Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 43030-0001 contact is a CRIMP type terminal with CHAIN design, suitable for wire sizes ranging from 24 AWG to 20 AWG. It has a finish thickness of 40 and is commonly used in applications such as 43025, 43645, and 44133 assemblies.
Median Price
$0.058
Lifecycle Status
Suppliers In-Stock
69
In-Stock Inventory
1k+
Power & Signal
1+ parts
$0.030
100+ parts
-
1k+ parts
10k+ parts
Distrelec
$0.055
Arrow
$0.060
$0.050
$0.037
$0.033
PSC Electronics
$0.073
DigiKey
$0.130
$0.064
$0.054
Element14
$0.143
$0.078
$0.070
TTI Europe
Heilind Electronics
NEP Electronics
TTI
Mouser Electronics
Verical
RS (Exports)
$0.075
$0.069
Sager
Compona
Master Electronics
Powell Electronics
Future Electronics
$0.020
Farnell
Newark
Interstate Connecting
Chip1Stop
$0.046
$0.044
$0.041
RS Americas
$0.036
$0.028
DF Sales Co.
Digiode
Electro Sonic
$0.045
Nova Conductors
$0.052
TME
$0.048
$0.040
Component Electronics Inc.
$0.650
$0.490
$0.430
NAC Semi
$5.000
Rutronik
IBS Electronics
Vyrian
Jameco Electronics
Famous Connections Ltd
Connector Distribution Corp
Right Parts Inc.
Chip Stock
Inventory MP
EMSNET
Electronic Treasures
Bisco
$0.549
$0.066
$0.049
Q Components
ComSIT USA
A2Z Electronics, Inc.
ABC Electronics Ltd.
Bristol Electronics
LIBRA Elektronik GmbH
Legend Electronics Inc.
Cogito LLC
Semi Source
Prism Electronics
Elcom Components
VNN
Cyclops Electronics Ltd
Speed Components Ltd
SPM Sales
LWI Electronics Inc
Brevan Electronics
QIE Inc.
Century Electronics Ltd.
Holdelec - ElecDif-Pro
ACDS - Activité Composants Distribution Service
Florida Circuit
ComSIT Distribution GmbH
Sunrise Surplus Inc.
Kallista Electronics Ltd
American Connector Supply Corp
Eastek
$0.008
Semicontronic
$0.025
$0.024
Corphita
$0.027
Argo Parts USA
Aranea Global
$0.051
CoreStaff
$0.148
Andel Nordic
$3.849
$3.695
Advanced Electronics
$5.914
$5.619
Aztec Data Supply Inc.
$7.129
Modulus Dynamics
$7.893
Perfect Parts
Abacus Technologies
EMSNET (Excess)
S.R.D Solutions
GreenTree Electronics
Continental Prestige Electronics
Infinite Electronics LLP (Excess)
Assy Fe
Authorized Procurement Solutions
Lee Johnson Sales, Inc.
ErreBi Group
Futuretech Components
Kepictronics
Speed Components Ltd (Excess)
XScomponents
Robosynatics
$2.299
$2.252
Lucentia Tech
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Formix International (Excess)
Designed to be used with specific models, ensuring compatibility and optimal performance.
Optimal thickness for durability and longevity of the product.
Crimped terminals provide secure connections and prevent accidental disconnections.
Chain contact design allows for high reliability and stable signal transmission.
Clearly labeled for easy identification during assembly and maintenance.
Supports a wide range of wire sizes for versatile applications.
Accommodates larger wire sizes for increased power handling capabilities.
Allows for easy insertion and secure connection of cables.
Designed for specific gender compatibility for seamless connections.
Straight mounting style for easy installation and alignment.
Square pin-socket contact style provides a stable and secure connection.
Phosphor bronze material for excellent conductivity and durability.
Optimal terminal length for secure connections without excess bulk.
Assembly Products 43030-0001 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Usage:
Maximum Wire Size:
Minimum Wire Size:
43030-0001 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Assembly/Origin - Multiple Devices Production 09/Oct/2017
PCN Packaging - Multiple Devices Packaging 18/Jul/2019
PCN Other - Multiple Devices Shipping Location 20/Mar/2020
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
1N4148WS
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Diotec Semiconductor Ag
Surge Components
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
M39029/58360
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
7-1452665-1
TE Connectivity
TE Connectivity's 7-1452665-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 23 to 22 AWG and rated current of 10A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40°C to 130°C.
1-794606-2
TE Connectivity 1-794606-2 is a crimp terminal with approvals from CSA, UL, and VDE. Featuring stranded construction, it has a rated voltage of 250V and can accommodate wire sizes ranging from 24 to 20 AWG. Ideal for power applications with a max current of 5A, this female contact is designed for use in discrete wire cables up to 0.06 inch entry size.
0462-005-20141
TE Connectivity's 0462-005-20141 is a CRIMP terminal with MACHINED contact design. It supports wire gauge up to 16 AWG, rated for 7.5A current. Ideal for applications requiring FEMALE contact gender and ROUND PIN-SOCKET style in straight mounting setup.
HR30-PC-211
Hirose Electric
The Hirose Electric HR30-PC-211 CONTACT is a MALE round pin-socket with PHOSPHOR BRONZE material. It supports wire sizes from 30 AWG to 26 AWG and features a STRAIGHT mounting style. Ideal for assembly applications requiring precise electrical connections in compact spaces.
N3505-2B
3m Electronic Products Division
CONNECTOR ACCESSORY; MIL Conformity: NO; Maximum Operating Temperature: 105 Cel; Minimum Operating Temperature: -55 Cel; Approvals (V): UL; IEC Conformity: NO;
WP-4S
Amphenol
CONNECTOR ACCESSORY; Material: POLYETHYLENE; Minimum Operating Temperature: -55 Cel; IEC Conformity: NO; DIN Conformity: NO; Usage: DTP SERIES;
1375819-1
TE Connectivity's 1375819-1 CONTACT features CRIMP terminal type, rated voltage of 250V, and wire gauge of 22 AWG. Ideal for SIGNAL design applications with a max operating temperature of 105°C and rated current of 4A.
5-963715-1
TE Connectivity 5-963715-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 18 AWG, cross section area of 0.75 mm2, and rated current of 7.5 A. Ideal for applications requiring female contact gender and operating temperatures ranging from -40 to 120 °C.
5-66506-9
Tyco Electronics Amp
5-66506-9 by Tyco Electronics Amp is a CRIMP terminal with 0.05" min cable entry, suitable for 24-20 AWG wires. Its ROUND PIN-SOCKET contact design and MALE gender make it ideal for straight mounting applications in assembly products.
6648400-1
TE Connectivity 6648400-1 is a POWER female contact with SOLDER terminal type. It has a rated current of 75A, suitable for wire sizes up to 0 AWG. With operating temperatures from -55°C to 105°C, it is ideal for high-power applications requiring reliable connections.
2-929939-1
TE Connectivity's 2-929939-1 is a DIN-approved CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 30A current. Ideal for power applications with operating temperatures ranging from -40 to 150°C.
1766195-1
TE Connectivity's 1766195-1 is a CRIMP terminal with copper alloy material, suitable for POWER applications. With a finish thickness of 200 µm, it supports wire gauge from 14 to 12 AWG and can handle up to 35 A current. Ideal for male contact gender in straight mounting style, operating b/w -55°C to 105°C.
793-5503
Wago
TERMINAL BLOCK ACCESSORY;
1718250100
Molex
CONNECTOR ACCESSORY;
W8P
The TE Connectivity W8P is a wedge item designed for power and signal assemblies in the DT Series. It supports wire sizes up to 0 AWG, with a temperature range from -55°C to 125°C. Made of polybutylene terephthalate, it's ideal for applications requiring high-performance connectivity.
PX0480
Bulgin
87116-2
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; MIL Conformity: NO; Material: NYLON66; Assembly Item Name: KEYING ITEM;
1731110081
CONNECTOR ACCESSORY; IEC Conformity: NO; Assembly Item Name: BACKSHELL; MIL Conformity: NO; Mounting Option-2: SCREW; Material: METAL;
SPAL-001T-P0.5
J S T Mfg
SPAL-001T-P0.5 by J S T Mfg is a UL approved PAL connector with crimp terminal type, suitable for 26-22 AWG wires. It has a rated current of 3A and contact resistance of 25 mohm. Ideal for applications requiring male contact gender in straight mounting style at temperatures ranging from -25 to 85 °C.
5230
Keystone Electronics
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
43030-0007
Molex 43030-0007 CONTACT features CRIMP terminals for 24-20 AWG wires, rated at 8.5A current. Suitable for use with connectors like 43025/43645/44133, it has a 0.073" cable entry and is made of PHOSPHOR BRONZE material.
43030-0010
Molex 43030-0010 CONTACT features CRIMP terminal type, LOOSE contact design, and PHOSPHOR BRONZE material. Ideal for 30-26 AWG wires in applications like 43025, 43645, and 44133 assemblies with 0.05" cable entry.
43030-0012
Molex 43030-0012 CONTACT features CRIMP terminal type, PHOSPHOR BRONZE material, and SQUARE PIN-SOCKET contact design. Ideal for 30-26 AWG wires in applications like 43025, 43645, and 44133 assemblies with 0.05" cable entry.
43030-0011
The Molex 43030-0011 is a female crimp contact with a round pin socket design, suitable for use in receptacle assemblies. It supports wire sizes from 26 AWG to 30 AWG and features a 0.138 inch terminal length. This assembly product is made of phosphor bronze and has a max cable entry of 0.05 inch, ideal for straight mounting applications.
43030-0009
The Molex 43030-0009 is a crimp terminal contact with a finish thickness of 30. It is commonly used in assemblies such as 43025, 43645, and 44133. With a rated current of 8.5A, it can accommodate wire sizes ranging from 24 AWG to 20 AWG.
43030-0038
CONNECTOR ACCESSORY; Manufacturer Series: 43030;
43031-0007
Molex 43031-0007 CONTACT features loose contact design, suitable for 24-20 AWG wires. With a 0.073" min cable entry and 0.137" terminal length, it is ideal for use with 43020, 43640, and 44300 assemblies. Made of phosphor bronze, this male contact has a straight mounting style.
43030-0002
Molex 43030-0002 contact features crimp terminal type, 15 finish thickness, and 105 °C max operating temp. Ideal for use with 43025/43645/44133 applications requiring female chain contact design.
43030-0003
The Molex 43030-0003 contact is designed for use with terminals 43025, 43645, and 44133. It features a finish thickness of 30, crimp terminal type, and chain contact design. Ideal for applications requiring a female contact gender, straight mounting style, and square pin-socket contact style.
43031-0001
Molex 43031-0001 CONTACT features CHAIN design, PHOSPHOR BRONZE material, and 0.073" cable entry. Ideal for 24-20 AWG wires in assemblies like 43020, 43640, and 44300.
43030-0004
Molex 43030-0004 CONTACT features CRIMP terminals, CHAIN contact design, and PHOSPHOR BRONZE material. Ideal for 43025/43645/44133 applications with wire sizes ranging from 30 AWG to 26 AWG. Rated for 8.5 A current with a 0.05" cable entry.
43030-0008
Molex 43030-0008 CONTACT features CRIMP terminals for 24-20 AWG wires, rated at 8.5A current. Ideal for use with 43025/43645/44133 assemblies, it has a 0.138" terminal length and 0.073" cable entry.
43030-0021
The Molex 43030-0021 is a female crimp receptacle contact with a terminal length of 0.138". It supports wire sizes from 24 AWG to 20 AWG and has a max cable entry of 0.73". Ideal for straight mounting applications, this contact is made of phosphor bronze and features a round pin socket design.
43031-0004
Molex 43031-0004 CONTACT features CHAIN design, PHOSPHOR BRONZE material, 0.137" terminal length. Ideal for 30-26 AWG wires with 0.05" cable entry. Compatible with 43020, 43640, and 44300 assemblies.
43031-0002
The Molex 43031-0002 CONTACT features a CRIMP terminal type with CHAIN contact design. It supports wire sizes from 24 AWG to 20 AWG and has a max cable entry of 0.073 inch. Ideal for use in assemblies such as 43020, 43640, and 44300.
43030-0006
Molex 43030-0006 is a female crimp receptacle contact with phosphor bronze material. It supports wire sizes from 26 AWG to 30 AWG and has a max cable entry of 0.05". Ideal for straight mounting applications requiring round pin-skt contacts.
43031-0009
Molex 43031-0009 CONTACT features loose contact design, suitable for 24-20 AWG wires. With 0.073" cable entry, it's used in assemblies like 43020, 43640, and 44300. Made of phosphor bronze with 0.137" terminal length, it's a male gender contact for straight mounting applications.
43030-0005
Molex 43030-0005 is a female crimp receptacle contact with phosphor bronze material. It supports wire sizes from 30 AWG to 26 AWG, with a max cable entry of 0.05". Ideal for straight mounting applications requiring round pin-socket contact design.
43031-0008
CONNECTOR ACCESSORY; Contact Design: CHAIN; Additional Features: MATING: GOLD OVER NICKEL (50), TERMINATION: TIN (100) OVER NICKEL (50); Assembly Item Name: CONTACT; Minimum Wire Size: 24 AWG; Maximum Cable Entry: .073 inch;
43030-0027
CONNECTOR ACCESSORY; Minimum Wire Size: 24 AWG; Mounting Style: STRAIGHT; Contact Style: RND PIN-SKT; Material: PHOSPHOR BRONZE; MIL Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved