Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 1-794607-2 CONTACT has a rated voltage of 250V and can handle up to 5A current. With a construction of STRANDED and terminal type CRIMP, it is ideal for POWER applications requiring FEMALE contact gender.
Median Price
$0.123
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Newark
1+ parts
$0.078
100+ parts
-
1k+ parts
10k+ parts
TE Connectivity
$0.220
$0.140
$0.100
Powell Electronics
$0.250
Mouser Electronics
Avnet
Verical
Chip1Stop
$0.104
$0.091
Heilind Electronics
Arrow
Master Electronics
$0.083
DigiKey
IBS Electronics
$0.116
TME
Electro Sonic
LIBRA Elektronik GmbH
Sensible Micro Corp
VNN
Nova Conductors
Semicontronic
$0.136
$0.133
$0.132
Perfect Parts
Glotronic Ltd.
Abacus Technologies
Authorized Procurement Solutions
Continental Prestige Electronics
Argo Parts USA
Robosynatics
$3.456
$3.200
Lucentia Tech
Aranea Global
Formix International (Excess)
EMSNET (Excess)
Assy Fe
The thick finish ensures durability and long-lasting performance of the product.
Stranded construction provides flexibility and resistance to wire breakage, making this product reliable for various applications.
Crimp terminals provide secure connections and easy installation, ensuring a reliable electrical connection.
With a high rated voltage, this product can be used in a wide range of electrical applications without the risk of voltage overload.
The minimum cable entry size allows for compatibility with a variety of cable sizes, providing versatility in usage.
The high maximum operating temperature ensures the product can withstand heat without compromising performance.
The low minimum operating temperature allows the product to function in cold environments without issues.
With a suitable wire gauge size, this product is compatible with a standard wire size making it easy to connect to various electrical components.
The contact assembly item provides a reliable connection point for electrical components, ensuring proper functionality.
The cross-section area indicates the capacity of the wire to conduct current, making this product suitable for low-power applications.
With a high rated current, this product can safely carry a significant amount of electrical current without overheating.
Designed for discrete wire cables, this product ensures compatibility with a specific type of wiring for secure connections.
The maximum cable entry size allows for compatibility with larger cable sizes, providing flexibility in usage.
The female contact gender ensures compatibility with male connectors, allowing for easy and secure connections.
Designed for power applications, this product is suitable for high-current or voltage applications where reliable connections are essential.
The straight mounting style provides a simple and secure installation method, ensuring the product stays in place during use.
Made from phosphor bronze, this product offers excellent conductivity and durability, ensuring long-term performance.
With a high rated DC voltage, this product can safely handle direct current applications without the risk of voltage overload.
Assembly Products 1-794607-2 attributes and parameters. Explore more Assembly Products devices from TE Connectivity
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Cable Types:
Connector Accessory Type:
Construction:
Contact Gender:
Cross Section Area:
DIN Conformity:
Design:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Rated Voltage:
Rated DC Voltage:
Terminal Type:
Wire Gauge (AWG):
Maximum Wire Size:
Minimum Wire Size:
1-794607-2 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
PCN Design/Specification - Multiple Drawings Document Clarification 23/Apr/2019
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
CRG0805F10K
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
CRG0805F10R
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
2N2222A
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
STM8S003F3P6TR
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
DF20F-2830SCFA
Hirose Electric
The Hirose Electric DF20F-2830SCFA is a crimp terminal with operating temperatures from -35°C to 85°C. It supports wire sizes ranging from 30 AWG to 28 AWG and is designed for use with UL1571 cables. The bellowed contact design and phosphor bronze material make it ideal for applications requiring reliable female contacts in straight mounting configurations.
M300-0010045
Harwin Plc
Harwin PLC's M300-0010045 CONTACT features CRIMP terminal type, 175°C max operating temp, -65°C min operating temp. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and ROUND PIN-SOCKET contact style. Supports wire sizes from 20 AWG to 18 AWG with a rated current of 10 A.
776363-1
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -40 Cel;
1766274-1
TE Connectivity's 1766274-1 is a male power contact with copper alloy material, rated for 200A current. It has a finish thickness of 200µm and operates b/w -55°C to 105°C. Ideal for applications requiring straight mounting and accommodating up to 0 AWG wire sizes.
SVH-41T-P1.1
J S T Mfg
SVH-41T-P1.1 by J S T Mfg is a CRIMP terminal with approvals from CSA, TUV, and UL. It supports wire sizes from 20 AWG to 16 AWG, rated for 10 A current at 250 V AC/DC. Ideal for applications requiring FEMALE contacts with SQUARE PIN-SOCKET style in straight mounting configuration.
M23053/5-103-9
3m Electronic Products Division
ASSEMBLY ITEMS; Construction: SINGLE WALL; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN;
DF14-3032SCFA
DF14-3032SCFA by Hirose Electric is a crimp contact assembly product with UL approval. It features bellowed female contacts for 32-30 AWG wires, suitable for UL1571 cables. The straight mounting style and phosphor bronze material make it ideal for various electronic applications.
963225-1
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
3001
Keystone Electronics
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: BATTERY CONTACT; Terminal Type: SOLDER; Material: PHOSPHOR BRONZE;
3032457
Phoenix Contact
TERMINAL BLOCK ACCESSORY;
PCS-E36LKPB
Honda Tsushin Kogyo
CONNECTOR ACCESSORY; Mounting Option-1: M2.5; Material: ZINC ALLOY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: PROTECTIVE COVER;
963531-1
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 130 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
1SNK900001R0000
TE Connectivity's 1SNK900001R0000 is a UL-approved terminal block with insulator material POLYAMIDE. It has a wide operating temperature range (-55 to 110 °C) and supports wire sizes up to 0 AWG. Ideal for various assembly applications requiring secure wire connections.
030-1952-000
The ITT Cannon 030-1952-000 is a male contact assembly product with a crimp terminal type. It has a max operating temperature of 105°C and is rated for AC voltage up to 1000V. This contact is made of copper alloy and is commonly used in applications requiring a round pin-socket contact design.
13654421
Delphi Connection Systems
CONNECTOR ACCESSORY;
SHF-001T-0.8BS
SHF-001T-0.8BS by J S T Mfg is a CRIMP terminal for SM SERIES CONNECTOR with 3A rated current, 20 mohm contact resistance, and 0.047-0.071 inch cable entry. It operates b/w -25 to 85 °C and supports 250V AC/DC voltage. Ideal for female contacts in assembly products requiring a straight mounting style.
W3S-1939-P012
TE Connectivity's W3S-1939-P012, part of Assembly Products, is designed for DT SERIES applications. With a temperature range of -55 to 125°C, it accommodates up to 0 AWG wire size. The POWER AND SIGNAL design features POLYBUTYLENE TEREPHTHALATE material for reliable performance.
RJFTVC2G
Amphenol
CONNECTOR ACCESSORY; Approvals (V): UL; Maximum Operating Temperature: 85 Cel; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO;
C88E000218M26S
Northern Technologies
CONNECTOR ACCESSORY; Mounting Option-1: M2.6; DIN Conformity: NO; Assembly Item Name: COVER ITEM; Mounting Option-2: SCREW; Material: ZINC ALLOY;
M85049/128-4
CONNECTOR ACCESSORY; Material: STEEL; Minimum Operating Temperature: -65 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 200 Cel; Wire Gauge (AWG): 0;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1-794610-1
CONNECTOR ACCESSORY; Rated Voltage: 250 V; Rated Current: 5 A; MIL Conformity: NO; DIN Conformity: NO; Finish Thickness: 15;
1-794606-1
TE Connectivity 1-794606-1 is a stranded crimp terminal with a rated voltage of 250V and a max operating temperature of 105°C. It is commonly used in power applications, with approvals from CSA, UL, and VDE.
1-794606-2
TE Connectivity 1-794606-2 is a crimp terminal with approvals from CSA, UL, and VDE. Featuring stranded construction, it has a rated voltage of 250V and can accommodate wire sizes ranging from 24 to 20 AWG. Ideal for power applications with a max current of 5A, this female contact is designed for use in discrete wire cables up to 0.06 inch entry size.
1-794407-1
TE Connectivity's 1-794407-1 is a plug housing with a stranded construction and crimp terminal type. It has a rated voltage of 600V and can handle a max operating temperature of 105°C. This power design assembly product is commonly used for discrete wire applications, with a min cable entry size of 0.079 inch and max cable entry size of 0.126 inch.
1-794610-2
CONNECTOR ACCESSORY; Rated Voltage: 250 V; Rated Current: 5 A; Minimum Wire Size: 24 AWG; Mounting Style: STRAIGHT; Additional Features: TERMINATION: TIN OVER NICKEL;
1-794608-0
TE Connectivity 1-794608-0 is a male power contact with crimp terminal type. It has a rated voltage of 250V and can handle a max current of 5A. This contact is designed for use in assembly products, specifically for discrete wire cables with a min size of 24 AWG and max size of 20 AWG.
1-794612-1
CONNECTOR ACCESSORY; Rated Voltage: 250 V; Rated Current: 5 A; Assembly Item Name: CONTACT; Maximum Wire Size: 20 AWG; Rated DC Voltage: 250 V;
1-794772-0
CONNECTOR ACCESSORY; Maximum Operating Temperature: 90 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Material: POLYURETHANE; Usage: MINI UNIVERSAL MATE-N-LOK SEALED CONNECTOR;
1-794607-1
TE Connectivity 1-794607-1 CONTACT features CRIMP terminal type, STRANDED construction, and 0.14 mm2 cross section area. Ideal for DISCRETE WIRE applications with rated voltage of 250 V and current of 5 A. Suitable for wire sizes ranging from 30 to 26 AWG in POWER designs.
1-794217-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 10.5 A; Finish Thickness: 29.92; Cross Section Area: 1.5 mm2; Design: SIGNAL;
1-794407-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 11.2 A; Terminal Type: CRIMP; Wire Gauge (AWG): 16; Construction: STRANDED;
1-794223-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 10.5 A; Minimum Operating Temperature: -55 Cel; Design: POWER; Cross Section Area: 1.4 mm2;
1-794608-2
TE Connectivity 1-794608-2 is a male contact with crimp terminal type for discrete wire applications. It has a rated voltage of 250V, rated current of 5A, and can accommodate wire sizes from 24 to 20 AWG. Suitable for power design with a max operating temperature of 105°C.
1-794219-0
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 10.5 A; Additional Features: UNDERPLATING THICKNESS (50), TERMINATION: TIN (100) OVER NICKEL; Assembly Item Name: CONTACT; Maximum Cable Entry: .069 inch;
1-794611-2
TE Connectivity 1-794611-2 is a crimp terminal with stranded construction, rated for 250V and 5A. Ideal for discrete wire applications, it accommodates wire sizes from 30 to 26 AWG and operates b/w -40°C to 105°C.
1-794608-1
CONNECTOR ACCESSORY; Rated Voltage: 250 V; Rated Current: 5 A; Assembly Item Name: CONTACT; Minimum Operating Temperature: -40 Cel; Cross Section Area: .5 mm2;
1-794609-1
CONNECTOR ACCESSORY; Rated Voltage: 250 V; Rated Current: 5 A; Maximum Operating Temperature: 105 Cel; Material: BRASS; Maximum Wire Size: 26 AWG;
1-794612-2
CONNECTOR ACCESSORY; Rated Voltage: 250 V; Rated Current: 5 A; Assembly Item Name: CONTACT; Material: BRASS; Construction: STRANDED;
179417-1
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Minimum Wire Size: 22 AWG; Maximum Cable Entry: .083 inch; Contact Design: STAMPED; Maximum Wire Size: 18 AWG;
1-794609-2
CONNECTOR ACCESSORY; Rated Voltage: 250 V; Rated Current: 5 A; Cable Types: DISCRETE WIRE; Contact Gender: MALE; Material: BRASS;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved