Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 43030-0005 is a female crimp receptacle contact with phosphor bronze material. It supports wire sizes from 30 AWG to 26 AWG, with a max cable entry of 0.05". Ideal for straight mounting applications requiring round pin-socket contact design.
Median Price
$0.121
Lifecycle Status
Suppliers In-Stock
36
In-Stock Inventory
1k+
Newark
1+ parts
$0.065
100+ parts
$0.058
1k+ parts
$0.056
10k+ parts
-
Farnell
Element14
$0.118
$0.113
Arrow
$0.174
$0.084
$0.070
DigiKey
$0.190
$0.094
$0.079
Heilind Electronics
Master Electronics
Verical
TTI
NEP Electronics
Mouser Electronics
Interstate Connecting
Avnet
TTI Europe
Sager
Powell Electronics
Chip1Stop
PSC Electronics
DF Sales Co.
$0.020
Digiode
$0.039
TestEquity
$0.050
TME
$0.053
Maritex
$0.078
$0.064
$0.051
Nova Conductors
Component Electronics Inc.
$0.150
$0.120
$0.100
NAC Semi
Vyrian
IBS Electronics
Martec Srl
Component Sense
VNN
Sunrise Surplus Inc.
Lantek
MISTER SPROCKETS
Brevan Electronics
Corphita
$0.037
Argo Parts USA
$0.073
$0.071
Modulus Dynamics
$0.076
Aranea Global
$0.077
$0.074
Advanced Electronics
Semicontronic
$0.117
$0.116
Continental Prestige Electronics
$0.183
$0.085
$0.067
Aztec Data Supply Inc.
$7.094
Andel Nordic
$10.128
$9.723
Perfect Parts
EMSNET (Excess)
Abacus Technologies
Assy Fe
Glotronic Ltd.
Eastek
GreenTree Electronics
Authorized Procurement Solutions
Kepictronics
Standard Data Resources (Excess)
Futuretech Components
Infinite Electronics LLP (Excess)
The usage as a receptacle makes this product ideal for connecting with male connectors or pins.
Crimp terminals provide a secure and reliable connection, ensuring the wires are securely attached.
The strip contact design allows for easy insertion and removal of wires, simplifying the assembly process.
Capable of accommodating wires as small as 30 AWG, making it versatile for a wide range of wire sizes.
With a maximum wire size of 26 AWG, this product can handle larger wire gauges while still maintaining a secure connection.
The maximum cable entry size of 0.05 inch ensures compatibility with a variety of cable sizes for added flexibility.
The female contact gender allows this product to mate with male connectors or pins, expanding its compatibility.
The straight mounting style allows for easy installation and alignment in a straight line configuration.
The round pin socket contact style provides a reliable and consistent connection for optimal performance.
Phosphor bronze material offers excellent conductivity and durability, ensuring a long-lasting and reliable product.
The terminal length of 0.138 inch provides ample space for wire insertion, ensuring a secure and stable connection.
Assembly Products 43030-0005 attributes and parameters. Explore more Assembly Products devices from Molex
Assembly Item Name:
Maximum Cable Entry:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Usage:
Maximum Wire Size:
Minimum Wire Size:
43030-0005 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
PCN Packaging - Standardize Packaging 17/Apr/2018 Multiple Devices Packaging 18/Jul/2019
PCN Other - Multiple Devices Shipping Location 20/Mar/2020
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
1N4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
BAV99-7-F
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
Shandong Yiguang Electronic Joint Stock
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
8599-0720-900
Souriau-sunbank Connection Technologies
CONNECTOR ACCESSORY;
12048074
Aptiv
CONNECTOR ACCESSORY; Contact Gender: FEMALE; MIL Conformity: NO; Mounting Style: STRAIGHT; Additional Features: CONTACT FINISH: TIN; IEC Conformity: NO;
FMK1G
Molex
FMK1G by Molex is an assembly product with UL approval. It features a max operating temperature of 100°C and a min operating temperature of -35°C. The hood, made of zinc, can be mounted using screws or #4-40 hardware. Ideal for various applications requiring durable and reliable assembly solutions.
VN020160002(1)
Amphenol
Amphenol's VN020160002(1) features crimp terminal type, 600V AC/DC voltage rating, and 14A current. Ideal for applications requiring stamped contact design, with wire sizes ranging from 26-16 AWG. Suitable for use in environments with temperatures b/w -40 to 125°C.
39-00-0038
Molex 39-00-0038 CONTACT features CRIMP terminal type, BRASS material, and SQUARE PIN-SOCKET contact style. Ideal for applications with wire sizes ranging from 24 AWG to 18 AWG such as 5557, 30067, and more. Suitable for 0.051-0.122 inch cable entries in STRAIGHT mounting style.
1123343-1
TE Connectivity's 1123343-1, a CRIMP terminal with stamped contact design, supports wire gauge 20 (AWG) and cross section area of 0.56 mm2. It operates b/w -40 to 120 °C and handles rated current of 4 A. Ideal for applications requiring female contact gender and cable entry ranging from 0.037 to 0.067 inch.
16-02-0109
WM-3P
TE Connectivity's WM-3P, part of Assembly Products, is designed for DTM SERIES. With a temp range of -55 to 125 °C, it supports up to 0 AWG wire size. Made of PBT, it suits POWER AND SIGNAL applications.
13697415
Aptiv 13697415 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it has FEMALE contact gender with 0.0748" to 0.0945" cable entry. Ideal for automotive wiring harness assembly due to its precise crimping and compatibility with specified cable types.
5-1532137-9
CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: YES; Manufacturer Series: 1532137; DIN Conformity: NO; Assembly Item Name: JACKPOST KIT;
293726-1
M23053/5-111-9
3m Electronic Products Division
ASSEMBLY ITEMS; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; MIL Conformity: NO; Construction: SINGLE WALL; IEC Conformity: NO;
216-208
Wago
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 10 AWG; MIL Conformity: NO; Assembly Item Name: FERRULE; IEC Conformity: NO; Additional Features: STANDARD: DIN 46228;
3030514
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Mounting Style: STRAIGHT; MIL Conformity: NO; IEC Conformity: NO; Assembly Item Name: END COVER; DIN Conformity: NO;
08-55-0101
Molex 08-55-0101 contact features crimp terminal type, chain contact design, and brass material. Ideal for applications requiring female contacts with compression style in straight mounting. Supports wire sizes from 30 AWG to 22 AWG with a finish thickness of 15.
0460-215-16141
TE Connectivity's 0460-215-16141 is a male power contact with crimp terminal type, suitable for 14 AWG wire. It has a rated current of 13A and operates b/w -55°C to 125°C. Ideal for applications requiring straight mounting, such as power assemblies.
9019120000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; Maximum Wire Size: 16 AWG; Approvals (V): CSA; UL; VDE; IEC Conformity: NO; DIN Conformity: NO; Assembly Item Name: FERRULE;
12103881
CONNECTOR ACCESSORY; Material: COPPER ALLOY; DIN Conformity: NO; Maximum Cable Entry: .079 inch; MIL Conformity: NO; Additional Features: CONTACT FINISH: TIN;
248-501
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: MARKING ITEM;
12045773
Delphi Connection Systems
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Terminal Type: CRIMP; DIN Conformity: NO; Maximum Cable Entry: .109 inch; IEC Conformity: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
43030-0007
Molex 43030-0007 CONTACT features CRIMP terminals for 24-20 AWG wires, rated at 8.5A current. Suitable for use with connectors like 43025/43645/44133, it has a 0.073" cable entry and is made of PHOSPHOR BRONZE material.
43030-0010
Molex 43030-0010 CONTACT features CRIMP terminal type, LOOSE contact design, and PHOSPHOR BRONZE material. Ideal for 30-26 AWG wires in applications like 43025, 43645, and 44133 assemblies with 0.05" cable entry.
43030-0012
Molex 43030-0012 CONTACT features CRIMP terminal type, PHOSPHOR BRONZE material, and SQUARE PIN-SOCKET contact design. Ideal for 30-26 AWG wires in applications like 43025, 43645, and 44133 assemblies with 0.05" cable entry.
43030-0011
The Molex 43030-0011 is a female crimp contact with a round pin socket design, suitable for use in receptacle assemblies. It supports wire sizes from 26 AWG to 30 AWG and features a 0.138 inch terminal length. This assembly product is made of phosphor bronze and has a max cable entry of 0.05 inch, ideal for straight mounting applications.
43030-0001
The Molex 43030-0001 contact is a CRIMP type terminal with CHAIN design, suitable for wire sizes ranging from 24 AWG to 20 AWG. It has a finish thickness of 40 and is commonly used in applications such as 43025, 43645, and 44133 assemblies.
43030-0009
The Molex 43030-0009 is a crimp terminal contact with a finish thickness of 30. It is commonly used in assemblies such as 43025, 43645, and 44133. With a rated current of 8.5A, it can accommodate wire sizes ranging from 24 AWG to 20 AWG.
43030-0038
CONNECTOR ACCESSORY; Manufacturer Series: 43030;
43031-0007
Molex 43031-0007 CONTACT features loose contact design, suitable for 24-20 AWG wires. With a 0.073" min cable entry and 0.137" terminal length, it is ideal for use with 43020, 43640, and 44300 assemblies. Made of phosphor bronze, this male contact has a straight mounting style.
43030-0002
Molex 43030-0002 contact features crimp terminal type, 15 finish thickness, and 105 °C max operating temp. Ideal for use with 43025/43645/44133 applications requiring female chain contact design.
43030-0003
The Molex 43030-0003 contact is designed for use with terminals 43025, 43645, and 44133. It features a finish thickness of 30, crimp terminal type, and chain contact design. Ideal for applications requiring a female contact gender, straight mounting style, and square pin-socket contact style.
43031-0001
Molex 43031-0001 CONTACT features CHAIN design, PHOSPHOR BRONZE material, and 0.073" cable entry. Ideal for 24-20 AWG wires in assemblies like 43020, 43640, and 44300.
43030-0004
Molex 43030-0004 CONTACT features CRIMP terminals, CHAIN contact design, and PHOSPHOR BRONZE material. Ideal for 43025/43645/44133 applications with wire sizes ranging from 30 AWG to 26 AWG. Rated for 8.5 A current with a 0.05" cable entry.
43030-0008
Molex 43030-0008 CONTACT features CRIMP terminals for 24-20 AWG wires, rated at 8.5A current. Ideal for use with 43025/43645/44133 assemblies, it has a 0.138" terminal length and 0.073" cable entry.
43030-0021
The Molex 43030-0021 is a female crimp receptacle contact with a terminal length of 0.138". It supports wire sizes from 24 AWG to 20 AWG and has a max cable entry of 0.73". Ideal for straight mounting applications, this contact is made of phosphor bronze and features a round pin socket design.
43031-0004
Molex 43031-0004 CONTACT features CHAIN design, PHOSPHOR BRONZE material, 0.137" terminal length. Ideal for 30-26 AWG wires with 0.05" cable entry. Compatible with 43020, 43640, and 44300 assemblies.
43031-0002
The Molex 43031-0002 CONTACT features a CRIMP terminal type with CHAIN contact design. It supports wire sizes from 24 AWG to 20 AWG and has a max cable entry of 0.073 inch. Ideal for use in assemblies such as 43020, 43640, and 44300.
43030-0006
Molex 43030-0006 is a female crimp receptacle contact with phosphor bronze material. It supports wire sizes from 26 AWG to 30 AWG and has a max cable entry of 0.05". Ideal for straight mounting applications requiring round pin-skt contacts.
43031-0009
Molex 43031-0009 CONTACT features loose contact design, suitable for 24-20 AWG wires. With 0.073" cable entry, it's used in assemblies like 43020, 43640, and 44300. Made of phosphor bronze with 0.137" terminal length, it's a male gender contact for straight mounting applications.
43031-0008
CONNECTOR ACCESSORY; Contact Design: CHAIN; Additional Features: MATING: GOLD OVER NICKEL (50), TERMINATION: TIN (100) OVER NICKEL (50); Assembly Item Name: CONTACT; Minimum Wire Size: 24 AWG; Maximum Cable Entry: .073 inch;
43030-0026
CONNECTOR ACCESSORY; Minimum Wire Size: 30 AWG; Maximum Wire Size: 26 AWG; Contact Style: RND PIN-SKT; Contact Design: STRIP; Mounting Style: STRAIGHT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved