Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PROGRAMMABLE UJT; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; JESD-609 Code: e0;
Median Price
$0.645
Lifecycle Status
Suppliers In-Stock
43
In-Stock Inventory
1k+
TEDSS.com
1+ parts
$0.500
100+ parts
$0.250
1k+ parts
-
10k+ parts
Nova Conductors
$0.790
Chip Stock
Standard Data Resources
Digiode
Fibra_Brandt Electronic GMBH
Anansix
A2Z Electronics, Inc.
Bristol Electronics
Pegasus Components GmbH
ComSIT Distribution GmbH
Lakeview Electronics
Vyrian
Tech-Mark Corp
Manotoh
Atlantic Semiconductor
R&J Components
Prism Electronics
Diverse Electronics
LittleDiode
Vectronix, Inc
J & M Industries LLC
EPE Components Inc.
M&R Communications
Pride Electronics
J2 Sourcing AB
Huijzer Components
ECAB
MRC Electronics
Manoshevitz Elec. Sales
Holdelec - ElecDif-Pro
Speed Components Ltd
Electronics Depot
MISTER SPROCKETS
GES GmbH
Sunrise Surplus Inc.
Odyssey Electronics LTD
ACDS - Activité Composants Distribution Service
ICP Electronique
NAC Semi
Mil-Aero Solutions, Inc.
Electronic Expediters
Sinequanon
Advanced Electronics
$0.073
$0.069
Corohmni
Continental Prestige Electronics
$0.774
Argo Parts USA
Netroflash
Aztec Data Supply Inc.
$3.846
Microchip USA
$6.175
AZTECH Wire
$7.011
Semicontronic
$17.100
$16.672
$16.587
One Stop Electronics
$210.100
Infinite Electronics LLP (Excess)
QUARKTWIN TECHNOLOGY LTD
SupplyDigital Components
Corphita
Problanco Electronics
TANS Electronics
UNI Independent Distributors
Kulean Microsystems
Glotronic Ltd.
Perfect Parts
Authorized Procurement Solutions
Assy Fe
UHIMA Technologies
Programmable Unijunction Transistors (UJT) 2N6027 attributes and parameters. Explore more Programmable Unijunction Transistors (UJT) devices from New England Semiconductor
Maximum Anode To Cathode Voltage:
Configuration:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Maximum On-state Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Maximum Power Dissipation:
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Trigger Device Type:
2N6027 Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
NSN
5961-00-106-3698, 5961001063698, 5961-00-432-2808, 5961004322808, 5961-01-112-5312, 5961011125312, 5961-01-030-8062, 5961010308062
NIIN
001063698, 004322808, 011125312, 010308062
New England Semiconductor was founded in 1985 as a manufacturer of aerospace grade high-reliability bipolar transistors. New England Semiconductor was acquired by Microsemi in 2001. Microsemi Corporation is a semiconductor manufacturer specializing in system-engineered integrated circuits and high reliability discrete devices. A long-time supplier of high-reliability discrete components to military and aerospace customers, Microsemi today is a global supplier of high performance analog, mixed-signal integrated circuits and high reliability discrete semiconductors that manage and regulate power, protect against transient voltage spikes, and transmit, receive and amplify electronic signals.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
2N2222A
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
PIC18F4550-I/P
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
Bytesonic Electronics
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N6028PBFREE
Central Semiconductor
2N6028PBFREE by Central Semiconductor is a Programmable UJT with max anode-cathode voltage of 40V. It has a single configuration, operates b/w -50 to 100°C, and requires a min valley current of 25uA. This through-hole transistor is ideal for applications requiring precise triggering in electronic circuits.
BRY56C
Infineon Technologies
PROGRAMMABLE UJT; Surface Mount: NO; Maximum On-state Current: .175 A; Maximum Power Dissipation: .3 W; Maximum Operating Temperature: 150 Cel;
2N6027APMPBFREE
PROGRAMMABLE UJT; Maximum Time At Peak Reflow Temperature (s): 30; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; JESD-609 Code: e3;
2N6027
Harris Semiconductor
PROGRAMMABLE UJT; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Minimum Valley Current: 70 uA;
2N6027RL1G
2N6027RL1G by Onsemi is a Programmable UJT with max on-state current of 0.15A, anode-cathode voltage of 40V, and min valley current of 70uA. Ideal for triggering circuits in applications like pulse generators and thyristor firing.
TN41B
Toshiba
PROGRAMMABLE UJT; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Package Body Material: PLASTIC/EPOXY;
2N6027/PH
NXP Semiconductors
PROGRAMMABLE UJT; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Qualification: Not Qualified;
2N6027RLRP
2N6027RLRP by Onsemi is a Programmable Unijunction Transistor with max on-state voltage of 1.6V and current of 0.15A. It operates b/w -50 to 100 °C, making it suitable for trigger applications in various circuits due to its programmable UJT type. With a power dissipation of 0.3W, it offers reliable performance in diverse electronic systems.
BRY56
PROGRAMMABLE UJT; Surface Mount: NO; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0; Maximum On-state Current: .175 A;
C5T6028
C5T6028 by Texas Instruments is a Programmable UJT with 0.15A On-state Current, -65 to 150°C Operating Temp, and 0.3W Power Dissipation. Ideal for triggering devices in various applications requiring precise control of electrical signals.
CMPP6028TRPBFREE
CMPP6028TRPBFREE by Central Semiconductor is a Programmable UJT with 0.15A On-state Current, -50 to 100 °C Operating Temp, and 0.35W Power Dissipation. Ideal for triggering applications in circuits requiring precise timing control.
TN41A
PROGRAMMABLE UJT; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Operating Temperature: 125 Cel;
2N6118
The Texas Instruments 2N6118 is a Programmable UJT with max anode-cathode voltage of 40V. It has single configuration, round package shape, and wire terminal form. Ideal for applications requiring min valley current of 50uA, max peak current of 0.15uA, and anode case connection.
Motorola
PROGRAMMABLE UJT; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Terminal Form: THROUGH-HOLE;
2N6028RLRA
2N6028RLRA by Onsemi is a Programmable UJT with max on-state current of 0.15A and anode-cathode voltage of 40V. Ideal for applications requiring trigger devices, it operates b/w -50 to 100 °C with a power dissipation of 0.3W.
2N6027RLRA
2N6027RLRA by Onsemi is a Programmable UJT with max on-state current of 0.15A and anode-cathode voltage of 40V. It has a min valley current of 70uA, making it ideal for triggering circuits in applications requiring precise control over switching characteristics. With a package style of cylindrical shape and through-hole terminals, it can operate b/w -50°C to 100°C efficiently.
2N6028
2N6028 by Onsemi is a Programmable UJT with max on-state current of 0.15A and anode-cathode voltage of 40V. It has 3 terminals, operates b/w -50 to 100°C, and can handle peak current of 0.15uA. Ideal for triggering circuits in applications like timing, sensing, and thyristor firing.
2N6028G
2N6028G by Onsemi is a Programmable UJT with max on-state current of 0.15A and anode-cathode voltage of 40V. It has a single configuration, operates b/w -50 to 125 °C, and is ideal for triggering applications in electronics circuits.
A7T6028
A7T6028 by Texas Instruments is a Programmable UJT with 3 terminals and a max anode to cathode voltage of 40V. It has a min valley current of 25uA and max power dissipation of 0.3W. Ideal for applications requiring trigger devices with low peak current requirements.
2N6028RLRM
2N6028RLRM by Onsemi is a Programmable UJT with max on-state current of 0.15A and anode-cathode voltage of 40V. It has a single configuration, operates b/w -50 to 100 °C, and is used in trigger devices for applications requiring precise timing control.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Onsemi's 2N6027 is a Programmable UJT with max. on-state current of 0.15A and anode-cathode voltage of 40V. Ideal for applications requiring trigger devices, it operates b/w -50 to 100°C, with min. valley current of 70uA and max. power dissipation of 0.3W in a cylindrical package style.
Philips Components
PROGRAMMABLE UJT; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; No. of Terminals: 3;
Unitrode
PROGRAMMABLE UJT; Surface Mount: NO; Maximum Power Dissipation: .3 W; Maximum Operating Temperature: 100 Cel; Maximum On-state Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
Micro Electronics
PROGRAMMABLE UJT; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Package Shape: ROUND;
Semitronics
PROGRAMMABLE UJT; Surface Mount: NO; Maximum Operating Temperature: 100 Cel; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Power Dissipation: .3 W; JESD-609 Code: e0;
Swampscott Electronics
Thomson Consumer Electronics
PROGRAMMABLE UJT; Surface Mount: NO; Maximum On-state Voltage: 1.6 V; Minimum Operating Temperature: -50 Cel; Terminal Finish: Tin/Lead (Sn/Pb); Maximum On-state Current: .15 A;
PROGRAMMABLE UJT; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum On-state Current: .15 A;
Planeta Semiconductor
PROGRAMMABLE UJT; Surface Mount: NO; Maximum Power Dissipation: .3 W; Maximum On-state Current: .15 A; Maximum On-state Voltage: 1.6 V; Maximum Operating Temperature: 100 Cel;
General Electric Solid State
PROGRAMMABLE UJT; Surface Mount: NO; Minimum Operating Temperature: -50 Cel; Maximum Operating Temperature: 100 Cel; Maximum On-state Voltage: 1.6 V; Maximum Power Dissipation: .3 W;
New Jersey Semiconductor Products
PROGRAMMABLE UJT; Package Style (Meter): CYLINDRICAL; Surface Mount: NO; Terminal Position: BOTTOM; Configuration: SINGLE; Maximum Peak Current: 2 uA;
2N6027G
The Onsemi 2N6027G is a Programmable UJT with max on-state current of 0.15A and anode-cathode voltage of 40V. It has a single configuration, suitable for triggering applications in circuits requiring precise timing control at temperatures ranging from -50 to 125°C.
2N6027RLRAG
2N6027RLRAG by Onsemi is a Programmable UJT with max on-state current of 0.15A, anode-cathode voltage of 40V, and min valley current of 70uA. It is used in trigger devices, operating b/w -50 to 125°C, with a power dissipation of 0.3W for applications requiring single configuration UJTs.
2N6027PBFREE
2N6027PBFREE by Central Semiconductor is a Programmable UJT with max anode-cathode voltage of 40V, min valley current of 70uA, and max peak current of 2uA. It is used in trigger devices for applications requiring precise control over switching at temperatures ranging from -50°C to 100°C.
2N6027TREPBFREE
PROGRAMMABLE UJT; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
New England Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved