Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FAN7317BMX by Onsemi is a Liquid Crystal Display Driver with 20 terminals in a small outline package. It features matte tin finish, gull wing terminals, and plastic/epoxy body material. Ideal for graphics display applications requiring surface mount technology.
Median Price
$1.060
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.610
100+ parts
$0.944
1k+ parts
$0.863
10k+ parts
-
Rochester
$0.925
$0.767
$0.684
DigiKey
$1.160
Verical
$0.959
$0.855
Digiode
$0.720
Vyrian
$0.758
Bristol Electronics
$2.304
$1.429
$0.760
Chip Stock
Dan-Mar Components
ComSIT Distribution GmbH
ACDS - Activité Composants Distribution Service
Corphita
$0.682
Corohmni
Native Components
$1.987
Northwest PG Solutions
$2.185
QUARKTWIN TECHNOLOGY LTD
SupplyDigital Components
Metaverse IC Inc.
Perfect Parts
Microchip USA
Supply Digital
Kulean Microsystems
TANS Electronics
UHIMA Technologies
Problanco Electronics
The use of plastic/epoxy for the package body material makes the product lightweight and durable, ideal for use in a variety of applications.
Being surface mountable allows for easy and efficient installation on circuit boards, saving space and reducing assembly time.
The rectangular package shape provides a compact design, making it easy to integrate into electronic devices while maximizing space utilization.
The 20 terminals allow for versatile connectivity options, enabling the driver to interface with various components within a display system.
The small outline package style offers a space-saving solution for applications with limited board space, while still providing a high level of functionality.
The matte tin terminal finish enhances solderability and conductivity, ensuring reliable connections for long-term performance.
The dual terminal position provides redundancy and improves signal integrity, reducing the risk of connectivity issues and ensuring consistent performance.
The gull wing terminal form offers secure mechanical support and easy soldering, simplifying the assembly process and enhancing overall product reliability.
As a liquid crystal display driver, this product is specifically designed to efficiently control and manage the display of information on LCD screens, ensuring accurate and clear visual output.
Graphics Display Drivers FAN7317BMX attributes and parameters. Explore more Graphics Display Drivers devices from Onsemi
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
FAN7317BMX Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Daco Semiconductor
BAV99
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32H743BIT6
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
TLD2310ELXUMA1
Infineon Technologies
TLD2310ELXUMA1 by Infineon Technologies is a LED display driver with 14 terminals and a max supply voltage of 40V. It features a small outline package style, suitable for graphics display applications. With AEC-Q100 screening level, this IC has a low profile design and is surface mountable.
TPS929120QPWPRQ1
TPS929120QPWPRQ1 by Texas Instruments is a 12-channel LED display driver with a serial data input mode. It operates in automotive-grade temperatures from -40 to 125°C and supports a max supply voltage of 40V. This graphics display driver comes in a small outline package with 24 terminals, making it suitable for various automotive lighting applications.
LT3797IUKG#PBF
Analog Devices
LT3797IUKG#PBF by Analog Devices is a LED display driver with 47 terminals, operating voltage range of 2.5V to 40V, and temperature grade suitable for automotive applications. It features a rectangular package shape, matte tin terminal finish, and true output polarity. Ideal for graphics displays in automotive environments due to its high supply voltage tolerance and wide operating temperature range.
LT3952AHFE#WPBF
Analog Devices' LT3952AHFE#WPBF is a LED display driver with 16 segments, operating voltage range of 3-42V. AEC-Q100 qualified for automotive applications, it has a small outline package with 28 terminals and operates b/w -40 to 150°C.
TPS61161DRVT
TPS61161DRVT by Texas Instruments is a Graphics Display Driver with 6 terminals, operating voltage range of 2.7V to 18V, and low supply current of 1.8mA. Ideal for LED display driver applications due to its small outline package style and industrial temperature grade suitability.
LT3797ELXE#PBF
Linear Technology
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: HLFQFP; Package Shape: SQUARE;
ICM7211AIPL
Intersil
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 40; Package Code: DIP; Package Shape: RECTANGULAR;
LM3406HVQMHXQ1
LM3406HVQMHXQ1 by Texas Instruments is a LED display driver with 14 terminals and a supply voltage range of 6V to 75V. It operates in automotive-grade temperatures from -40°C to 125°C, making it suitable for various automotive lighting applications. The package style is small outline with heat sink, ideal for compact designs requiring high voltage capabilities.
PCA9632DP1,118
NXP Semiconductors
NXP Semiconductors' PCA9632DP1,118 is a serial graphics display driver with 8 terminals and a supply voltage range of 2.3V to 5.5V. It operates in industrial temperatures (-40°C to 85°C) and has a max frequency of 1MHz. Ideal for LED displays, this IC comes in a small outline package with gull wing terminals for surface mounting applications.
MAX7221EWG+T
Analog Devices' MAX7221EWG+T is a Graphics Display Driver with 8-digit display capability, operating at 5V. It features serial data input mode, segment display mode, and can handle up to 7 segments. Ideal for industrial applications requiring LED display drivers in small outline packages.
MAX7219EWG
Maxim Integrated
MAX7219EWG by Maxim Integrated is a Graphics Display Driver with 8-digit display capability. It operates on a supply voltage range of 4-5.5V, suitable for industrial applications. The IC features serial data input mode and totem-pole output characteristics, making it ideal for LED display driver applications.
PCF8577CT/F3,118
NXP Semiconductors' PCF8577CT/F3,118 is a 40-terminal graphics display driver with dot matrix display mode and serial data input. Operating b/w -40 to 85 °C, it supports multiplexed displays and has a max supply voltage of 6 V. Ideal for industrial applications requiring liquid crystal display drivers in compact spaces.
SAA1064T
Display Drivers; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
MAX7221CWG+
MAX7221CWG+ by Analog Devices is a graphics display driver with 8-digit, 7-segment display capability. It operates on a supply voltage range of 4V to 5.5V and has a max operating temperature of 70°C. This IC is commonly used in LED display applications requiring serial data input mode and small outline package style.
ICL7107CPLZ
Renesas Electronics
Renesas Electronics' ICL7107CPLZ is a 3 1/2-digit LED display driver with 23 segments. Operating at temperatures from 0 to 70°C, it has a nominal voltage of 5V and comes in a rectangular package style with 40 terminals. Ideal for graphics display applications requiring standard input characteristics.
MAX6955ATL+
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 40; Package Code: HVQCCN; Package Shape: SQUARE;
AY0438-I/P
Microchip Technology
Microchip Technology's AY0438-I/P is a Graphics Display Driver with 32 segments, 4-digit display mode, and serial data input. It operates in industrial temperature range (-40 to 85 °C) and requires a supply voltage of 5V. Ideal for applications requiring liquid crystal display drivers in various industries.
MAX6951EEE+
MAX6951EEE+ by Analog Devices is a graphics display driver with a serial data input mode and segment display mode. It has a max supply voltage of 5.5V and is commonly used in LED display driver applications.
LM3530UME-40/NOPB
LM3530UME-40/NOPB by Texas Instruments is a graphics display driver with 10 segments, operating voltage of 2.7V to 5.5V, and serial data input mode. It features a grid array package style with very thin profile and fine pitch, suitable for LED display driver applications in various electronic devices.
LT3475EFE#PBF
LED DISPLAY DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: HTSSOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FAN7711MX
Onsemi
FAN7711MX by Onsemi is a small outline graphics display driver with 8 terminals. It operates b/w -25 to 125°C, supporting a nominal voltage of 14V. Ideal for EL displays, it features nickel palladium gold terminal finish and Gull Wing form factor.
EL DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FAN7346MX
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 28; Package Code: SOP; Package Shape: RECTANGULAR;
FAN7711N
EL DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FAN7711N by Onsemi is an EL display driver with 8 terminals, operating temperature range of -25 to 125 °C. Its package style is in-line rectangular shape made of plastic/epoxy material. Ideal for graphics display applications due to its nominal voltage of 14 V and compact dimensions (7.62mm x 9.805mm).
FAN7311N
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: COMMERCIAL EXTENDED; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
FAN7317BM
LIQUID CRYSTAL DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY; Terminal Position: DUAL;
FAN7318AM
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
FAN7318AMX
FAN7318BM
LIQUID CRYSTAL DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G20; Maximum Time At Peak Reflow Temperature (s): 30;
FAN7318BMX
LIQUID CRYSTAL DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Shape: RECTANGULAR; Package Style (Meter): SMALL OUTLINE; Peak Reflow Temperature (C): 260;
FAN7319M
LIQUID CRYSTAL DISPLAY DRIVER; Temperature Grade: OTHER; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
FAN7319MX
FAN7340MX
LED DISPLAY DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: NICKEL PALLADIUM GOLD; JESD-609 Code: e4; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
FAN7346M
FAN7711M
FAN7734MX
LED DISPLAY DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
FAN7317MX
LIQUID CRYSTAL DISPLAY DRIVER; Terminal Form: GULL WING; No. of Terminals: 20; Package Shape: RECTANGULAR; Terminal Position: DUAL; JESD-30 Code: R-PDSO-G20;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved