Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 43030-0012 CONTACT features CRIMP terminal type, PHOSPHOR BRONZE material, and SQUARE PIN-SOCKET contact design. Ideal for 30-26 AWG wires in applications like 43025, 43645, and 44133 assemblies with 0.05" cable entry.
Median Price
$0.182
Lifecycle Status
Suppliers In-Stock
40
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$0.134
100+ parts
-
1k+ parts
10k+ parts
$0.108
Interstate Connecting
$0.142
$0.115
Arrow
$0.154
$0.092
Verical
$0.158
$0.150
RS Americas
$0.306
$0.233
$0.187
Mouser Electronics
$0.320
$0.219
$0.199
$0.181
RS (Exports)
$0.330
$0.277
$0.235
Element14
$0.344
$0.237
$0.169
Farnell
$0.378
$0.225
$0.160
Adafruit Industries
$7.899
$7.504
TTI
$0.102
$0.100
$0.093
Master Electronics
$0.206
$0.178
NEP Electronics
DigiKey
$0.131
$0.127
PEI Genesis
Newark
$0.267
$0.209
Powell Electronics
$0.155
$0.147
Sager
TTI Europe
$0.114
$0.103
Chip1Stop
Digiode
$0.097
Nova Conductors
$0.135
Component Electronics Inc.
$0.230
$0.170
TME
$0.300
$0.214
$0.165
IBS Electronics
NexGen Digital
Vyrian
American Connector Supply Corp
Sensible Micro Corp
Prism Electronics
A2Z Electronics, Inc.
VNN
Brevan Electronics
Bisco
Mil-Aero Solutions, Inc.
Resion
ACDS - Activité Composants Distribution Service
NAC Semi
Semi Source
Electronics Depot
Corphita
Argo Parts USA
$0.123
Netroflash
$0.129
$0.126
Modulus Dynamics
$0.141
$0.140
$0.136
Semicontronic
$0.189
$0.184
$0.183
Continental Prestige Electronics
$0.299
$0.130
Andel Nordic
$1.345
$1.291
Aztec Data Supply Inc.
$3.506
Advanced Electronics
Assy Fe
Authorized Procurement Solutions
Glotronic Ltd.
Eastek
Perfect Parts
Robosynatics
$1.344
Lucentia Tech
Standard Data Resources (Excess)
Cyclops Electronics Ltd (Excess)
Wide range of compatibility for various applications, making it versatile and suitable for different projects.
Provides a sturdy and durable finish to ensure longevity and reliable performance.
Crimping terminals offer a secure and strong connection, reducing the risk of disconnection or malfunction.
Loose contact design allows for easy assembly and disassembly, making maintenance and repairs hassle-free.
Supports small wire sizes, making it suitable for delicate or intricate projects where precision is crucial.
Accommodates larger wire sizes for projects that require higher power handling or conductivity.
Ability to accommodate cables of up to 0.05 inch in diameter, providing flexibility in cable selection.
Compatible with male connectors, offering versatility in pairing with various components or devices.
Straight mounting style ensures easy integration and alignment with other components, enhancing overall product efficiency.
Square pin-socket design provides a secure and stable connection, minimizing the risk of connectivity issues or signal loss.
Phosphor bronze material offers excellent conductivity and corrosion resistance, ensuring reliable performance even in challenging environments.
Sufficient terminal length for secure connection and easy handling during installation or maintenance.
Assembly Products 43030-0012 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Usage:
Maximum Wire Size:
Minimum Wire Size:
PCN Assembly/Origin - Tooling 07/Dec/2018
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
1N4148
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
Continental Device India
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
Sensitron Semiconductor
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
Micro Commercial Components
Renesas Electronics
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
350551-6
TE Connectivity
The TE Connectivity 350551-6 is a universal mate-n-lok plug/socket housing with stranded construction and crimp terminals. Rated for 600V AC/DC, it has a max temp of 105°C and min temp of -55°C. With approvals from CSA and VDE, it's ideal for power applications with wire sizes ranging from 20-14 AWG.
202K132-25/86-0
TE Connectivity's 202K132-25/86-0, an Assembly Product, features a min cable entry of 5.9" and max operating temperature of 150°C. With a max wire size of 0 AWG, it is ideal for applications requiring a durable ELASTOMER material with a wide cable entry range up to 15".
1731110058
Molex
The Molex 1731110058 is a BACKSHELL assembly product designed for FCT D-SUB usage. It has a min cable entry of 0.315" and a max cable entry of 0.492". Made of zinc alloy, it can withstand temperatures ranging from -35°C to 100°C.
221-505/000-004
Wago
TERMINAL BLOCK ACCESSORY;
221-503/000-004
F22891-000
CONNECTOR ACCESSORY;
L17DM53745-7
Amphenol
The Amphenol L17DM53745-7 is a male contact assembly product with a round pin-socket contact style made of brass. It has a rated current of 20A and can operate at temperatures up to 155°C. This straight mounting terminal type with 20 finish thickness is commonly used in industrial applications requiring reliable electrical connections.
13697409
Delphi Connection Systems
CONNECTOR ACCESSORY; IEC Conformity: NO; Assembly Item Name: CONTACT; Material: COPPER ALLOY; DIN Conformity: NO; Minimum Cable Entry: .075 inch;
T3930102001-000
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 125 Cel; Design: POWER AND SIGNAL; Maximum Wire Size: 0 AWG;
249-119
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: MARKER CARRIER; IEC Conformity: NO;
9019190000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Minimum Wire Size: 12 AWG; Assembly Item Name: FERRULE; DIN Conformity: NO; Approvals (V): CSA; GOST; UL; VDE;
M23053/5-106-9
Dunbar Products
ASSEMBLY ITEMS; IEC Conformity: NO; Construction: SINGLE WALL; DIN Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN; MIL Conformity: NO;
1060-12-0166
TE Connectivity's 1060-12-0166 contact features crimp terminal type, stamped design, and copper alloy material. With a wire gauge of 12 AWG and rated current of 25 A, it is ideal for applications requiring male round pin-socket contacts in straight mounting style. Operating temperatures range from -55 to 125°C.
65307-001LF
Amphenol Communications Solutions
CONNECTOR ACCESSORY; Assembly Item Name: POLARIZING PLUG; DIN Conformity: NO; MIL Conformity: NO; Material: POLYAMIDE6/POLYAMIDE66; Approvals (V): UL;
AT60-202-16141
1-968855-1
TE Connectivity's 1-968855-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 17 AWG, rated for 15A current. Ideal for power applications, it has a temperature range of -40 to 130°C and accommodates cables from 0.051" to 0.083".
43375-0001
Molex 43375-0001 CONTACT features CRIMP terminal type, rated for 1000V AC/DC, with 18A current. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and BRASS material construction.
1650589-1
TE Connectivity's 1650589-1 is a stainless steel SCREW ITEM with M4 mounting option. It supports wire up to 0 AWG, operating b/w -40°C to 105°C. Ideal for assembly applications requiring durable and reliable screw fastening solutions.
16-02-0081
1-66100-9
TE Connectivity's 1-66100-9 is a crimp terminal with a contact resistance of 7.5 mohm. It is designed for use in CPC/G, M series connectors and can handle a max operating temperature of 90°C. With a rated current of 13A, it is suitable for power and signal applications with wire sizes ranging from 18 AWG to 16 AWG.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
43030-0007
Molex 43030-0007 CONTACT features CRIMP terminals for 24-20 AWG wires, rated at 8.5A current. Suitable for use with connectors like 43025/43645/44133, it has a 0.073" cable entry and is made of PHOSPHOR BRONZE material.
43030-0010
Molex 43030-0010 CONTACT features CRIMP terminal type, LOOSE contact design, and PHOSPHOR BRONZE material. Ideal for 30-26 AWG wires in applications like 43025, 43645, and 44133 assemblies with 0.05" cable entry.
43030-0011
The Molex 43030-0011 is a female crimp contact with a round pin socket design, suitable for use in receptacle assemblies. It supports wire sizes from 26 AWG to 30 AWG and features a 0.138 inch terminal length. This assembly product is made of phosphor bronze and has a max cable entry of 0.05 inch, ideal for straight mounting applications.
43030-0001
The Molex 43030-0001 contact is a CRIMP type terminal with CHAIN design, suitable for wire sizes ranging from 24 AWG to 20 AWG. It has a finish thickness of 40 and is commonly used in applications such as 43025, 43645, and 44133 assemblies.
43030-0009
The Molex 43030-0009 is a crimp terminal contact with a finish thickness of 30. It is commonly used in assemblies such as 43025, 43645, and 44133. With a rated current of 8.5A, it can accommodate wire sizes ranging from 24 AWG to 20 AWG.
43030-0038
CONNECTOR ACCESSORY; Manufacturer Series: 43030;
43031-0007
Molex 43031-0007 CONTACT features loose contact design, suitable for 24-20 AWG wires. With a 0.073" min cable entry and 0.137" terminal length, it is ideal for use with 43020, 43640, and 44300 assemblies. Made of phosphor bronze, this male contact has a straight mounting style.
43030-0002
Molex 43030-0002 contact features crimp terminal type, 15 finish thickness, and 105 °C max operating temp. Ideal for use with 43025/43645/44133 applications requiring female chain contact design.
43030-0003
The Molex 43030-0003 contact is designed for use with terminals 43025, 43645, and 44133. It features a finish thickness of 30, crimp terminal type, and chain contact design. Ideal for applications requiring a female contact gender, straight mounting style, and square pin-socket contact style.
43031-0001
Molex 43031-0001 CONTACT features CHAIN design, PHOSPHOR BRONZE material, and 0.073" cable entry. Ideal for 24-20 AWG wires in assemblies like 43020, 43640, and 44300.
43030-0004
Molex 43030-0004 CONTACT features CRIMP terminals, CHAIN contact design, and PHOSPHOR BRONZE material. Ideal for 43025/43645/44133 applications with wire sizes ranging from 30 AWG to 26 AWG. Rated for 8.5 A current with a 0.05" cable entry.
43030-0008
Molex 43030-0008 CONTACT features CRIMP terminals for 24-20 AWG wires, rated at 8.5A current. Ideal for use with 43025/43645/44133 assemblies, it has a 0.138" terminal length and 0.073" cable entry.
43030-0021
The Molex 43030-0021 is a female crimp receptacle contact with a terminal length of 0.138". It supports wire sizes from 24 AWG to 20 AWG and has a max cable entry of 0.73". Ideal for straight mounting applications, this contact is made of phosphor bronze and features a round pin socket design.
43031-0004
Molex 43031-0004 CONTACT features CHAIN design, PHOSPHOR BRONZE material, 0.137" terminal length. Ideal for 30-26 AWG wires with 0.05" cable entry. Compatible with 43020, 43640, and 44300 assemblies.
43031-0002
The Molex 43031-0002 CONTACT features a CRIMP terminal type with CHAIN contact design. It supports wire sizes from 24 AWG to 20 AWG and has a max cable entry of 0.073 inch. Ideal for use in assemblies such as 43020, 43640, and 44300.
43030-0006
Molex 43030-0006 is a female crimp receptacle contact with phosphor bronze material. It supports wire sizes from 26 AWG to 30 AWG and has a max cable entry of 0.05". Ideal for straight mounting applications requiring round pin-skt contacts.
43031-0009
Molex 43031-0009 CONTACT features loose contact design, suitable for 24-20 AWG wires. With 0.073" cable entry, it's used in assemblies like 43020, 43640, and 44300. Made of phosphor bronze with 0.137" terminal length, it's a male gender contact for straight mounting applications.
43030-0005
Molex 43030-0005 is a female crimp receptacle contact with phosphor bronze material. It supports wire sizes from 30 AWG to 26 AWG, with a max cable entry of 0.05". Ideal for straight mounting applications requiring round pin-socket contact design.
43031-0008
CONNECTOR ACCESSORY; Contact Design: CHAIN; Additional Features: MATING: GOLD OVER NICKEL (50), TERMINATION: TIN (100) OVER NICKEL (50); Assembly Item Name: CONTACT; Minimum Wire Size: 24 AWG; Maximum Cable Entry: .073 inch;
43030-0024
CONNECTOR ACCESSORY; Material: PHOSPHOR BRONZE; DIN Conformity: NO; Maximum Cable Entry: .05 inch; Contact Design: STRIP; Contact Style: RND PIN-SKT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved