Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PBHV8115TLH,215 by Nexperia is a NPN BJT transistor with max. Vce of 150V and Ic of 1A. With hFE of 60 and fT of 30MHz, it's ideal for switching applications in automotive electronics. This Gull Wing package has 3 terminals and is surface mountable, making it suitable for compact designs.
Median Price
$0.260
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.251
1k+ parts
$0.208
10k+ parts
$0.185
DigiKey
$0.310
Verical
Nova Conductors
$0.074
Vyrian
DigiKey Marketplace
Semicontronic
$0.071
$0.069
Ampacity Inc.
Continental Prestige Electronics
$0.073
Argo Parts USA
$0.072
AZTECH Wire
$0.100
$0.090
QUARKTWIN TECHNOLOGY LTD
Supply Digital
Provides durability and protection for the transistor, making it suitable for various applications.
NPN transistors are commonly used in amplification and switching circuits due to their high efficiency.
Simplified circuit design and easy to use for switching applications.
Designed specifically for switching applications, ensuring optimal performance in those scenarios.
Facilitates easy installation on circuit boards, especially for automated assembly processes.
Ensures a reliable amplification of input signal in various circuit configurations.
Can handle relatively high voltage levels, making it suitable for a wide range of applications.
Capable of handling moderate current levels, suitable for many switching applications.
Provides good electrical conductivity and corrosion resistance, enhancing the overall performance and longevity.
Offers high frequency response, making it ideal for applications requiring fast switching speeds.
Small Signal Bipolar Junction Transistors (BJT) PBHV8115TLH,215 attributes and parameters. Explore more Small Signal Bipolar Junction Transistors (BJT) devices from Nexperia
Maximum Collector Current (IC):
Maximum Collector-Emitter Voltage:
Configuration:
Minimum DC Current Gain (hFE):
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Reference Standard:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
Nominal Transition Frequency (fT):
PBHV8115TLH,215 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Founded in 2017, Nexperia is a leading provider of semiconductors, based out of Nijmegen, the Netherlands. It is owned by the partially state-owned Chinese company Wingtech Technology. With factories in Hamburg, Germany and Greater Manchester, England, Nexperia is able to provide its clients with high quality semiconductor products quickly and efficiently.On November 8, 2023, Vishay and Nexperia BV announced that they have entered into an agreement whereby Vishay will acquire Nexperia’s wafer fabrication facility and operations located in Newport, South Wales, U.K. for approximately $177,000 in cash, subject to customary post-closing adjustments. On November 8, 2023, Vishay remitted $8,750 to an escrow account as a deposit for the acquisition. Such amount is included within "Purchase of and deposits for businesses, net of cash acquired" on the consolidated statement of cash flows. To effect the transaction, Vishay will acquire a 100% interest in the legal entity Neptune 6 Limited, and its wholly-owned operating subsidiary, Nexperia Newport Limited, which owns and operates the Newport facility. The closing of the transaction is subject to U.K. government review and customary closing conditions, and is expected to occur in the first quarter of 2024.
CEO
Xuezheng Zhang (Wing)
CFO
Stefan Tilger
COO
Achim Kempe
Hamburg
Fabrication
Fab Initiation
1981
Germany
Wafer Capacity
36,000
Manchester (8-inch line)
2017
Australia
Hazelgrove
12,000
Manchester (6-inch line)
1998
22,000
Shanghai Fab
2022
China
Shanghai
Nexperia Newport
UK
Newport
34,000
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
1N4148
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Synsemi
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
M39029/58-360
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
ULN2003ADR
Texas Instruments
ULN2003ADR by Texas Instruments is a NPN BJT with 7 elements, max IC of 0.5A, and VCEsat of 1.6V. Ideal for switching applications in small outline packages with Gull Wing terminals.
PIC18F4550T-I/PT
Microchip Technology
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
Central Semiconductor
BC817-40,235
NXP Semiconductors
NXP Semiconductors' BC817-40,235 is a NPN BJT transistor for switching applications. With VCEsat of 0.7V and hFE of 250, it can handle IC up to 0.5A. Operating at 150°C max temp, it's ideal for small outline packages in surface mount configurations.
BC817-25
Lite-on Semiconductor
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; Transistor Application: AMPLIFIER;
BCY89
Tt Electronics Plc
NPN; Configuration: SEPARATE, 2 ELEMENTS; Surface Mount: NO; Nominal Transition Frequency (fT): 50 MHz; Maximum Collector Current (IC): .03 A; Package Shape: ROUND;
FMMT493TA
Diodes Incorporated
FMMT493TA by Diodes Inc. is a NPN BJT transistor with 3 terminals, suitable for switching applications. It has a max collector-emitter voltage of 100V, max collector current of 1A, and min DC current gain of 20. With a package style of small outline and surface mount capability, it operates up to 150°C and has a transition frequency of 150MHz.
BC547C
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 150 MHz; Maximum Collector Current (IC): .1 A; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
MMBT2907A-7-F
Diodes Inc. MMBT2907A-7-F is a PNP BJT transistor with 60V VCEO, 0.6A IC, and 200MHz fT. Ideal for switching applications in automotive electronics due to AEC-Q101 compliance and small outline package.
BC817-25LT3G
Onsemi
BC817-25LT3G by Onsemi is a NPN BJT transistor with 160 min hFE, 45V VCEO, and 100MHz fT. Ideal for small signal applications in electronics due to its 0.5A IC and 0.3W Ptot capabilities. Its GULL WING terminals and SOT package make it suitable for surface mount PCB designs.
MMBT3906,215
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .2 A; No. of Elements: 1;
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 100 MHz; Maximum Collector Current (IC): .5 A; No. of Elements: 1;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 150 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .1 A;
2N3906
Micro Electronics
PNP; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .35 W; Maximum Collector Current (IC): .2 A;
MMBT4403LT1G
MMBT4403LT1G by Onsemi is a PNP BJT transistor with max VCEsat of 0.75V, hFE of 100, and IC of 0.6A. Ideal for switching applications due to its small outline package style and high transition frequency of 200MHz. With a max operating temp of 150°C, it offers reliable performance in various electronic circuits.
MMBT3906T-7-F
Diodes Inc. MMBT3906T-7-F is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance and max operating temp of 150°C. Features GULL WING terminals, RECTANGULAR package shape, and SILICON transistor element material.
2N2219A
Baneasa S A
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; JESD-30 Code: O-MBCY-W3; Package Body Material: METAL; Terminal Form: WIRE;
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 100 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .1 A;
MMBT2907A
Motorola
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
BC846-B
Infineon Technologies
BC846-B by Infineon Technologies is a NPN BJT transistor with 200 min hFE, suitable for amplifier applications. It has a max collector-emitter voltage of 65V and can handle up to 0.1A of collector current. With a transition frequency of 250MHz, it comes in a small outline package ideal for surface mount assembly.
BC857BLT1G
BC857BLT1G by Onsemi is a PNP BJT transistor for switching applications. With hFE of 220, VCEO of 45V, and IC of 0.1A, it operates b/w -55 to 150°C. Its small outline package with Gull Wing terminals makes it suitable for surface mount designs.
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
74LVC1G14GX4
INVERTER; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au); Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e4; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
BCP56H
Small Signal Bipolar Transistors; Moisture Sensitivity Level (MSL): 1; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; JESD-609 Code: e3; Terminal Finish: Tin (Sn);
NCR320U
LED DISPLAY DRIVER; Terminal Finish: Tin (Sn); Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3;
PESD2ETH1G-T
PESD2ETH1G-T by Nexperia is a transient suppression device with common cathode configuration, 2 elements, and bidirectional polarity. It operates b/w -55 to 150 °C and has a max reverse voltage of 24 V. Ideal for protecting electronic circuits from voltage spikes in automotive and industrial applications.
PMEG120G10ELR
BUK7S0R7-40H
Power Field-Effect Transistors; Terminal Finish: Tin (Sn); Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
PESD3V3T1BL
PNS40010ER
MJD45H11
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 80 MHz; Maximum Power Dissipation (Abs): 20 W; Maximum Collector Current (IC): 8 A;
BUK7V4R2-40H
Power Field-Effect Transistors; Terminal Finish: Tin (Sn); JESD-609 Code: e3; Moisture Sensitivity Level (MSL): 1;
PMEG050T150EIPD
74AUP1G17GX4
BUFFER; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au); Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;
GAN063-650WSA
PESD2V8R1BSF
74HC4053PW
SPDT; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
PESD2CANFD24V-T
74LV1T08GW
AND GATE; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
PMEG060T050ELPE
NXS0104PW-Q100
BUS TRANSCEIVER; JESD-609 Code: e4; Terminal Finish: Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag); Moisture Sensitivity Level (MSL): 1;
MJD31CA
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 3 MHz; Maximum Power Dissipation (Abs): 15 W; Maximum Collector Current (IC): 3 A;
PBHV8540X,115
PBHV8540X,115 by Nexperia is a NPN BJT transistor with hFE of 100. It has VCE of 400V and IC of 0.5A, suitable for switching applications. This small outline transistor operates at fT of 30MHz, making it ideal for high-speed electronic circuits.
PBHV9560ZX
PBHV9560ZX by Nexperia is a PNP small signal bipolar junction transistor (BJT) with a max collector-emitter voltage of 600V and a max collector current of 0.5A. It is commonly used for switching applications in various industries.
PBHV8560ZX
Nexperia's PBHV8560ZX is a NPN BJT transistor with max. VCE of 600V and IC of 0.5A. Ideal for switching applications, it has hFE of 70 and comes in a small outline package with Gull Wing terminals. AEC-Q101 & IEC-60134 compliant, suitable for various electronic designs.
PBHV8540Z,115
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 30 MHz; Maximum Power Dissipation (Abs): 1.4 W; Maximum Collector Current (IC): .5 A;
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 30 MHz; Maximum Collector Current (IC): .5 A; Minimum DC Current Gain (hFE): 80;
PBHV8115T,215
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 30 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): 1 A;
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 30 MHz; Maximum Collector Current (IC): 1 A; Peak Reflow Temperature (C): 260;
PBHV8540T,215
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 30 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .5 A;
PBHV8215Z,115
PBHV8215Z,115 by NXP Semiconductors is a NPN BJT transistor with 150V VCEO and 2A IC. It has a min hFE of 55 and can handle up to 1.45W power dissipation. Ideal for switching applications, this SOT-89 transistor operates at temperatures up to 150°C, making it suitable for various electronic designs.
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 33 MHz; Maximum Collector Current (IC): 2 A; Package Body Material: PLASTIC/EPOXY;
PBHV9050T,215
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 50 MHz; Maximum Collector Current (IC): .15 A; Package Shape: RECTANGULAR;
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 50 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .15 A;
PBHV9115T,215
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 115 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): 1 A;
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 115 MHz; Maximum Collector Current (IC): 1 A; Maximum Time At Peak Reflow Temperature (s): 30;
PBHV8515QAZ
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 75 MHz; Maximum Collector Current (IC): .5 A; Maximum Time At Peak Reflow Temperature (s): 30;
PBHV8140Z,115
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 25 MHz; Maximum Collector Current (IC): 1 A; Maximum Time At Peak Reflow Temperature (s): 30;
PBHV9040T,215
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 55 MHz; Maximum Collector Current (IC): .25 A; Maximum Time At Peak Reflow Temperature (s): 30;
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 55 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .25 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved