Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's M23053/16-003-0 is a SINGLE WALL TAPER SLEEVE with CROSSLINKED ELASTOMERIC POLYOLEFIN jacket. It supports wire up to 0 AWG, operating b/w -75°C to 150°C. Ideal for various assembly applications requiring high temperature resistance and robust insulation.
Median Price
$5.300
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
$6.041
100+ parts
-
1k+ parts
10k+ parts
TTI
$4.560
$3.540
Powell Electronics
$2.890
$2.800
Verical
$6.480
$4.140
$3.780
AE Petsche
CDM Electronics
Electro Enterprises
$2.604
$2.216
$1.796
Nova Conductors
$3.410
Vyrian
FDH Electronics
NAC Semi
Electronic Expediters
Kallista Electronics Ltd
Semicontronic
$2.460
$2.398
$2.386
Argo Parts USA
Continental Prestige Electronics
$3.342
Advanced Electronics
$3.512
$3.337
Aztec Data Supply Inc.
$6.909
Authorized Procurement Solutions
Robosynatics
$5.384
Lucentia Tech
GreenTree Electronics
Speed Components Ltd (Excess)
Single wall construction provides a lightweight and flexible design, making it easy to work with and install.
Crosslinked elastomeric polyolefin jacket material offers excellent durability and resistance to heat, chemicals, and abrasion, ensuring a long-lasting and reliable product.
With a high maximum operating temperature of 150°C, this product is suitable for use in a wide range of environments and applications.
The low minimum operating temperature of -75°C allows this product to be used in extreme cold conditions without compromising performance.
The taper sleeve design of this product ensures a snug and secure fit when connecting wires or cables, reducing the risk of electrical failures or shorts.
With a maximum wire size of 0 AWG, this product is capable of handling heavy-duty electrical connections with ease, making it a versatile option for various applications.
Assembly Products M23053/16-003-0 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Assembly Item Name:
Connector Accessory Type:
Construction:
DIN Conformity:
IEC Conformity:
Jacket Material:
MIL Conformity:
Maximum Operating Temperature:
Minimum Operating Temperature:
Wire Gauge (AWG):
Maximum Wire Size:
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
1N4148WS
Surge Components
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
1554216002
Molex
WIRE AND CABLE;
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
Gec Plessey Semiconductors
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
Continental Device India
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
39-00-0078
Molex 39-00-0078 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications with wire size up to 16 AWG and cable entry of 0.122". Commonly used in assemblies for connectors like 5557, 30067, 44516 OR 42474.
281934-3
TE Connectivity
CONNECTOR ACCESSORY; DIN Conformity: NO; Maximum Operating Temperature: 130 Cel; Material: LSR; Assembly Item Name: SEALING ITEM; MIL Conformity: NO;
500588001
Molex 500588001 is a UL approved assembly product with crimp terminal type. It has a rated current of 1.5A, contact resistance of 20 mohm, and operating temperature range from -40 to 105 °C. Primarily used for 51021 HOUSING applications due to its FEMALE contact gender and BLADE PIN-SKT design.
962835-3
TE Connectivity's 962835-3 is a FEMALE contact assembly product with 0.094" min cable entry and 2.62 mm² cross section area for 17-13 AWG wires. Ideal for DISCRETE WIRE applications, it features STRAIGHT mounting style and PHOSPHOR BRONZE material with 0.146" max cable entry.
1-104480-7
TE Connectivity 1-104480-7 is a crimp terminal with 300V AC/DC rating, suitable for discrete wire applications. Featuring copper alloy construction, it has a contact resistance of 12 mΩ and can accommodate wire sizes from 26 to 22 AWG. With approvals from CSA and UL, this CONTACT is designed for power and signal connections in various assemblies.
13663718
Aptiv
CONNECTOR ACCESSORY;
293726-1
221-505/000-004
Wago
TERMINAL BLOCK ACCESSORY;
08-55-0124
Molex 08-55-0124 CONTACT features CRIMP terminal type for 22-30 AWG wire sizes. Designed for SIGNAL applications, it has FEMALE contact gender with COMPRESSION style in BRASS material. Ideal for 0.062" cable entry, with a finish thickness of 15, this assembly product is perfect for various electronic connections.
02-09-1119
Molex 02-09-1119 CONTACT features CRIMP terminals for 22-18 AWG wires. FEMALE gender, BRASS material, and ROUND PIN-SOCKET design make it ideal for STRAIGHT mounting in Assembly Products. With a 0.24" terminal length and 20 finish thickness, it ensures secure connections in various applications.
3022276
Phoenix Contact
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; Approvals (V): UL; Material: PA; Mounting Style: STRAIGHT;
1SET111008R0000
TE Connectivity's 1SET111008R0000 is a STRANDED assembly product with POLYPROPYLENE insulator. It supports up to 16 AWG wire gauge and operates at max 105°C temperature. Ideal for applications requiring DISCRETE WIRE connections with STRAIGHT mounting style.
5748676-2
TE Connectivity 5748676-2 is a backshell with 2 shell sizes, shielding, and 0.185" min cable entry. Ideal for plug/receptacle applications with max temp of 105°C. Features zinc alloy material, #4-40 screw mounting options, and supports up to 0 AWG wire size.
W2P
TE Connectivity's W2P is an Assembly Product for DT SERIES, with a max operating temp of 125°C and min of -55°C. It features POWER AND SIGNAL design, POLYBUTYLENE TEREPHTHALATE material, and supports up to 0 AWG wire size. Ideal for applications requiring high temperature resistance and robust electrical connections.
3-2198617-7
TE Connectivity 3-2198617-7 backshell has 4 shell sizes with shielding. It supports up to 0 AWG wire size, made of ABS material. Mounting options include #4-40 screw for various applications in Assembly Products category.
1011-229-0205
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel; Wire Gauge (AWG): 0; Contact Gender: FEMALE; Minimum Operating Temperature: -55 Cel;
350218-1
TE Connectivity 350218-1 is a universal mate-n-lok plug and cap housing with crimp terminal type. It has a rated voltage of 600V, rated current of 19A, and wire gauge of 14AWG. Ideal for power applications, it features stranded construction, brass material, and approvals from CSA, UL, VDE.
12124580
Aptiv 12124580 is a CRIMP CONTACT with FEMALE ROUND PIN-SOCKET made of BRASS. It has 0.156" Max Cable Entry and STRAIGHT Mounting Style. Ideal for assembly products requiring reliable electrical connections.
AWM-12P
Amphenol
09330006102
Harting Electronics & Kg
09330006102 by Harting Electronics & Kg is a HAN E CONNECTOR with CRIMP terminals for 14 AWG wire. It has approvals for IEC 60664-1 and IEC 61984, rated at 16 A current with male contact gender. The CONTACT features copper alloy material, 1 mohm resistance, RND PIN-SKT style, and STRAIGHT mounting suitable for various assembly applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
M23053/16-004-0
Sumitomo Electric Industries
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; Assembly Item Name: TAPER SLEEVE; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO;
TE Connectivity's M23053/16-004-0 is a SINGLE WALL TAPER SLEEVE with CROSSLINKED ELASTOMERIC POLYOLEFIN jacket. It supports wire up to 0 AWG, operating from -75°C to 150°C. Ideal for electrical insulation in various applications.
3m Electronic Products Division
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; Construction: SINGLE WALL; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE;
Dunbar Products
ASSEMBLY ITEMS; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; Construction: SINGLE WALL; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; DIN Conformity: NO;
M23053/16-003-0
ASSEMBLY ITEMS; Construction: SINGLE WALL; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; MIL Conformity: NO; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN;
ASSEMBLY ITEMS; IEC Conformity: NO; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; Construction: SINGLE WALL; DIN Conformity: NO; MIL Conformity: NO;
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; Construction: SINGLE WALL;
M23053/5-102-0
Alpha Wire
ASSEMBLY ITEMS; IEC Conformity: NO; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO;
M23053/5-103-9
Insultab
ASSEMBLY ITEMS; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN; Construction: SINGLE WALL;
ASSEMBLY ITEMS; Construction: SINGLE WALL; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN;
Brady
ASSEMBLY ITEMS; IEC Conformity: NO; Construction: SINGLE WALL; Jacket Material: CROSSLINKED POLYOLEFIN; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE;
ASSEMBLY ITEMS; DIN Conformity: NO; IEC Conformity: NO; Construction: SINGLE WALL; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE;
ASSEMBLY ITEMS; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN; Construction: SINGLE WALL;
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED POLYOLEFIN; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; IEC Conformity: NO;
M23053/5-111-9
ASSEMBLY ITEMS; Construction: SINGLE WALL; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN;
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED POLYOLEFIN; IEC Conformity: NO; Construction: SINGLE WALL; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE;
ASSEMBLY ITEMS; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; MIL Conformity: NO; Construction: SINGLE WALL; IEC Conformity: NO;
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED POLYOLEFIN; DIN Conformity: NO; IEC Conformity: NO; Construction: SINGLE WALL; MIL Conformity: NO;
ASSEMBLY ITEMS; IEC Conformity: NO; Construction: SINGLE WALL; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE;
M23053/16-002-0
ASSEMBLY ITEMS; Assembly Item Name: TAPER SLEEVE; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; IEC Conformity: NO; Construction: SINGLE WALL; DIN Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved