Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Diodes Inc.'s AL5809-90P1-7 LED display driver has a max supply voltage of 60V, min supply voltage of 2.5V, and operates in automotive-grade temperature range (-40 to 125°C). It is a surface-mount package with dual terminals suitable for graphics displays applications.
Median Price
$0.369
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Arrow
1+ parts
$0.189
100+ parts
$0.183
1k+ parts
-
10k+ parts
Farnell
$0.373
$0.201
$0.171
$0.169
Mouser Electronics
$0.610
$0.326
$0.263
RS (Exports)
$0.262
Newark
$0.372
$0.330
$0.317
Verical
$0.366
Nova Conductors
$0.241
TME
$0.470
$0.281
Vyrian
ComSIT Distribution GmbH
NAC Semi
$0.286
ComSIT USA
Rutronik
$0.200
VNN
Ampacity Inc.
$0.139
Semicontronic
$0.136
$0.135
Modulus Dynamics
$0.237
Corohmni
Argo Parts USA
$0.234
Continental Prestige Electronics
$0.597
$0.305
Aztec Data Supply Inc.
$2.040
Lixinc
iodParts Technologies Inc.
The use of plastic/epoxy material makes the product lightweight and durable, ideal for automotive applications where weight and durability are important factors.
Allows for easy and secure mounting on circuit boards, simplifying the production process.
Can handle high voltage inputs, making it suitable for a wide range of applications.
Can operate at low voltage levels, providing flexibility in power supply options.
Withstands high temperature environments, ensuring reliable performance in various conditions.
Matte tin finish provides good electrical conductivity and solderability, enhancing the reliability of connections.
Compact width allows for space-efficient design, suitable for applications with limited board space.
Designed to meet automotive industry standards for temperature range, ensuring reliable operation in automotive environments.
Graphics Display Drivers AL5809-90P1-7 attributes and parameters. Explore more Graphics Display Drivers devices from Diodes Incorporated
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Multiplexed Display Capability:
No. of Functions:
No. of Segments:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Position:
Width:
AL5809-90P1-7 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
2N2222A
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
1N4148W-7-F
Multicomp Pro
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
Texas Instruments
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
1N5819HW-7-F
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
FAN5702UMP30X
FAN5702UMP30X by Onsemi is a SERIAL graphics display driver with 16 terminals, operating voltage range of 2.7V to 5.5V, and industrial temperature grade up to 85°C. It is designed for LED display applications requiring a compact chip carrier package with very thin profile and no lead terminal form.
CAP1166-1-BP-TR
Standard Microsystems
LED DISPLAY DRIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: NO LEAD; No. of Terminals: 20; Package Code: HQCCN; Package Shape: SQUARE;
MM5451YV
Micrel
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
LT3591EDDB#TRPBF
Linear Technology
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSON; Package Shape: RECTANGULAR;
HV9910CLG-G
HV9910CLG-G by Microchip Technology is a LED display driver with 8 terminals, operating voltage range of 15-450V, and automotive temperature grade. It is designed for graphics display applications, featuring small outline package style and dual terminal position for easy integration. With matte tin finish and gull wing terminal form, it ensures reliable performance in various environments.
NSI45060JDT4G
NSI45060JDT4G by Onsemi is a small outline LED display driver with 3 terminals, matte tin finish, and gull wing terminal form. It has a peak reflow temperature of 260°C and is suitable for graphics display applications due to its compact size and surface mount capability.
LM3410XMYE/NOPB
LM3410XMYE/NOPB by Texas Instruments is a graphics display driver with 8 terminals, operating from -40 to 125 °C. It has a supply voltage range of 2.7-5.5 V and is suitable for automotive applications as an LED display driver with a small outline package style.
IS31FL3731-SALS2
Integrated Silicon Solution
IS31FL3731-SALS2 by Integrated Silicon Solution is a DOT MATRIX LED DISPLAY DRIVER with 144 segments. It operates b/w -40 to 85 °C and supports SERIAL data input mode. This small outline, surface mount package is ideal for industrial applications requiring precise graphics display control.
CAT4137TD-GT3
Catalyst Semiconductor
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: VSSOP; Package Shape: RECTANGULAR;
LT3744IUHE#PBF
Analog Devices
LT3744IUHE#PBF by Analog Devices is a Graphics Display Driver IC with 36 terminals, operating voltage range of 3.3V to 36V, and temperature grade suitable for automotive applications. This chip carrier package has a very thin profile, matte tin finish, and quad terminal position ideal for LED display driver interfaces in automotive electronics.
ZXLD1366ET5TA
ZXLD1366ET5TA by Diodes Inc. is a LED display driver with 24V nominal voltage, operating from -40 to 125 °C. It has a max supply voltage of 60V and a min fmax of 0.625 MHz. Ideal for automotive applications due to AEC-Q100 screening level.
HV5523K7-G
HV5523K7-G by Microchip Technology is a graphics display driver with SERIAL data input mode. It operates b/w -40 to 85 °C and has a max supply voltage of 5.5 V. Ideal for industrial applications, it features 32 segments, true output polarity, and a terminal pitch of 0.5 mm.
PCF85162T/1,118
NXP Semiconductors
NXP Semiconductors PCF85162T/1,118 is a Graphics Display Driver with 32 segments and 16 digits. It operates at a voltage range of 1.8V to 5.5V, making it suitable for industrial applications requiring multiplexed display capability. The driver features a small outline package with dual terminal position and Gull Wing form factor for easy surface mount installation.
LM3409QHVMY/NOPB
LM3409QHVMY/NOPB by Texas Instruments is a graphics display driver with a max supply voltage of 75V and constant-current output. Ideal for automotive applications, it operates b/w -40 to 125°C, features a small outline package style, and supports LED displays with a nominal voltage of 24V.
LM3914V/NOPB
LM3914V/NOPB by Texas Instruments is a LED display driver with 10 channels and segments. It operates at 3-20 V, with constant-current output and analog data input mode. Ideal for bar graph displays in commercial applications, it comes in a square chip carrier package with 20 terminals.
LP5523TMX/NOPB
National Semiconductor
Display Drivers; Temperature Grade: OTHER; Terminal Form: BALL; No. of Terminals: 25; Package Code: FBGA; Package Shape: SQUARE;
CL220K4-G
CL220K4-G by Microchip Technology is a graphics display driver with 2 terminals, operating voltage range of 5-220V, and temp. range of -40 to 125°C. Ideal for automotive applications, this LED display driver has a small outline package and matte tin terminal finish.
PCA9632DP1,118
NXP Semiconductors' PCA9632DP1,118 is a serial graphics display driver with 8 terminals and a supply voltage range of 2.3V to 5.5V. It operates in industrial temperatures (-40°C to 85°C) and has a max frequency of 1MHz. Ideal for LED displays, this IC comes in a small outline package with gull wing terminals for surface mounting applications.
TPS92515AHVQDGQRQ1
TPS92515AHVQDGQRQ1 by Texas Instruments is a LED display driver with 10 terminals, suitable for automotive applications. It operates b/w -40 to 125 °C with a supply voltage range of 5.5-65 V. The package style is small outline, heat sink/slug, thin profile, and shrink pitch.
PCA9634PW,118
NXP Semiconductors' PCA9634PW,118 is a serial graphics display driver with 20 terminals. It operates b/w -40 to 85 °C and supports LED displays with 8 segments. The small outline package has a max supply voltage of 5.5 V, making it ideal for industrial applications requiring precise control over LED lighting systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AL5809-150P1-7
Diodes Inc.'s AL5809-150P1-7 is a LED display driver with 2 segments. It operates b/w -40 to 125 °C, suitable for automotive applications. With a supply voltage range of 2.5V to 60V, it's designed for graphics displays in compact form factors.
AL5802-7
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
AL5890-20Y-13
LED DISPLAY DRIVER; Terminal Form: FLAT; No. of Terminals: 3; Package Shape: RECTANGULAR; Maximum Operating Temperature: 105 Cel; No. of Functions: 1;
AL5890-10P1-13
LED DISPLAY DRIVER; Terminal Form: FLAT; No. of Terminals: 2; Package Code: VSOF; Package Shape: RECTANGULAR; Minimum Operating Temperature: -40 Cel;
AL5816W5-7
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSOP; Package Shape: RECTANGULAR;
AL5809-60P1-7
AL5809-60P1-7 by Diodes Inc. is a LED display driver with 2 segments, suitable for automotive applications. It operates b/w -40 to 125°C, with supply voltage range of 2.5V to 60V. This small outline package has dual terminals and matte tin finish, making it ideal for graphics displays.
AL5890-15P1-13
LED DISPLAY DRIVER; Terminal Form: FLAT; No. of Terminals: 2; Package Code: VSOF; Package Shape: RECTANGULAR; Width: 1.78 mm;
AL5890-15Y-13
LED DISPLAY DRIVER; Terminal Form: FLAT; No. of Terminals: 3; Package Shape: RECTANGULAR; Multiplexed Display Capability: NO; Nominal Supply Voltage: 10 V;
AL5890-20P1-13
LED DISPLAY DRIVER; Terminal Form: FLAT; No. of Terminals: 2; Package Code: VSOF; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE, VERY THIN PROFILE;
AL5890-30P1-13
LED DISPLAY DRIVER; Terminal Form: FLAT; No. of Terminals: 2; Package Code: VSOF; Package Shape: RECTANGULAR; No. of Functions: 1;
AL5890-40P1-13
LED DISPLAY DRIVER; Terminal Form: FLAT; No. of Terminals: 2; Package Code: VSOF; Package Shape: RECTANGULAR; Input Characteristics: STANDARD;
AL5810QFJ3-7
LED DISPLAY DRIVER; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN;
AL5890-15D-13
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Shape: RECTANGULAR; Maximum Supply Current: 40 mA; No. of Functions: 1;
AL5809-20P1-7
AL5809-20P1-7 by Diodes Inc. is a graphics display driver with a max supply voltage of 60V, operating temperature range of -40 to 125°C, and small outline package style. It is commonly used as an LED display driver in automotive applications.
AL5809-100P1-7
Diodes Inc.'s AL5809-100P1-7 is a LED display driver with 2 segments, suitable for automotive applications. It operates b/w -40 to 125°C and supports supply voltages from 2.5V to 60V. The package style is small outline, very thin profile, making it ideal for space-constrained designs.
AL5809-20QP1-7
LED DISPLAY DRIVER; Terminal Form: FLAT; No. of Terminals: 2; Package Shape: RECTANGULAR; Length: 2.8 mm; Terminal Position: DUAL;
AL5809-15P1-7
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: FLAT; No. of Terminals: 2; Package Code: VSOF; Package Shape: RECTANGULAR;
AL5809-120QP1-7
LED DISPLAY DRIVER; Terminal Form: FLAT; No. of Terminals: 2; Package Shape: RECTANGULAR; JESD-30 Code: R-XDSO-F2; Minimum Operating Temperature: -40 Cel;
AL5890-10D-13
LED DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Shape: RECTANGULAR; Peak Reflow Temperature (C): 260; Terminal Position: SINGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved