Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1-794606-2 is a crimp terminal with approvals from CSA, UL, and VDE. Featuring stranded construction, it has a rated voltage of 250V and can accommodate wire sizes ranging from 24 to 20 AWG. Ideal for power applications with a max current of 5A, this female contact is designed for use in discrete wire cables up to 0.06 inch entry size.
Median Price
$0.152
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.075
100+ parts
-
1k+ parts
10k+ parts
RS (Exports)
$0.130
Newark
$0.175
$0.128
$0.108
$0.101
DigiKey
$0.190
$0.137
$0.116
$0.109
TE Connectivity
$0.230
$0.150
$0.110
Element14
$0.242
$0.166
$0.139
Mouser Electronics
Verical
Master Electronics
$0.085
Powell Electronics
TTI
TTI Europe
Arrow
Interstate Connecting
Chip1Stop
$0.086
$0.077
$0.072
Heilind Electronics
Farnell
Nova Conductors
$0.105
IBS Electronics
Vyrian
NAC Semi
TME
Electro Sonic
LIBRA Elektronik GmbH
Rapid Electronics
Q Components
Goldney Electronics S.L.
Lantek
VNN
Semtec, LLC
Bisco
Argo Parts USA
$0.102
Semicontronic
$0.111
CoreStaff
$0.169
$0.122
$0.069
$0.064
Aztec Data Supply Inc.
$2.766
Eastek
EMSNET (Excess)
Abacus Technologies
GreenTree Electronics
Glotronic Ltd.
Continental Prestige Electronics
$0.053
Kepictronics
Authorized Procurement Solutions
Bastille Electronics
Robosynatics
Lucentia Tech
$7.450
$7.298
These approvals ensure that the product meets industry standards for safety and quality, giving customers peace of mind when using the product.
The high rated voltage allows this product to handle a wide range of applications and electrical systems, making it versatile and reliable.
The high maximum operating temperature ensures that the product can withstand heat and operate effectively in various environments, enhancing its durability.
The use of a thicker wire gauge allows for greater current carrying capacity and reduces the risk of overheating, ensuring safe and efficient operation.
Phosphor bronze is a durable and corrosion-resistant material that ensures longevity and reliability of the product, making it a wise choice for long-term use.
Assembly Products 1-794606-2 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Additional Features:
Approvals (V):
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Cable Types:
Connector Accessory Type:
Construction:
Contact Gender:
Cross Section Area:
DIN Conformity:
Design:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Rated DC Voltage:
Terminal Type:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
1-794606-2 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
PCN Design/Specification - Multiple Drawings Document Clarification 23/Apr/2019
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
Transys Electronics
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
Weitron Technology
1-206062-6
TE Connectivity's 1-206062-6 cable clamp is UL approved with shell size 11. It accommodates up to 0 AWG wire and 0.329" cable entry, made of polyethylene for straight mounting with a 5/8-24 UNEF-2B screw option. Ideal for securing cables in various assembly applications.
1062-12-0166-PS
TE Connectivity's 1062-12-0166-PS is a FEMALE CRIMP CONTACT for CONNECTORS. It supports wire sizes from 14 AWG to 12 AWG with STAMPED design. The RND PIN-SKT style contact is ideal for STRAIGHT mounting in various assembly products.
SXH-001T-P0.6
J S T Mfg
SXH-001T-P0.6 by J S T Mfg is a CRIMP terminal with 28-22 AWG wire size range, rated for 3A current at 250V AC/DC. Featuring bellowed contact design, it's ideal for applications requiring female contacts and operating temperatures from -25 to 85°C.
DF13-2630SCFA(81)
Hirose Electric
CONNECTOR ACCESSORY; Manufacturer Series: DF13;
02-08-1003
Molex
Molex 02-08-1003 CONTACT is a FEMALE CRIMP terminal made of BRASS. It features STRAIGHT mounting style and SQ PIN-SKT contact style. Ideal for assembly products requiring reliable electrical connections in various applications.
M23053/5-111-9
Dunbar Products
ASSEMBLY ITEMS; Construction: SINGLE WALL; MIL Conformity: NO; IEC Conformity: NO; DIN Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN;
66103-4
Tyco Electronics Amp
CONNECTOR ACCESSORY; Rated Current: 13 A; Contact Design: LOOSE; Maximum Wire Size: 20 AWG; Assembly Item Name: CONTACT; Finish Thickness: 30;
2858496
CONNECTOR ACCESSORY;
W4P
W4P by TE Connectivity is an assembly product for the DT SERIES, designed for power and signal applications. With a temperature range of -55 to 125°C, it accommodates wire sizes up to 0 AWG. Made of polybutylene terephthalate, it is ideal for various industrial and automotive electrical connections.
CLIPFIX35
TERMINAL BLOCK ACCESSORY; Assembly Item Name: END CLAMP; IEC Conformity: NO; Material: PA; Approvals (V): UL; DIN Conformity: NO;
43031-0009
Molex 43031-0009 CONTACT features loose contact design, suitable for 24-20 AWG wires. With 0.073" cable entry, it's used in assemblies like 43020, 43640, and 44300. Made of phosphor bronze with 0.137" terminal length, it's a male gender contact for straight mounting applications.
4-745130-5
CONNECTOR ACCESSORY; Shielding: YES; Wire Gauge (AWG): 0; MIL Conformity: NO; DIN Conformity: NO; Maximum Wire Size: 0 AWG;
0462-201-1631
TE Connectivity's 0462-201-1631 contact features a CRIMP terminal type, MACHINED contact design, and can handle temperatures from -55 to 150 °C. Ideal for applications requiring a FEMALE ROUND PIN-SOCKET contact style with wire sizes ranging from 20 to 16 AWG and rated current of 13 A.
249-117
Wago
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: END STOP; MIL Conformity: NO;
3505-29B
3m Electronic Products Division
CONNECTOR ACCESSORY; Manufacturer Series: 3505;
SPAL-001T-P0.5
SPAL-001T-P0.5 by J S T Mfg is a UL approved PAL connector with crimp terminal type, suitable for 26-22 AWG wires. It has a rated current of 3A and contact resistance of 25 mohm. Ideal for applications requiring male contact gender in straight mounting style at temperatures ranging from -25 to 85 °C.
1-1469492-1
TE Connectivity 1-1469492-1 is an Assembly Product with max. operating temp. of 105°C and min. operating temp. of -55°C. It features a max wire size of 0 AWG, rated current of 1A, and mounting style in right angle zinc alloy material. Ideal for guiding items in various applications.
5748676-2
TE Connectivity 5748676-2 is a backshell with 2 shell sizes, shielding, and 0.185" min cable entry. Ideal for plug/receptacle applications with max temp of 105°C. Features zinc alloy material, #4-40 screw mounting options, and supports up to 0 AWG wire size.
293736-1
TE Connectivity's 293736-1 is a male power contact with max operating temp of 85°C and min of -20°C. It supports wire size up to 0 AWG, made of polyamide. Ideal for assembly products requiring high-power connections in various industries.
3200043
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; Approvals (V): CSA; UL; Material: COPPER ALLOY; DIN Conformity: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-794610-1
CONNECTOR ACCESSORY; Rated Voltage: 250 V; Rated Current: 5 A; MIL Conformity: NO; DIN Conformity: NO; Finish Thickness: 15;
1-794606-1
TE Connectivity 1-794606-1 is a stranded crimp terminal with a rated voltage of 250V and a max operating temperature of 105°C. It is commonly used in power applications, with approvals from CSA, UL, and VDE.
1-794407-1
TE Connectivity's 1-794407-1 is a plug housing with a stranded construction and crimp terminal type. It has a rated voltage of 600V and can handle a max operating temperature of 105°C. This power design assembly product is commonly used for discrete wire applications, with a min cable entry size of 0.079 inch and max cable entry size of 0.126 inch.
1-794610-2
CONNECTOR ACCESSORY; Rated Voltage: 250 V; Rated Current: 5 A; Minimum Wire Size: 24 AWG; Mounting Style: STRAIGHT; Additional Features: TERMINATION: TIN OVER NICKEL;
1-794608-0
TE Connectivity 1-794608-0 is a male power contact with crimp terminal type. It has a rated voltage of 250V and can handle a max current of 5A. This contact is designed for use in assembly products, specifically for discrete wire cables with a min size of 24 AWG and max size of 20 AWG.
1-794612-1
CONNECTOR ACCESSORY; Rated Voltage: 250 V; Rated Current: 5 A; Assembly Item Name: CONTACT; Maximum Wire Size: 20 AWG; Rated DC Voltage: 250 V;
1-794772-0
CONNECTOR ACCESSORY; Maximum Operating Temperature: 90 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Material: POLYURETHANE; Usage: MINI UNIVERSAL MATE-N-LOK SEALED CONNECTOR;
1-794607-1
TE Connectivity 1-794607-1 CONTACT features CRIMP terminal type, STRANDED construction, and 0.14 mm2 cross section area. Ideal for DISCRETE WIRE applications with rated voltage of 250 V and current of 5 A. Suitable for wire sizes ranging from 30 to 26 AWG in POWER designs.
1-794607-2
TE Connectivity 1-794607-2 CONTACT has a rated voltage of 250V and can handle up to 5A current. With a construction of STRANDED and terminal type CRIMP, it is ideal for POWER applications requiring FEMALE contact gender.
1-794217-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 10.5 A; Finish Thickness: 29.92; Cross Section Area: 1.5 mm2; Design: SIGNAL;
1-794407-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Terminal Type: CRIMP; Wire Gauge (AWG): 16; Construction: STRANDED;
1-794223-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 10.5 A; Minimum Operating Temperature: -55 Cel; Design: POWER; Cross Section Area: 1.4 mm2;
1-794608-2
TE Connectivity 1-794608-2 is a male contact with crimp terminal type for discrete wire applications. It has a rated voltage of 250V, rated current of 5A, and can accommodate wire sizes from 24 to 20 AWG. Suitable for power design with a max operating temperature of 105°C.
1-794219-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 10.5 A; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: TIN (100) OVER NICKEL; Assembly Item Name: CONTACT; Maximum Cable Entry: .069 inch;
1-794611-2
TE Connectivity 1-794611-2 is a crimp terminal with stranded construction, rated for 250V and 5A. Ideal for discrete wire applications, it accommodates wire sizes from 30 to 26 AWG and operates b/w -40°C to 105°C.
1-794608-1
CONNECTOR ACCESSORY; Rated Voltage: 250 V; Rated Current: 5 A; Assembly Item Name: CONTACT; Minimum Operating Temperature: -40 Cel; Cross Section Area: .5 mm2;
1-794609-1
CONNECTOR ACCESSORY; Rated Voltage: 250 V; Rated Current: 5 A; Maximum Operating Temperature: 105 Cel; Material: BRASS; Maximum Wire Size: 26 AWG;
1-794612-2
CONNECTOR ACCESSORY; Rated Voltage: 250 V; Rated Current: 5 A; Assembly Item Name: CONTACT; Material: BRASS; Construction: STRANDED;
179417-1
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Minimum Wire Size: 22 AWG; Maximum Cable Entry: .083 inch; Contact Design: STAMPED; Maximum Wire Size: 18 AWG;
1-794609-2
CONNECTOR ACCESSORY; Rated Voltage: 250 V; Rated Current: 5 A; Cable Types: DISCRETE WIRE; Contact Gender: MALE; Material: BRASS;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved