Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 43030-0003 contact is designed for use with terminals 43025, 43645, and 44133. It features a finish thickness of 30, crimp terminal type, and chain contact design. Ideal for applications requiring a female contact gender, straight mounting style, and square pin-socket contact style.
Median Price
$0.083
Lifecycle Status
Suppliers In-Stock
48
In-Stock Inventory
1k+
Farnell
1+ parts
$0.075
100+ parts
-
1k+ parts
$0.062
10k+ parts
$0.060
PSC Electronics
$0.124
DigiKey
$0.190
$0.111
$0.087
Element14
$0.214
$0.142
$0.128
PEI Genesis
NEP Electronics
Newark
Verical
Powell Electronics
TTI
Master Electronics
Arrow
Heilind Electronics
TTI Europe
Mouser Electronics
Interstate Connecting
Sager
Chip1Stop
$0.044
$0.032
$0.031
RS Americas
$0.065
TestEquity
$0.070
Digiode
$0.073
DF Sales Co.
$0.080
Nova Conductors
$0.099
Jameco Electronics
IBS Electronics
Famous Connections Ltd
Vyrian
Chip Stock
NAC Semi
Bristol Electronics
Inventory MP
Rutronik
Sensible Micro Corp
LIBRA Elektronik GmbH
J2 Sourcing AB
Prism Electronics
Connector Distribution Corp
Right Parts Inc.
American Connector Supply Corp
VNN
PC Components Company LLC
Netsource Technology, Inc.
Elcom Components
LWI Electronics Inc
ACDS - Activité Composants Distribution Service
Quittner & Schimek s.r.o.
EMSNET
Semicontronic
$0.055
$0.054
$0.053
Corphita
$0.069
Argo Parts USA
$0.084
Modulus Dynamics
$0.093
Advanced Electronics
$0.096
$0.091
Continental Prestige Electronics
$0.103
Aztec Data Supply Inc.
$2.720
Andel Nordic
$9.442
$9.064
EMSNET (Excess)
Perfect Parts
Abacus Technologies
Eastek
Glotronic Ltd.
Authorized Procurement Solutions
GreenTree Electronics
Kepictronics
Assy Fe
Allen Electronics Distributors
$0.061
Futuretech Components
Netroflash
$0.097
$0.094
$0.092
Robosynatics
$0.089
Lucentia Tech
Can be used for multiple purposes, providing versatility and flexibility.
Provides durability and strength to the product, ensuring a long-lasting performance.
Crimp terminals ensure a secure and reliable connection, reducing the risk of loose or faulty connections.
The chain contact design allows for a continuous flow of current, enhancing the conductivity and efficiency of the product.
Specifically designed for contact purposes, ensuring precise and accurate connections.
Compatible with a range of wire sizes, offering flexibility in usage.
Can accommodate larger wire sizes, making it suitable for various applications.
Allows for easy insertion and connection of cables, improving the user experience.
Female contacts are commonly used for mating connections, providing a secure and stable connection.
Straight mounting style offers a simple and easy installation process, saving time and effort.
Square pin-socket contacts provide a reliable and stable connection, reducing the risk of signal loss or interference.
Phosphor bronze material offers excellent conductivity and corrosion resistance, ensuring a reliable performance.
The terminal length provides a secure connection point, reducing the risk of damage or disconnection.
Assembly Products 43030-0003 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Usage:
Maximum Wire Size:
Minimum Wire Size:
PCN Packaging - Multiple Devices Packaging 18/Jul/2019
PCN Other - Multiple Devices Shipping Location 20/Mar/2020
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
BAV99
Siemens
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Kec
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Nexperia
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
1N4148WS
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
RC0402FR-0710KL
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
FDN306P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
DZ5CE003L6
Schneider Electric Sa
Schneider Electric Sa's DZ5CE003L6 ferrule has NFC approval, operates b/w -20°C to 105°C, and supports up to 24 AWG wire. Ideal for electrical assemblies requiring copper material with precise wire termination in various applications.
USBTJ-04
Global Connector Technology
CONNECTOR ACCESSORY; Usage: USB4715; MIL Conformity: NO; Assembly Item Name: GASKET; IEC Conformity: NO; Material: SILICONE;
170204-2
TE Connectivity
TE Connectivity's 170204-2 CONTACT features CRIMP terminal type, rated voltage of 250V, and operating temperature up to 105°C. Ideal for SIGNAL applications with wire gauge ranging from 26 AWG to 20 AWG and a max current rating of 2A.
1-66101-9
TE Connectivity's 1-66101-9 is a crimp terminal contact designed for CPC/G Series/M Series connectors. With a finish thickness of 100, it can handle wire gauges ranging from 16 AWG to 18 AWG and has a rated current of 13 A. This connector accessory is made of brass and is suitable for power and signal applications.
221-523/000-004
Wago
TERMINAL BLOCK ACCESSORY;
W3S-1939-P012
TE Connectivity's W3S-1939-P012, part of Assembly Products, is designed for DT SERIES applications. With a temperature range of -55 to 125°C, it accommodates up to 0 AWG wire size. The POWER AND SIGNAL design features POLYBUTYLENE TEREPHTHALATE material for reliable performance.
830009502
Molex
CONNECTOR ACCESSORY;
3200548
Phoenix Contact
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Material: COPPER ALLOY; Approvals (V): CSA; UL; IEC Conformity: NO; Maximum Operating Temperature: 105 Cel;
SVF-61T-P2.0
J S T Mfg
SVF-61T-P2.0 by J S T Mfg is a CSA, TUV, UL approved VL connector with crimp terminal type for 20-14 AWG wires. It has a rated current of 20A and can handle up to 600V AC/DC. Ideal for applications requiring female contacts, straight mounting style, and operating temperatures from -25°C to 90°C.
DF11-2428SC
Hirose Electric
1062-16-0144
TE Connectivity's 1062-16-0144 CONTACT features CRIMP terminal type, suitable for wire gauges 14-18 AWG. With a rated current of 13A and operating temperatures from -55 to 150°C, it is ideal for female contact applications with cable entries ranging from 0.075 to 0.14 inch.
8599-0720-900
Souriau
1418884-3
TE Connectivity's 1418884-3 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 15 AWG and rated current of 13 A. Ideal for applications requiring a female contact, with cable entry ranging from 0.074" to 0.094".
02-08-1003
Molex 02-08-1003 CONTACT is a FEMALE CRIMP terminal made of BRASS. It features STRAIGHT mounting style and SQ PIN-SKT contact style. Ideal for assembly products requiring reliable electrical connections in various applications.
776363-1
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -40 Cel;
0460-204-0490
TE Connectivity's 0460-204-0490 contact features crimp terminal type, machined contact design, and can handle wire gauge up to 6 AWG. With a rated current of 100A, it is ideal for applications requiring male gender contacts in straight mounting style with round pin/socket contact design.
5913-BK
Anderson Power Products
CLIPFIX35
TERMINAL BLOCK ACCESSORY; Assembly Item Name: END CLAMP; IEC Conformity: NO; Material: PA; Approvals (V): UL; DIN Conformity: NO;
M23053/16-004-0
TE Connectivity's M23053/16-004-0 is a SINGLE WALL TAPER SLEEVE with CROSSLINKED ELASTOMERIC POLYOLEFIN jacket. It supports wire up to 0 AWG, operating from -75°C to 150°C. Ideal for electrical insulation in various applications.
CC81L-2426-01-L
Samtec
CC81L-2426-01-L by Samtec is a female contact with crimp terminal type, suitable for ISD2 SERIES HOUSING. It features 10 finish thickness, accommodates wire sizes from 26 AWG to 24 AWG, and has a straight mounting style. Made of beryllium copper, it is ideal for various assembly applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
43030-0007
Molex 43030-0007 CONTACT features CRIMP terminals for 24-20 AWG wires, rated at 8.5A current. Suitable for use with connectors like 43025/43645/44133, it has a 0.073" cable entry and is made of PHOSPHOR BRONZE material.
43030-0010
Molex 43030-0010 CONTACT features CRIMP terminal type, LOOSE contact design, and PHOSPHOR BRONZE material. Ideal for 30-26 AWG wires in applications like 43025, 43645, and 44133 assemblies with 0.05" cable entry.
43030-0012
Molex 43030-0012 CONTACT features CRIMP terminal type, PHOSPHOR BRONZE material, and SQUARE PIN-SOCKET contact design. Ideal for 30-26 AWG wires in applications like 43025, 43645, and 44133 assemblies with 0.05" cable entry.
43030-0011
The Molex 43030-0011 is a female crimp contact with a round pin socket design, suitable for use in receptacle assemblies. It supports wire sizes from 26 AWG to 30 AWG and features a 0.138 inch terminal length. This assembly product is made of phosphor bronze and has a max cable entry of 0.05 inch, ideal for straight mounting applications.
43030-0001
The Molex 43030-0001 contact is a CRIMP type terminal with CHAIN design, suitable for wire sizes ranging from 24 AWG to 20 AWG. It has a finish thickness of 40 and is commonly used in applications such as 43025, 43645, and 44133 assemblies.
43030-0009
The Molex 43030-0009 is a crimp terminal contact with a finish thickness of 30. It is commonly used in assemblies such as 43025, 43645, and 44133. With a rated current of 8.5A, it can accommodate wire sizes ranging from 24 AWG to 20 AWG.
43030-0038
CONNECTOR ACCESSORY; Manufacturer Series: 43030;
43031-0007
Molex 43031-0007 CONTACT features loose contact design, suitable for 24-20 AWG wires. With a 0.073" min cable entry and 0.137" terminal length, it is ideal for use with 43020, 43640, and 44300 assemblies. Made of phosphor bronze, this male contact has a straight mounting style.
43030-0002
Molex 43030-0002 contact features crimp terminal type, 15 finish thickness, and 105 °C max operating temp. Ideal for use with 43025/43645/44133 applications requiring female chain contact design.
43031-0001
Molex 43031-0001 CONTACT features CHAIN design, PHOSPHOR BRONZE material, and 0.073" cable entry. Ideal for 24-20 AWG wires in assemblies like 43020, 43640, and 44300.
43030-0004
Molex 43030-0004 CONTACT features CRIMP terminals, CHAIN contact design, and PHOSPHOR BRONZE material. Ideal for 43025/43645/44133 applications with wire sizes ranging from 30 AWG to 26 AWG. Rated for 8.5 A current with a 0.05" cable entry.
43030-0008
Molex 43030-0008 CONTACT features CRIMP terminals for 24-20 AWG wires, rated at 8.5A current. Ideal for use with 43025/43645/44133 assemblies, it has a 0.138" terminal length and 0.073" cable entry.
43030-0021
The Molex 43030-0021 is a female crimp receptacle contact with a terminal length of 0.138". It supports wire sizes from 24 AWG to 20 AWG and has a max cable entry of 0.73". Ideal for straight mounting applications, this contact is made of phosphor bronze and features a round pin socket design.
43031-0004
Molex 43031-0004 CONTACT features CHAIN design, PHOSPHOR BRONZE material, 0.137" terminal length. Ideal for 30-26 AWG wires with 0.05" cable entry. Compatible with 43020, 43640, and 44300 assemblies.
43031-0002
The Molex 43031-0002 CONTACT features a CRIMP terminal type with CHAIN contact design. It supports wire sizes from 24 AWG to 20 AWG and has a max cable entry of 0.073 inch. Ideal for use in assemblies such as 43020, 43640, and 44300.
43030-0006
Molex 43030-0006 is a female crimp receptacle contact with phosphor bronze material. It supports wire sizes from 26 AWG to 30 AWG and has a max cable entry of 0.05". Ideal for straight mounting applications requiring round pin-skt contacts.
43031-0009
Molex 43031-0009 CONTACT features loose contact design, suitable for 24-20 AWG wires. With 0.073" cable entry, it's used in assemblies like 43020, 43640, and 44300. Made of phosphor bronze with 0.137" terminal length, it's a male gender contact for straight mounting applications.
43030-0005
Molex 43030-0005 is a female crimp receptacle contact with phosphor bronze material. It supports wire sizes from 30 AWG to 26 AWG, with a max cable entry of 0.05". Ideal for straight mounting applications requiring round pin-socket contact design.
43031-0008
CONNECTOR ACCESSORY; Contact Design: CHAIN; Additional Features: MATING: GOLD OVER NICKEL (50), TERMINATION: TIN (100) OVER NICKEL (50); Assembly Item Name: CONTACT; Minimum Wire Size: 24 AWG; Maximum Cable Entry: .073 inch;
43030-0023
CONNECTOR ACCESSORY; IEC Conformity: NO; Mounting Style: STRAIGHT; Contact Style: RND PIN-SKT; Contact Design: STRIP; MIL Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved