild Semiconductor
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR;
FAN7711N
EL DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FAN7711N by Onsemi is an EL display driver with 8 terminals, operating temperature range of -25 to 125 °C. Its package style is in-line rectangular shape made of plastic/epoxy material. Ideal for graphics display applications due to its nominal voltage of 14 V and compact dimensions (7.62mm x 9.805mm).
FAN7311N
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
FAN7317BM
LIQUID CRYSTAL DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY; Terminal Position: DUAL;
FAN7317BMX
LIQUID CRYSTAL DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Finish: MATTE TIN;
FAN7318AM
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
FAN7318AMX
FAN7318BM
LIQUID CRYSTAL DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G20; Maximum Time At Peak Reflow Temperature (s): 30;
FAN7318BMX
LIQUID CRYSTAL DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE; Peak Reflow Temperature (C): 260;
FAN7319M
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
FAN7319MX
FAN7340MX
LED DISPLAY DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: NICKEL PALLADIUM GOLD; JESD-609 Code: e4; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
FAN7346M
FAN7711M
FAN7734MX
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
FAN7318M
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved