Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 43031-0009 CONTACT features loose contact design, suitable for 24-20 AWG wires. With 0.073" cable entry, it's used in assemblies like 43020, 43640, and 44300. Made of phosphor bronze with 0.137" terminal length, it's a male gender contact for straight mounting applications.
Median Price
$0.173
Lifecycle Status
Suppliers In-Stock
49
In-Stock Inventory
1k+
Sager
1+ parts
$0.117
100+ parts
-
1k+ parts
10k+ parts
Adafruit Industries
$0.132
$0.125
Arrow
$0.148
$0.113
Heilind Electronics
$0.152
$0.122
Interstate Connecting
$0.172
$0.140
Distrelec
$0.174
Master Electronics
$0.232
$0.211
$0.187
Mouser Electronics
$0.350
$0.245
$0.203
$0.192
RS (Exports)
$0.360
$0.303
$0.257
RS Americas
$0.364
$0.276
$0.222
DigiKey
$0.370
$0.218
Newark
$0.399
$0.292
$0.249
Element14
$0.551
$0.327
$0.261
NEP Electronics
PEI Genesis
TTI
$0.101
Verical
$0.221
Farnell
$0.129
Chip1Stop
$0.141
$0.105
$0.098
Avnet
TTI Europe
BTC Electronics
PSC Electronics
Digiode
$0.111
Nova Conductors
$0.159
DF Sales Co.
$0.160
Electro Sonic
$0.162
$0.147
$0.139
FDH Electronics
$0.131
Electro Enterprises
$0.175
$0.144
TME
$0.260
$0.182
$0.176
NAC Semi
$0.246
IBS Electronics
$0.150
Vyrian
VNN
Component Sense
Classic Components Corporation
Bisco
$1.300
$0.076
Lantek
Sunrise Surplus Inc.
Semi Source
Prism Electronics
Elcom Components
Connector Distribution Corp
Right Parts Inc.
Sensible Micro Corp
Kallista Electronics Ltd
American Connector Supply Corp
Powertech Controls
Corphita
Advanced Electronics
Argo Parts USA
$0.146
$0.142
Netroflash
$0.156
Semicontronic
$0.198
$0.193
Andel Nordic
$1.114
$1.069
Aztec Data Supply Inc.
$5.591
Perfect Parts
EMSNET (Excess)
Assy Fe
GreenTree Electronics
Robosynatics
$0.123
Lucentia Tech
Continental Prestige Electronics
$0.259
Ideal for applications requiring specific usage requirements, ensuring compatibility and optimal performance.
Provides a durable and long-lasting finish, ensuring the product remains resistant to wear and tear.
Enables easy and secure connection with various cable sizes, increasing versatility.
Allows for flexibility and easy insertion/removal of wires, simplifying assembly processes.
Clearly identifies the component, aiding in organization and efficient inventory management.
Compatible with a wide range of wire sizes, ensuring compatibility with standard wiring systems.
Supports thicker wire sizes, allowing for use in applications requiring higher power levels.
Accommodates a range of cable sizes, reducing the need for additional adaptors or accessories.
Specifically designed for male connections, ensuring compatibility with corresponding female components.
Simplifies installation and alignment, making it easy to integrate into existing systems.
Provides excellent conductivity and corrosion resistance, ensuring reliable performance in various environments.
Offers a secure and stable connection, reducing the risk of disconnection or signal loss.
Assembly Products 43031-0009 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Usage:
Maximum Wire Size:
Minimum Wire Size:
43031-0009 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
PCN Assembly/Origin - Multiple Devices Tooling 01/Mar/2017
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
Rochester Electronics
Hitano Enterprise
936012574
Molex
CONNECTOR ACCESSORY;
5-968221-1
TE Connectivity
TE Connectivity 5-968221-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 18 AWG, rated for 7.5A current. Ideal for applications requiring female contact gender and operating temperatures from -40 to 120°C.
M23053/5-106-9
Alpha Wire
ASSEMBLY ITEMS; IEC Conformity: NO; Construction: SINGLE WALL; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE;
1-640415-1
TE Connectivity 1-640415-1 is a nylon plug housing with -55 to 105 °C operating temp range. It's used for keying plugs and supports up to 0 AWG wire size, ideal for assembly applications.
02-09-2116
Molex 02-09-2116 is a male contact with round pin-socket design, made of brass material. It has a terminal length of 0.24 inch and supports wire sizes from 22 AWG to 18 AWG. Ideal for applications requiring a straight mounting style and crimp terminal type.
08-55-0102
Molex 08-55-0102 CONTACT features CRIMP terminals for 30-22 AWG wires. Made of BRASS, it has a 0.186" length and 0.062" cable entry. Ideal for FEMALE contacts in STRAIGHT mounting applications.
12124580
Delphi Connection Systems
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Material: BRASS; DIN Conformity: NO; Assembly Item Name: CONTACT; Additional Features: CONTACT FINISH: TIN;
M23053/5-102-0
ASSEMBLY ITEMS; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO;
39-00-0038
Molex 39-00-0038 CONTACT features CRIMP terminal type, BRASS material, and SQUARE PIN-SOCKET contact style. Ideal for applications with wire sizes ranging from 24 AWG to 18 AWG such as 5557, 30067, and more. Suitable for 0.051-0.122 inch cable entries in STRAIGHT mounting style.
17E-1657-09
Amphenol
The Amphenol 17E-1657-09 is a D-SUB CONNECTOR BACKSHELL made of ZINC ALLOY. It has a min cable entry of 0.21" and max cable entry of 0.32". Mounting options include SCREW (#4-40). Ideal for secure cable connections in various electronic assemblies.
12089040
Aptiv
Aptiv 12089040 CONTACT is a CRIMP terminal made of BRASS for FLRY-B cables. It has 0.055-0.075 inch cable entry, suitable for assembly products. Ideal for automotive wiring applications due to its precise crimping and durable material.
AW2S-D
13711542
Aptiv 13711542 CONTACT is a MALE CRIMP terminal for FLRY-B cables. Made of COPPER ALLOY, it accepts cable entries from 0.0472" to 0.063". Ideal for automotive wiring harness assemblies.
TXR40SJ00-1810AI
TE Connectivity's TXR40SJ00-1810AI is an Assembly Product with 0.313" min cable entry, 0.5" max cable entry, and 0 AWG max wire size. It operates b/w -65°C to 260°C, making it ideal for high temperature applications in various industries.
5054311100
33000-1004
1-794606-1
TE Connectivity 1-794606-1 is a stranded crimp terminal with a rated voltage of 250V and a max operating temperature of 105°C. It is commonly used in power applications, with approvals from CSA, UL, and VDE.
7810.6519.0
39-00-0218
The Molex 39-00-0218 CONTACT is a FEMALE CRIMP terminal with SQUARE PIN-SOCKET style, ideal for 16 AWG wires. Made of PHOSPHOR BRONZE, it has a 0.217" length and STRAIGHT mounting style. Perfect for various Assembly Products applications.
1SNA199336R2000
TERMINAL BLOCK ACCESSORY;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
43030-0007
Molex 43030-0007 CONTACT features CRIMP terminals for 24-20 AWG wires, rated at 8.5A current. Suitable for use with connectors like 43025/43645/44133, it has a 0.073" cable entry and is made of PHOSPHOR BRONZE material.
43030-0010
Molex 43030-0010 CONTACT features CRIMP terminal type, LOOSE contact design, and PHOSPHOR BRONZE material. Ideal for 30-26 AWG wires in applications like 43025, 43645, and 44133 assemblies with 0.05" cable entry.
43030-0012
Molex 43030-0012 CONTACT features CRIMP terminal type, PHOSPHOR BRONZE material, and SQUARE PIN-SOCKET contact design. Ideal for 30-26 AWG wires in applications like 43025, 43645, and 44133 assemblies with 0.05" cable entry.
43030-0011
The Molex 43030-0011 is a female crimp contact with a round pin socket design, suitable for use in receptacle assemblies. It supports wire sizes from 26 AWG to 30 AWG and features a 0.138 inch terminal length. This assembly product is made of phosphor bronze and has a max cable entry of 0.05 inch, ideal for straight mounting applications.
43030-0001
The Molex 43030-0001 contact is a CRIMP type terminal with CHAIN design, suitable for wire sizes ranging from 24 AWG to 20 AWG. It has a finish thickness of 40 and is commonly used in applications such as 43025, 43645, and 44133 assemblies.
43030-0009
The Molex 43030-0009 is a crimp terminal contact with a finish thickness of 30. It is commonly used in assemblies such as 43025, 43645, and 44133. With a rated current of 8.5A, it can accommodate wire sizes ranging from 24 AWG to 20 AWG.
43030-0038
CONNECTOR ACCESSORY; Manufacturer Series: 43030;
43031-0007
Molex 43031-0007 CONTACT features loose contact design, suitable for 24-20 AWG wires. With a 0.073" min cable entry and 0.137" terminal length, it is ideal for use with 43020, 43640, and 44300 assemblies. Made of phosphor bronze, this male contact has a straight mounting style.
43030-0002
Molex 43030-0002 contact features crimp terminal type, 15 finish thickness, and 105 °C max operating temp. Ideal for use with 43025/43645/44133 applications requiring female chain contact design.
43030-0003
The Molex 43030-0003 contact is designed for use with terminals 43025, 43645, and 44133. It features a finish thickness of 30, crimp terminal type, and chain contact design. Ideal for applications requiring a female contact gender, straight mounting style, and square pin-socket contact style.
43031-0001
Molex 43031-0001 CONTACT features CHAIN design, PHOSPHOR BRONZE material, and 0.073" cable entry. Ideal for 24-20 AWG wires in assemblies like 43020, 43640, and 44300.
43030-0004
Molex 43030-0004 CONTACT features CRIMP terminals, CHAIN contact design, and PHOSPHOR BRONZE material. Ideal for 43025/43645/44133 applications with wire sizes ranging from 30 AWG to 26 AWG. Rated for 8.5 A current with a 0.05" cable entry.
43030-0008
Molex 43030-0008 CONTACT features CRIMP terminals for 24-20 AWG wires, rated at 8.5A current. Ideal for use with 43025/43645/44133 assemblies, it has a 0.138" terminal length and 0.073" cable entry.
43030-0021
The Molex 43030-0021 is a female crimp receptacle contact with a terminal length of 0.138". It supports wire sizes from 24 AWG to 20 AWG and has a max cable entry of 0.73". Ideal for straight mounting applications, this contact is made of phosphor bronze and features a round pin socket design.
43031-0004
Molex 43031-0004 CONTACT features CHAIN design, PHOSPHOR BRONZE material, 0.137" terminal length. Ideal for 30-26 AWG wires with 0.05" cable entry. Compatible with 43020, 43640, and 44300 assemblies.
43031-0002
The Molex 43031-0002 CONTACT features a CRIMP terminal type with CHAIN contact design. It supports wire sizes from 24 AWG to 20 AWG and has a max cable entry of 0.073 inch. Ideal for use in assemblies such as 43020, 43640, and 44300.
43030-0006
Molex 43030-0006 is a female crimp receptacle contact with phosphor bronze material. It supports wire sizes from 26 AWG to 30 AWG and has a max cable entry of 0.05". Ideal for straight mounting applications requiring round pin-skt contacts.
43030-0005
Molex 43030-0005 is a female crimp receptacle contact with phosphor bronze material. It supports wire sizes from 30 AWG to 26 AWG, with a max cable entry of 0.05". Ideal for straight mounting applications requiring round pin-socket contact design.
43031-0008
CONNECTOR ACCESSORY; Contact Design: CHAIN; Additional Features: MATING: GOLD OVER NICKEL (50), TERMINATION: TIN (100) OVER NICKEL (50); Assembly Item Name: CONTACT; Minimum Wire Size: 24 AWG; Maximum Cable Entry: .073 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved