Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BCP68T1 by Onsemi is a NPN Power BJT with 1A IC, 20V VCEO, and 60MHz fT. Ideal for small outline applications requiring high DC current gain and low power dissipation in a plastic/epoxy package. Suitable for surface mount designs operating up to 140 °C with dual terminals and tin-lead finish.
Median Price
$0.159
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
1k+ parts
$0.132
10k+ parts
$0.117
DigiKey
$0.200
Verical
$0.147
Digiode
$0.124
Vyrian
$0.130
American Microsemiconductor Inc.
$0.150
Component Electronics Inc.
$0.540
$0.400
$0.350
Zilex Electronics Inc.
Prism Electronics
Pegasus Components GmbH
Bristol Electronics
Atlantic Semiconductor
PC Components Company LLC
Electronics Depot
Resion
Cogito LLC
First Choice Components Inc.
LWI Electronics Inc
Connector Distribution Corp
Right Parts Inc.
EMSNET
Corphita
Corohmni
Continental Prestige Electronics
Kepictronics
QUARKTWIN TECHNOLOGY LTD
Kulean Microsystems
Perfect Parts
A-Z Elektronik GmbH
Glotronic Ltd.
Alle Elektronik GmbH
SupplyDigital Components
TANS Electronics
Metaverse IC Inc.
Northwest PG Solutions
Futuretech Components
Assy Fe
Authorized Procurement Solutions
Native Components
UHIMA Technologies
Problanco Electronics
Provides good insulation and protection for the transistor, extending its lifespan and reliability.
NPN transistors are commonly used in amplification circuits, making this product versatile for various applications.
Simplified design and easy integration into circuits.
Convenient for automated assembly processes, saving time and cost.
Can handle moderate power levels, suitable for many electronic projects.
Easy to solder and secure connections.
Ensures stable and reliable amplification in circuits.
Can withstand high temperatures, suitable for industrial applications.
Suitable for low-voltage applications.
Highly reliable and efficient material for transistors.
Capable of handling moderate current levels in circuits.
Provides good conductivity and solderability for reliable connections.
Suitable for environments with moderate moisture levels.
High frequency response for amplifier applications.
Power Bipolar Junction Transistors (BJT) BCP68T1 attributes and parameters. Explore more Power Bipolar Junction Transistors (BJT) devices from Onsemi
Case Connection:
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Element Material:
Nominal Transition Frequency (fT):
BCP68T1 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Rfe International
RC0805FR-0710KL
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
1N4148
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
SS14
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
BSS84-7-F
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
BCP56-16T1G
BCP56-16T1G by Onsemi is a NPN Power BJT with 80V VCEO, 1A IC, and 130MHz fT. Ideal for amplifier applications, it comes in a small outline package with Gull Wing terminals. With a max operating temp of 150°C and hFE of 100, it offers high performance in a compact design.
TIP112
Nte Electronics
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): 2 A; Maximum Collector-Emitter Voltage: 100 V; Terminal Form: THROUGH-HOLE;
BD13916S
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 12.5 W; Maximum Collector Current (IC): 1.5 A; Transistor Application: SWITCHING;
MJE340
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PSFM-W3;
2N3055AG
2N3055AG by Onsemi is a NPN BJT transistor with 115W power dissipation, 60V max collector-emitter voltage, and 15A max collector current. Ideal for switching applications due to its single configuration and 0.8MHz transition frequency.
BD138
Motorola
PNP; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 1.5 A; Transistor Element Material: SILICON; Maximum Collector-Emitter Voltage: 60 V;
BD679A
BD679A by Onsemi is a NPN Power BJT with 40W power dissipation, 750 min hFE, and 80V VCE. Ideal for amplifier applications, it features a built-in diode and resistor in a rectangular package with through-hole terminals. Operating up to 150°C, this transistor has a max collector current of 4A and transition frequency of 10MHz.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
TIP147
Mospec Semiconductor
PNP; Configuration: DARLINGTON; Surface Mount: NO; Maximum Power Dissipation (Abs): 125 W; Maximum Collector Current (IC): 10 A; Maximum Operating Temperature: 150 Cel;
TIP29C
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 30 W; Maximum Collector Current (IC): 1 A;
TIP111
NPN; Configuration: DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Nominal Transition Frequency (fT): 25 MHz; Maximum Power Dissipation (Abs): 50 W; Maximum Collector Current (IC): 2 A;
TIP32C
New Jersey Semiconductor Products
PNP; Configuration: SINGLE; Maximum Collector Current (IC): 3 A; No. of Elements: 1; Maximum Collector-Emitter Voltage: 100 V; Transistor Element Material: SILICON;
TIP125
Rectron
PNP; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): 5 A; Terminal Finish: MATTE TIN; Maximum Collector-Emitter Voltage: 60 V;
MJD127T4G
MJD127T4G by Onsemi is a PNP BJT with Darlington configuration, ideal for switching applications. It features a max collector-emitter voltage of 100V, collector current of 8A, and power dissipation of 20W. With a transition frequency of 4MHz, it operates b/w -65 to 150°C making it suitable for various power control circuits.
TIP3055
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 100 W; Maximum Collector Current (IC): 15 A;
Semiconductors
MJD340T4
NPN; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): 15 W; Maximum Collector Current (IC): .5 A; Terminal Position: SINGLE;
NJVMJD44H11G
NJVMJD44H11G by Onsemi is a NPN BJT transistor with 80V VCEO, 8A IC, and 20W Ptot. Ideal for switching applications, it has a hFE of min. 40 and operates up to 150°C. Suitable for surface mount designs in automotive electronics (AEC-Q101 compliant).
BD139
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 12.5 W; Maximum Collector Current (IC): 1.5 A; No. of Terminals: 3;
TIP117
Taitron Components
PNP; Configuration: DARLINGTON; Surface Mount: NO; Maximum Collector Current (IC): 2 A; JEDEC-95 Code: TO-220AB; Transistor Application: AMPLIFIER;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BCP69T1G
BCP69T1G by Onsemi is a PNP Power BJT with 1A IC, 60MHz fT, and 150°C max temp. Ideal for small outline applications requiring high DC gain and low power dissipation in a compact package. Suitable for surface mount designs needing a single PNP transistor with 20V VCE.
BCP69,115
NXP Semiconductors
The NXP Semiconductors BCP69,115 is a PNP Power BJT with 1A IC and 20V VCE. It has a small outline package, Gull Wing terminals, and can handle up to 1.5W power dissipation. Ideal for switching applications with a transition frequency of 40MHz.
Nexperia
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 40 MHz; Maximum Collector Current (IC): 1 A; Case Connection: COLLECTOR;
BCP68-25,115
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 40 MHz; Maximum Power Dissipation (Abs): 1.4 W; Maximum Collector Current (IC): 1 A;
BCP69,135
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 40 MHz; Maximum Collector Current (IC): 1 A; Peak Reflow Temperature (C): 260;
BCP69,135 by NXP Semiconductors is a PNP power bipolar junction transistor with a max collector-emitter voltage of 20V and a max collector current of 1A. It is commonly used for switching applications due to its small outline package style and high transition frequency of 40MHz.
BCP68T1G
BCP68T1G by Onsemi is a NPN Power BJT for switching applications. It has a VCEsat of 0.5V, hFE of 60, and can handle up to 1A collector current. With a max operating temperature of 150°C, it is ideal for small outline surface mount designs.
BCP68,115
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 40 MHz; Maximum Power Dissipation (Abs): 1.5 W; Maximum Collector Current (IC): 1 A;
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 40 MHz; Maximum Collector Current (IC): 1 A; JESD-30 Code: R-PDSO-G4;
BCP69T3
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 60 MHz; Maximum Power Dissipation (Abs): 1.5 W; Maximum Collector Current (IC): 1 A;
BCP69T1
BCP69T1 by Onsemi is a PNP Power BJT with 1A IC, 20V VCE, and 60MHz fT. Ideal for applications requiring high power dissipation up to 1.5W in small outline packages. Suitable for surface mount designs needing a single configuration transistor with Gull Wing terminals.
BCP68T3
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 60 MHz; Maximum Power Dissipation (Abs): 1.5 W; Maximum Collector Current (IC): 1 A;
BCP68T3G
BCP68
Onsemi's BCP68 is a NPN Power BJT with 1A IC, 20V VCE, and 1.5W Pd. Ideal for amplifier applications, it comes in a small outline package with Gull Wing terminals for surface mounting. Operating up to 150°C, it has hFE of 60 and matte tin finish on its dual-positioned terminals.
BCP68-10-TAPE-13
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 60 MHz; Maximum Collector Current (IC): 1 A; Maximum Collector-Emitter Voltage: 20 V;
BCP68-10
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 60 MHz; Maximum Collector Current (IC): 1 A; Maximum VCEsat: .5 V;
BCP68-16-TAPE-13
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 60 MHz; Maximum Collector Current (IC): 1 A; No. of Terminals: 4;
BCP68-16-TAPE-7
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 60 MHz; Maximum Collector Current (IC): 1 A; Package Shape: RECTANGULAR;
BCP68-25-TAPE-7
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 60 MHz; Maximum Collector Current (IC): 1 A; JESD-30 Code: R-PDSO-G4;
BCP68T1
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved